目前设置如下：
ai overclock tunner:manual
cpu ratio setting:auto
fsb strap to north bridge:auto
fsb frequency:480
pcie frequency:101
dram frequency:ddr2-961
dram command rate:2n
dram timming control:manual
timming information:5-5-5-15-3-42-6-3-3
dram static read control:enable
transaction booster:auto
cpu voltage:1.275v
cpu pll voltage:1.6v
fsb termination voltage:1.2v
dram voltage:1.85v
nb voltage:1.55v
sb voltage:1.05v
clock over-charging voltage:0.80v
load-line calibration:enable
cpu GTL voltage reference:0.63x
NB GTL voltage reference:0.67x
cpu spread spectrum:disable
pcie spread spectrum:disable
cpu clock skew:delay 300ps
NB clock skew:delay 100ps作者: shawnpu82 时间: 2009-6-19 23:18
fsb frequency:100
内存1：1其余auto
dram voltage:1.95v
nb voltage:默认即可
cpu GTL voltage reference:0.59x
NB GTL voltage reference:0.61x
cpu clock skew:auto
NB clock skew:auto
其余不用改了，都auto作者: phillo 时间: 2009-6-20 02:01
dram static read control:enable
关掉这个作者: e0ily 时间: 2009-6-20 13:23
谢楼上两位，我都试了，不行。。。问题出在哪儿呢？作者: arkee100 时间: 2009-6-20 15:44
U体质不行。。。。作者: shawnpu82 时间: 2009-6-20 17:40
先把倍频设7再看看吧，不行的话可能内存体制问题作者: wukefei1219 时间: 2009-6-21 14:59
CO的E8200,感觉是这U不行。