超微 X8QBE-LF 四路服务器主板 支持 XEON E7-4800 4820 4830等

京-AMD-刘辉

• 5 w/ PCI-E 2.0 4-Way Xeon 7500 ServerBoard Key Features 1. Intel® Xeon® processor 7500     series (8-Core) or new gen. Intel®     Xeon® processors E7-4800 family     (10-Core), with QPI up to 6.4 GT/s 2. Intel® 7500 (Boxboro-EX) Chipset 3. Up to 1TB DDR3 1333*/1066/800     MHz ECC Registered DIMM 4. Intel® 82576 Dual-Port Gigabit     Ethernet Controller 5. 6x SATA2 (3 Gbps) Ports via     ICH10R Controller 6. 2 (x16) PCI-E 2.0, or     2 (x4) PCI-E 2.0 & 1 (x8) PCI-E 2.0 or     3 (x8) PCI-E 2.0 & 2 (x4) PCI-E 7. Integrated Matrox G200eW Graphics 8. Integrated IPMI 2.0 with Dedicated LAN Links & Resources [url=]Tested Memory List[/url] [url=]Update Your BIOS[/url] [url=]IPMI Firmware[/url] [url=]Download the Latest Drivers and Utilities[/url] [url=][/url]

Product SKUs MBD-X8QBE-LF -O X8QBE-LF (Standard Retail Pack) MBD-X8QBE-LF -B X8QBE-LF (Bulk Pack) Physical Stats Form Factor Proprietary Dimensions 16.4" x 16.79" (41.66cm x 42.65cm) Processor/Cache CPU Quad 1567-pin LGA Sockets Supports up to four Intel® Xeon® 64-bit processor(s) of the same type below: Intel® Xeon® processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-4800 family (10-core, codename Westmere-EX) QPI up to 6.4 GT/s System Memory Memory Capacity 32x 240-pin DIMM sockets Supports up to 1024 GB 1066 / 978 / 800MHz DDR3 ECC Registered memory Memory Mirroring supported Memory Type 1333* / 1066 / 978 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 1GB, 2GB, 4GB , 8GB , 32GB** Memory Voltage 1.5 V, 1.35V** Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) On-Board Devices Chipset Intel® 7500 (Boxboro-EX) chipset ICH10R SATA Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux) IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond® WPCM450 BMC Network Controllers Intel® 82576 Dual-Port Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) Graphics Matrox G200eW 16 MB DDR2 Super I/O Winbond 83527HB chip Input / Output Serial ATA Six Serial ATA ports Six SATA hard drives supported LAN 3x RJ45 LAN ports USB 2x USB rear ports 2x USB internal headers (3 ports) Total 5 USB 2.0 Compliant VGA 1x VGA Port Serial Port / Header 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header Chassis ( Optimized for X8QBE-LF ) 2U Chassis [url=]CSE-828TQ-R1400LPB[/url] (rev. K required, Air Shroud MCP-310-82805-0B) Tower / 4U Rackmount [url=]CSE-418E16-R1K62B[/url] [url=]CSE-748TQ-R1400B[/url] [url=]CSE-848A-R1K62B[/url] [url=]CSE-848E16-R1K62B[/url] (for SC748, rev. K required, Air Shroud MCP-310-74805-0B) (for SC848 & 418, rev. K required, Air Shroud MCP-310-84803-0B) Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, a [url=]Revision K[/url] chassis is recommended for most models. Please talk to your sales representative or follow the link for details. Expansion Slots PCI-Express 2 (x16) PCI-E 2.0, or 2 (x4) PCI-E 2.0 & 1 (x8) PCI-E 2.0 or 3 (x8) PCI-E 2.0 & 2 (x4) PCI-E System BIOS BIOS Type 32Mb SPI Flash EEPROM with AMI® BIOS BIOS Features Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support Management Software IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support [url=]SuperDoctor® III[/url] Power Configurations ACPI / ACPM Power Management PC Health Monitoring Voltage Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages. 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V FAN Total of 10 fan headers supporting up to 10 fans Ten 4-pin fan headers 10x fans with tachometer status monitoring Support 4-pin fans (w/o speed control) Low noise fan speed control Temperature Monitoring for CPU and chassis environment Thermal Control for 8x fan connectors PECI Other Features Chassis intrusion detection Chassis intrusion header Operating Environment / Compliance RoHS [url=][/url] [url=]RoHS Compliant 6/6, Pb Free[/url] Environmental Spec. Operating Temperature: 10° to 35° C (50° to 95°F) Non-operating Temperature: -40° to 70° C (-40° to 158° F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)

Parts List Part Number Qty Description X8QBE-LF MBD-X8QBE-LF -O 1 X8QBE-LF Motherboard I/O shield MCP-260-00036-0N 1 Standard Size I/O shield for X8QB6-F and X8QBE-F Optional Parts List Part Number Qty Description Cable CBL-0420L - 27" BBU extension to LSI iBBU07