标题: 用promise sata150卡,记得打开硬盘上的缓存. [打印本页] 作者: luqiqing 时间: 2011-1-19 23:22 标题: 用promise sata150卡,记得打开硬盘上的缓存. 二奶机是超级老电脑,那个年代是IDE硬盘,十几年过去了,IDE硬盘已经坏得差不多了.电脑其它还好,但找硬盘是难题.只好找张sata 卡来接新产的sata硬盘,sataII的卡贵过一块主板,找sata150比较便宜.找到张maxtor出的sata卡,其实是promise做的,promise的型号是 SATA150 TX2plus,结果把硬盘跳线成150模式后慢得出奇,读定只有30MB/S.晕,苦苦折磨了数天,在promise网站上找到了说明书,终于发现了要激活硬盘上的cache的.有个文件cache config.exe.上次其它地方下载的驱程没有这个文件,所以慢.promise下载的驱程才有这个文件.请看说明:
A Cache Config utility is included with your SATA150 TX series card. To install Cache Config, copy the Cache Config.exe file to
your desktop, Start menu or other convenient place on your computer (right).
1. To open Cache Config, double-click on the icon. The Cache Config dialog
box opens (below).
2. In the window, click on the SATA150 TX series controller icon. The Turn On/Off Cache option becomes available.
3. Click on Enable to enable the cache or Disable to disable it.This option must be enabled in order for the Disk Drive setting to activate.
4. In the window, click on the Disk Drive icon. The Set Write Through/Back option becomes available (below).
5. Click on Write Through to set the disk drive cache to Write Through or Write Back to set the disk drive cache to Write Back.
6. Repeat steps 4 and 5 for every disk drive attached to your SATA150 TX series controller card.
7. When you are done making cache settings, click the OK button. The utility will offer to restart your system (right).
8. Click Restart now to restart your computer immediately. Click Don’t Restart if you want to postpone the restart until later.
Remember that your changes will not take effect until you restart your
computer.
自己下载那个说明书来看看就明白了.