标题: 有关P221W用SV搭配colormunki的問題，熊猫兄及Hair121等各位达人乱入！ [打印本页] 作者: thebigone 时间: 2010-8-9 18:11 标题: 有关P221W用SV搭配colormunki的問題，熊猫兄及Hair121等各位达人乱入！ 兄弟现在系统环境是windows 7 64位旗舰版，用SpectraViewII配合colormunki的時候,
SVII检测不到colormunki,而colormunki本身自带的软件可顺利激活并使用。在本坛搜索后得知，hair121兄也遇到过此问题，并已解决，肯请hair121兄现身说法。给小弟提供一下解决办法，小弟不胜感激！作者: thebigone 时间: 2010-8-9 18:16
刚才在网上搜索到这么一条：
My ColorMunki is not working with SpectraView 2 or ColorNavigator
Thank you for rating this answer.
First thing to check is that the USB cable is sitting properly in the ColorMunki - the case is poorly designed and can stop the USB cable connecting properly. Re-seat the cable until you're sure it's in properly (firmly but gently!).
This also occurs in all cases with ColorMunki software from version 1.1 onwards. The fix is relatively simple (and is documented in the readme file with SpectraView 2) - the fix is the same for ColorNavigator.
X-Rite ColorMunki color sensor:
If the X-Rite ColorMunki software is installed, it will prevent SV2 from accessing the device even if the main ColorMunki application is not currently running.
If you are using the ColorMunki software prior to version 1.1.0:
NEC SV2will detect if the ColorMunki software is running and give the option of closing it automatically. To use the ColorMunki software again after SV2 has closed it, you must run the colormunki.exe application from the Startup menu in Windows.
If you are using the ColorMunki software version 1.1.0 or newer:
You must turn off the ColorMunki Service in the Windows Control Panel > "X-Rite Device Services" to allow NEC Display Wall Calibrator to access the device.
To use the ColorMunki software again you must turn the ColorMunki Service back on.
FOR BOTH:
It is not recommended to connect this device using either USB extension cables or USB hubs as it may cause errors detecting or taking measurements from the device. Whenever possible connect it directly to the host PC.
英文不好，前几段不明白，最后三段好像是解决办法，就是说colormunki软件在1.1.0或更新的版本中，可以在“控制面板”里的“Xrite服务”中允许NEC的访问，我现在办公室，回去以后测试，看能否解决这个问题。作者: thebigone 时间: 2010-8-9 19:56
参照此条：If you are using the ColorMunki software version 1.1.0 or newer:
You must turn off the ColorMunki Service in the Windows Control Panel > "X-Rite Device Services" to allow NEC Display Wall Calibrator to access the device.
问题已得到解决。谢谢大家！作者: thebigone 时间: 2010-8-9 22:21
经过colormunki平均2遍的测试，NEC P221W的DELTA E值有点出乎我的意料，在SV软件photo edit模式下，DELTA E的最大值到了2.X，最小1.X平均1.X。看来熊猫兄在测试时对色度计校准后的结果乐观了。性价比就是那么回事，建议对显示器要求高的，还是老老实实上EIZO CG系列和NEC 90系列、PA系列吧。
当然，本人的测试成绩是否和colormunki的精度以及thinkpad X61T的内置intel 965显卡有关，有待我的i1 XT到货后，再在办公室的工作用机上（quadro FX580显卡）做个测试吧。作者: SlayeRPanda 时间: 2010-8-10 00:32
问题解决了就好。至于DE值很大的问题，一方面P221W本身的精度就不如90系列，不过你可以尝试下使用SV2软件的老版本看看，据说新版本的校准结果不如老版本 - 为了针对PA优化似乎做出了一定的牺牲。