标题: 刷了090928版的固件.ocz v2在win7总评分6.4 [打印本页] 作者: schmucher 时间: 2009-12-25 10:58 标题: 刷了090928版的固件.ocz v2在win7总评分6.4 感谢51nb论坛的热心兄弟，提供了数码之家最新jm602量产工具，刷新之后，win7硬盘评分从5.9升到了6.4，这还是不带缓存的v2版，x61还存在限速的问题，在台机上2块山寨ssd刷过之后,raid0得分7.2，intel g2版的单盘得分7.4，看来新固件还是值得尝试的。
History:
080721 : 08/08/18 release
---------------------------------------------------------------------------------------------------------------------------------
080722 : 08/08/29 release
* Turn on sata noise resist register
---------------------------------------------------------------------------------------------------------------------------------
080827 : Support 4BANK with Bank#0/#4/#8/#12 layout configuration.
(Original. support 4-BANK with Bank#0/#1/#4/#5 layout configuration)
---------------------------------------------------------------------------------------------------------------------------------
081016 :1. New support flash: 1)Toshiba G4S; 2)Samsung K9F4G; 3)Hynix H27UBG,H27UCG; 4)Intel 64GFAMC1,08GAAMC1;
2. Support SATA HIPM and DIPM slumber/partial mode. (if SlumberEnable=1, default SlumberEnable=0 in 'JMMassProd.ini')
3. Add Security Erase (GPIO#1 low active). (if SecurityEraseEnable=1, default securityEraseEnable=0 in 'JMMassProd.ini')
4. Flexible 2~8 channels capacity.
---------------------------------------------------------------------------------------------------------------------------------
081021 :1. Fix S3,S4 security lock.
2. Add ATA command 0x91 and 0x10 pass Security Lock state
---------------------------------------------------------------------------------------------------------------------------------
081027 :1. Fix power-cycling at wear-leveling
---------------------------------------------------------------------------------------------------------------------------------
081210 :1. Support LBA48, NCQ(one queue only), Max 8-bank (support 1/2/4/6/8-bank configuration)
2. Support LBA28, Max 4-bank (support 1/2/4-bank configuration)
3. Fix ATA security compatibility. (same behavior as SATA HDD)
4. USB LED GPIO#14 is selected by MPTOOL INI file. (default is HDDA LED)
5. New support flash: 1)Toshiba G6D; 2)Samsung K9GAGD; 3)Micron 32GMAA 4)Intel 32GAAMD1
LBA28_special version LED note:
JMMassProd.iniUsbLedP14=1
SATA inesrt: HDDA=H, data read/write: HDDA=HLHL
USB insert: GPIO14=H, data read/write: GPIO14=HLHL
JMMassProd.iniUsbLedP14=0
SATA inesrt: HDDA=H, data read/write: HDDA=HLHL
USB insert: HDDA=H, data read/write: HDDA=HLHL
LBA28 LED note:
JMMassProd.iniUsbLedP14=1
SATA inesrt: HDDA=H, data read/write: HDDA=L
USB insert: GPIO14=H, data read/write: GPIO14=HLHL
JMMassProd.iniUsbLedP14=0
SATA inesrt: HDDA=H, data read/write: HDDA=L
USB insert: HDDA=H, data read/write: HDDA=HLHL
LBA48 LED note:
JMMassProd.iniUsbLedP14=1
SATA inesrt: HDDA=H, data read/write: HDDA=HLHL
USB insert: GPIO14=H, data read/write: GPIO14=HLHL
JMMassProd.iniUsbLedP14=0
SATA inesrt: HDDA=H, data read/write: HDDA=HLHL
USB insert: HDDA=H, data read/write: HDDA=HLHL
---------------------------------------------------------------------------------------------------------------------------------
090310 :1. remove "Write Cache" feature in ID information data.
2. LBA48 version remove "NCQ support" feature in ID information data. (code size over limit)
3. Fix Security issue: BIOS set password then reboot, BIOS didn't prompt "enter password".
Now, BIOS will prompt "enter password"
4. Fine tune flash buffer management to reduce OS freeze feeling.
5. Support new Flash.
----------------------------------------------------------------------------------------------------------------------------------
090331 :1. Fixed LBA48 sectorCount=0 DMAread fail issue.
2. Fixed Micron 128Gb flash 4-bank case fail.
3. Fine tune Flash buffer management to reduce OS freeze feeling.
----------------------------------------------------------------------------------------------------------------------------------
090818 : 1.Update USB DTM for WHQL.
2.Add HYNIX FLASH support list.
3.Add SSP ATA feature set.
----------------------------------------------------------------------------------------------------------------------------------
090928 : 1.Solve lose code block issue.作者: schmucher 时间: 2009-12-25 11:01 http://www.51nb.com/forum/redire ... 027&ptid=921725固件在这里下载作者: schmucher 时间: 2009-12-25 12:27 本帖最后由 schmucher 于 2009-12-25 13:44 编辑