请教一个问题关于H700接intel 六位扩展笼子的问题。

thenero · 发表于 2011-6-27 21:29

本帖最后由 thenero 于 2011-6-27 21:30 编辑

請教一個問題 h700接AXX6DRV3GEXP开机报错

進系統接MSN提示ID = 2999
SEQUENCE NUMBER = 2478522
TIME = 27-06-2011 20:43:15
LOCALIZED MESSAGE = Controller ID:  0  Device inserted Device Type:    Enclosure  Device Id: 32

ID = 2998
SEQUENCE NUMBER = 2478521
TIME = 27-06-2011 20:43:15
LOCALIZED MESSAGE = Controller ID:  0 PD inserted:    :32

ID = 2997
SEQUENCE NUMBER = 2478520
TIME = 27-06-2011 20:43:15
LOCALIZED MESSAGE = Controller ID:  0 Power supply removed on enclosure: 00:0    Power Supply 1

ID = 2996
SEQUENCE NUMBER = 2478519
TIME = 27-06-2011 20:43:15
LOCALIZED MESSAGE = Controller ID:  0 Communication restored on enclosure:    00:0

ID = 2995
SEQUENCE NUMBER = 2478518
TIME = 27-06-2011 20:43:14
LOCALIZED MESSAGE = Controller ID:  0 SES enclosure discovered:    00:0

ID = 2994
SEQUENCE NUMBER = 2478517
TIME = 27-06-2011 20:43:11
LOCALIZED MESSAGE = Controller ID:  0 Fatal firmware error:    External Enclosure Pd 20 violation detected in Direct PD Mapping mode請問是什麽問題有辦法解決么？

求高人指点

stephenmaxmax · 发表于 2011-6-27 21:48

h700。。
对expander或笼子的支持就是这样的

不然也不会有人放着便宜的h700不买，去买贵的原厂9260

五湖废人 · 发表于 2011-6-27 22:48

关闭/打开卡的DirectMapping试试看~~

thenero · 发表于 2011-6-27 23:01

回复五湖废人的帖子

咋个该法

per1-q1222 · 发表于 2011-6-27 23:05

H700預設是把Direct PD Mapping開起來.....
對於Expander會遇到問題..
用MegaCLI把它關掉..

thenero · 发表于 2011-6-27 23:06

MegaCLI 那里有的下啊

per1-q1222 · 发表于 2011-6-27 23:11

www.lsi.com

C:\cli>megacli64 -directpdmapping -dsply -a0
Adapter 0: Direct Pd Mapping is: Disabled
Exit Code: 0x00

C:\cli>megacli64 -h -directpdmapping

   MegaCLI SAS RAID Management Tool  Ver 8.01.06 Dec 23, 2010
(c)Copyright 2010, LSI Corporation, All Rights Reserved.
            DirectPdMapping
            ---------------
Syntax: MegaCli -DirectPdMapping -Enbl|-Dsbl|-Dsply -aN|-a0,1,2|-aALL
Description:
      Command sets the mapping mode of physical drive.
      The possible parameters are:
      Enbl: Enables Direct physical drive mapping mode.
      Dsbl: Disables Direct physical drive mapping mode.
      Dsply: Displays current state of direct physical drive mapping.
Convention:
      -aN       N specifies the adapter number for the command.
      -a0,1,2    Specifies the command is for adapters 0, 1, and 2. More than one adapter can be selected.
      -aALL    Specifies the command is for all adapters.
Exit Code: 0x00

thenero · 发表于 2011-6-27 23:28

回复 per1-q1222 的帖子

谢谢帮助研究中

thenero · 发表于 2011-6-27 23:30

回复 per1-q1222 的帖子

Invalid input at or near token -directpdmapping ？？請問下是我軟件下的不對？

per1-q1222 · 发表于 2011-6-27 23:36

thenero 发表于 2011-6-27 23:30
回复 per1-q1222 的帖子

Invalid input at or near token -directpdmapping ？？請問下是我軟件下的不對？ ...

不是...
你要仔細看英文解釋...
這一看就知道你命令下的不對了...

thenero · 发表于 2011-6-27 23:46

奇怪了
CreateFile failed with error: 5
CreateFile failed with error: 5
CreateFile failed with error: 5
ERROR:Could not detect controller.
Failed to get ControllerId List.
Failed to get CpController object.

Exit Code: 0x01

thenero · 发表于 2011-6-27 23:49

回复 per1-q1222 的帖子

megacli64 -h -directpdmapping 這條沒問題另一條不行

per1-q1222 · 发表于 2011-6-27 23:55

thenero 发表于 2011-6-27 23:49
回复 per1-q1222 的帖子

megacli64 -h -directpdmapping 這條沒問題另一條不行

這條命令是用來提供對參數(arguments)的說明...

megacli64 -directpdmapping -dsbl -aall
則是把directpdmapping關閉...

per1-q1222 · 发表于 2011-6-27 23:56

本帖最后由 per1-q1222 于 2011-6-27 23:57 编辑

thenero 发表于 2011-6-27 23:46
奇怪了
CreateFile failed with error: 5
CreateFile failed with error: 5

請問你有透過系統管理員權限來操作megacli嗎?..

這已經牽涉到深層的kernel mode來操作了...

thenero · 发表于 2011-6-28 00:05

回复 per1-q1222 的帖子

我重啟下看看

thenero · 发表于 2011-6-28 00:27

回复 per1-q1222 的帖子

搞定{titter:] PER1还是一如既往的熱心啊，感謝一下

帐号		自动登录	找回密码
密码			注册

请教一个问题关于H700接intel 六位扩展笼子的问题。

本帖子中包含更多资源