POPPUR爱换

标题: Dell PERC H700 RAID卡解除非Dell HDD限制 [打印本页]

作者: zhangkui00    时间: 2010-11-17 18:06
标题: Dell PERC H700 RAID卡解除非Dell HDD限制
Dell PERC H700 Raid Card Firmware
Release Date: 7/6/2010
Version: 12.3.0-0032

Fixes and Enhancements:
Fixes
=========
1. Improved disk medium error correction for cases where large numbers of
errors are found.

Enhancements/Tasks
======================
1. Increased performance of random workloads on solid-state drives.
2. Increased performance of small sequential workloads.
3. Unconfigured and hot spare disks can be spun down to conserve power.
4. A virtual disk's capacity can be expanded if there is free space
available on its physical Disks.
5. The controller can be configured to use existing system backplane or storage
enclosure disk slots that have hot spares configured as persistent hot spare
slots. A hot spare disk can then be removed and replaced with replacement
disks without having to configure the new disk as a hot spare. Any disk
inserted on that hot slot will be overwritten and become a hot spare.
6. Enhanced controller error recovery.
7. Non-Dell certified hard drives will no longer be blocked.

Download:

Dell PERC H700 Adapter:
http://ftp.us.dell.com/SAS-RAID/RAID_FRMW_WIN_R269685.EXE

Dell PERC H700 Integrated:
http://ftp.us.dell.com/SAS-RAID/RAID_FRMW_WIN_R269684.EXE
Dell PERC H700 Driver:

Release Date: 7/6/2010
Version: 4.23.0

Fixes and Enhancements:

- Performance improvement with SSDs in random workloads
- Performance increase with small sequential I/Os
- Enhanced error recovery


Windows 2008 32bit driver:
http://ftp.us.dell.com/SAS-RAID/DELL_MULTI-DEVICE_A01_R268782.exe

Windows 2008 64bit driver:
http://ftp.us.dell.com/SAS-RAID/DELL_MULTI-DEVICE_A01_R268783.exe

作者: zhangkui00    时间: 2010-11-17 18:07
不知道是不是旧闻了?已经可以不屏蔽非dell的硬盘了
作者: stonecold    时间: 2010-11-17 18:15
本帖最后由 stonecold 于 2010-11-17 18:15 编辑

很旧的文了。。。。。。。。。。。。。。这个消息后H700就涨价到2000了。。
作者: zhangkui00    时间: 2010-11-18 08:30
呵呵,虽然是旧闻了,被证实了还是让我很欣慰啊




欢迎光临 POPPUR爱换 (https://we.poppur.com/) Powered by Discuz! X3.4