|
|
|
| | [url=][/url] | [url=]Super X9DRG-OF-CPU[/url] |
| | |
|
| | Key Features
8x GPUs in 4U
1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
2. Up to 1.5TB ECC DDR3, up to 1866MHz;
24x DIMM sockets
3. Expansion slots:
8 PCI-E 3.0 x16 (double-width) slots
2 PCI-E 3.0 x8 (in x16) slot
1 PCI-E 2.0 x4 (in x16) slot
4. Intel® i350 Dual port GbE LAN
5. I/O ports: 2x Gb LAN, 1x Dedicated
LAN for IPMI Remote Management,
1x VGA, 10x USB 2.0
6. 24x 2.5" Hot-swap SAS2/SATA3 HDD
Bays
7. 1600W Redundant Power Supplies
Platinum Level (94%+)
| |
[url=]Drivers & Utilities[/url] [url=]BIOS[/url] [url=]IPMI[/url] [url=]Tested MEM[/url] [url=]Tested HDD[/url] [url=]Manuals[/url]
[url=]OS Certification Matrix[/url] [url=]Compatible GPU List[/url] |
|
|
| | | | | Product SKUs | | SYS-4027GR-TR | - SuperServer 4027GR-TR (Black)
|
| Motherboard | |
[url=]Super X9DRG-OF-CPU[/url] |
| Processor/Cache | | CPU | - Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 150W TDP **) - Dual Socket R (LGA 2011)
| Cache | | System Bus | | Note | † BIOS version 3.0 or above is required | Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support |
[url=]GPU/Xeon Phi Support[/url] | - K10/K20/K20X/K1/K2 (Kepler), up to 150W CPU at 30°C
- K40 (Atlas), up to 150W CPU at 30°C
- [url=]Xeon Phi[/url], up to 150W CPU at 30°C
|
| System Memory | | Memory Capacity | - 24x 240-pin DDR3 DIMM sockets
- Up to 1.5TB DDR3 ECC LRDIMM
- Up to 768GB DDR3 ECC RDIMM
- Up to 192GB DDR3 ECC/non-ECC UDIMM
| Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
| DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| On-Board Devices | | Chipset | | AHCI SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1
| SCU SATA | - SATA 2.0 3Gbps with RAID 0, 1, 10
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| Network Controllers | - Intel® i350 Dual port GbE LAN
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10Base-T , 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| Graphics | - Matrox G200 (Nuvoton WPCM450 BMC)
| Super I/O | |
| Input / Output | | AHCI SATA | - 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
| SCU SATA | - 4x SATA 2.0 ports (3Gbps)
| LAN | - 2x RJ45 10GBase-T ports
- 1x dedicated LAN port for IPMI
| USB | - 9x USB 2.0 ports total
(4x rear + 4x via header + 1x Type A)
| Serial Port / Header | - 1x Fast UART 16550 ports: 1 header
|
| System BIOS | | BIOS Type | - 16MB SPI Flash EEPROM with AMI® BIOS
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| | | Chassis | | Form Factor | - 4U Rackmountable
- Rackmount Kit (MCP-290-00057-0N)
| Model | |
| Dimensions | | Height | | Width | | Depth | | Weight | - Net Weight: 80 lbs (36.2 kg)
- Gross Weight: 135 lbs (61.2 kg)
| Available Colors | |
| Expansion Slots | | PCI-Express | - 8x PCI-E 3.0 x16 (double-width) slots
- 2x PCI-E 3.0 x8 (in x16) slot
- 1x PCI-E 2.0 x4 (in x16) slot
li>
|
| Backplane | | SAS/SATA HDD Backplane |
| System Cooling | | Fans | - 8x 92mm RPM Hot-Swappable Cooling Fans
| Shrouds | - 1x Air Shroud (MCP-310-84806-0B)
- 1x Air Shroud (MCP-310-84807-0B)
|
| Power Supply | | 1000W/1600W 1U Redundant Power Supply | AC Input | - 1000W @ 100-127V, 12.9A Max., 50-60Hz
- 1600W @ 200-240V, 9.5A Max., 50-60Hz
| DC Output | - 1000W: +12V/82A; +12Vsb/2A
- 1600W: +12V/132A; +12Vsb/2A
| Certification | [url=][/url] Platinum Level
(Cert. in progress)
|
| PC Health Monitoring | | CPU | - Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
| FAN | - 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
| Temperature | - Monitoring for CPU and system environment
- Thermal Control for 8x fan connectors
| Other Features | - Chassis intrusion detection
|
| Operating Environment / Compliance | | RoHS
| | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
| |
|
|