POPPUR爱换

标题: 请教Inrtel PILA8465问题 [打印本页]

作者: hanya 时间: 2008-11-17 14:17
标题: 请教Inrtel PILA8465问题
产品说明：
PCB顶部标示：INTEL PILA8465。
有3块大芯片，摘要标示如下。
芯片1上标示：KU82556  L5142763。
芯片2上标示：LSI L5A4242 INTEL 202513-302 NNG9508 WK76316 HONGKONG。
芯片3上标示：PLX F52D 342  PCI 9036C1。

请教：1.该产品是否为全双工？用于BT下载是否合适?（热量、功耗）
      2.如何安装驱动？在XP下无法安装，听说要在DOS下才行，试了几次都是失败。
若有XP下的驱动，麻烦提供。
谢谢！

作者: hanya 时间: 2008-11-17 19:39
请高人指教,谢谢!

作者: littlemouse 时间: 2008-11-19 10:40
http://support.intel.com/support ... sa/sb/cs-016083.htm

Where can I get Windows* XP drivers for the PRO/100 EISA and PCI Adapters?
No Windows* XP drivers are available for the obsolete Intel® PRO/100 EISA or PCI adapters. The original PRO/100 PCI adapter was discontinued in early 1996 and should not be confused with the later PRO/100 PCI adapters, such as the PRO/100B, PRO/100+, or PRO/100 S families of adapters. The original PRO/100 PCI adapter can be identified by its large size (approximately 6¾ inches long and 4¼ inches high), its part number (351361-xxx) and the presence of 4 LEDs on the mounting bracket.

扔了，随便找块559或550算了

[ 本帖最后由 littlemouse 于 2008-11-19 10:44 编辑 ]

作者: hanya 时间: 2008-11-19 13:29
确实如此，不过有时拿出来看看做工，就留作收藏了。
谢谢楼上回复。

欢迎光临 POPPUR爱换 (https://we.poppur.com/)