CPU Socket | 2011 (SquareType,80 x 80mm mounting pitch) |
|
CPU Support | Intel® Sandy Bridge Romley-EP/EX Processors up to TDP 160 Watts overclocking |
|
Solution | 3U&Up, Workstation & Tower Desktop Solution |
|
Overall Dimension | 91.0 x 91.0 x 110.0 mm |
|
Weight | 530 g |
|
Material | Aluminum Fins, 4x Heat Pipes with H.C.C. Technology |
|
Fan Dimension | Ø92 x 25 mm |
|
Speed | At Duty Cycle 20%: 1000 RPM
At Duty Cycle 50%: 1800 RPM
At Duty Cycle 100%: 2500 RPM |
|
Bearing | 2 Ball Bearing |
|
Rated Voltage | 12 V |
|
Power | At Duty Cycle 20%: 0.96 W
At Duty Cycle 50%: 1.44 W
At Duty Cycle 100%: 3.0 W |
|
Air Flow | At Duty Cycle 20%: 17.34 CFM
At Duty Cycle 50%: 31.21 CFM
At Duty Cycle 100%: 43.36 CFM |
|
Noise Level | At Duty Cycle 20%: 17.0 dBA
At Duty Cycle 50%: 24.78 dBA
At Duty Cycle 100%: 31.92 dBA |
|
Air Pressure | At Duty Cycle 20%: 0.48 mm-H2O
At Duty Cycle 50%: 1.55 mm-H2O
At Duty Cycle 100%: 3.0 mm-H2O |
|
Lead Wire Pin Out | Pin1- (-)
Pin2- (+)
Pin3- (Techometer/Signal output)
Pin4- (PWM) |
|
Cooling Performance VS. Airflow (Wind Tunnel Simulation) | |
|
Note | 1. Support CPU Power up to 160 Watts
2. Pre-print thermal compound Shin-Etsu G751
3. RoHS Compliance
4. Backplate is not included |