POPPUR爱换

标题: Kepler 28nm taped out [打印本页]

作者: Edison    时间: 2011-6-29 18:23
标题: Kepler 28nm taped out
Works well

The successor to Nvidia’s Fermi architecture, a certain GPU that goes by the name Kepler has already been taped out.

We have multiple sources to confirm that the new 28nm chip is alive and that it looks quite well. Nvidia didn't have any major obstacles with the first tape out, but naturally there is still a lot of work to seal the leakage, and make the chip generally better. This is nothing unusual for a new chip, and getting from 40nm to 28nm is definitely not a walk in a park.

Kepler naturally gets a lot of changes to Nvidia's GPU and you can imagine that with the same maximal TDP, you can squeeze significantly more transistor and get much more power.

The optimistic projection is to see Kepler in retail in Q4 2011 but some sources suggest that this won't actually happen this year, as TSMC needs a bit more time to make the 28nm more mature.

Current generation GPUs are already hitting the performance wall at 40nm and the industry has a lot riding on the 28nm process, but fear not. For the moment, both AMD and Nvidia seem to be on track and we might see the first 28nm chips by the end of the year, but mass availability comes a bit later.         

http://www.fudzilla.com/graphics/item/23247-kepler-28nm-taped-out

作者: voidshatter    时间: 2011-6-29 18:34
28nm 快点上市吧,40 nm 的剩菜实在是不给力
作者: nom8393    时间: 2011-6-29 18:58
{:5_194:} AMD的新架构不知道是不是kepler的对手。
作者: Edison    时间: 2011-6-29 18:58
Q4 的事情,快不了。
作者: mooncocoon    时间: 2011-6-29 18:59
本帖最后由 mooncocoon 于 2011-6-29 19:03 编辑

某厂第一块。

按进度来看,估计下周或者下下周应该就能开始有R7K的消息了
作者: aibo    时间: 2011-6-29 19:09
不知道nv把kepler的规模设定在多少W

fermi显然是有点大了
作者: gtx5    时间: 2011-6-29 19:09
hd7000还是4D架构
作者: gtx5    时间: 2011-6-29 19:20
本帖最后由 gtx5 于 2011-6-29 19:20 编辑
aibo 发表于 2011-6-29 19:09
不知道nv把kepler的规模设定在多少W

fermi显然是有点大了


1024个cuda核心是必须的{lol:]
作者: westlee    时间: 2011-6-29 19:22
提示: 作者被禁止或删除 内容自动屏蔽
作者: Edison    时间: 2011-6-29 19:22
aibo 发表于 2011-6-29 19:09
不知道nv把kepler的规模设定在多少W

fermi显然是有点大了

kepler 是架构代号,自然有上中下多个具体的型号。

作者: aibo    时间: 2011-6-29 20:08
本帖最后由 aibo 于 2011-6-29 20:09 编辑
Edison 发表于 2011-6-29 19:22
kepler 是架构代号,自然有上中下多个具体的型号。

管理员先森

自然是指旗舰型号啦
我觉得fermi旗舰规模偏大,性能/功耗得甜点可以说在300w~350w了。造成了在风冷下勉强才能达到最佳点。
而按摩店的开曼则有些偏小。性能/功耗的甜点基本上落在150w~200w左右。即便再超频,功耗大幅上涨的同时,性能却上涨的很少了。
作者: potomac    时间: 2011-6-29 20:30
提示: 作者被禁止或删除 内容自动屏蔽
作者: trevorlee    时间: 2011-6-29 20:31
搞。。。。。。。。
作者: G81    时间: 2011-6-29 20:45
但愿开普勒是1536SP 256TMU{hug:]
作者: aimbot    时间: 2011-6-29 21:49
提示: 作者被禁止或删除 内容自动屏蔽
作者: esgehtmirgut    时间: 2011-6-29 21:50
开普勒旗舰显卡什么时候能出
40nm这代太搓了
作者: potomac    时间: 2011-6-29 22:05
提示: 作者被禁止或删除 内容自动屏蔽
作者: 骨刺    时间: 2011-6-29 22:09
1536 1536{lol:]
作者: esgehtmirgut    时间: 2011-6-29 22:30
512SP能到1024SP已经是不可思议了,1536的话,硬件商一步到位就不能骗钱了
作者: airforce18    时间: 2011-6-30 00:25
平均提升60%左右了不得了 。
作者: Edison    时间: 2011-6-30 03:22
第一波 28nm 的性能也就是 GF110 附近,然后是冲 nTFLOPS。
作者: 结果    时间: 2011-6-30 03:31
就是再过5年显卡的性能还是达不到我心中看似不高的要求:人工智能高一些(比如敌人能有效的进行合作)场景广阔一些(以COD6的关卡为准扩大5倍就行),同屏人数多10个,这就行了。
所以还是早点换制程降低点功耗让电源小声一点,机子凉快一点是真的{biggrin:]
作者: 380    时间: 2011-6-30 10:00
提示: 作者被禁止或删除 内容自动屏蔽
作者: DPhil    时间: 2011-6-30 10:04
28nm 希望先出个1000-1500价位上,570级的显卡
作者: R620    时间: 2011-6-30 10:07
Edison 发表于 2011-6-30 03:22
第一波 28nm 的性能也就是 GF110 附近,然后是冲 nTFLOPS。

是指开普勒的性能也和GF110一样?
作者: gz_easy    时间: 2011-6-30 10:53
如果是Q4的话,铺货基本就是明年的事了。
作者: 楼上的老狼    时间: 2011-6-30 11:06
28nm要再次开战了,又有好戏看了
作者: aibo    时间: 2011-6-30 13:03
老黄也怕怕了

主流大小的核心先上扫雷。旗舰级的殿后了
作者: nukualofa    时间: 2011-6-30 16:55
本帖最后由 nukualofa 于 2011-6-30 16:56 编辑

感觉硬件升级和经济走势是相契合的
07-09那几年,显卡性能和规格基本上都是一年一翻,正好是世界经济大热的时候
08年开始金融危机,慢慢就影响到09以后出来的显卡了,基本上开始换汤不换药,08年买的96GSO竟然用到10年底都觉得还不错
作者: CCTV5    时间: 2011-6-30 17:14
新出的游戏还是要向游戏机妥协的
作者: insect2006    时间: 2011-6-30 17:53
PS4肯定要用kepler的显示核心了
作者: PS5    时间: 2012-3-13 15:50
Edison 发表于 2011-6-30 03:22
第一波 28nm 的性能也就是 GF110 附近,然后是冲 nTFLOPS。

算得真准啊~第一波真的比GF110高不到哪去
作者: sunstarmoon    时间: 2012-3-13 15:52
GF110是指GTX 590吗。。。
作者: PS5    时间: 2012-3-13 15:53
sunstarmoon 发表于 2012-3-13 15:52
GF110是指GTX 590吗。。。

GF110=GTX580
作者: GTX999    时间: 2012-3-13 16:22
标题: RE: Kepler 28nm taped out
PS5 发表于 2012-3-13 15:50
算得真准啊~第一波真的比GF110高不到哪去

马屁拍的太明显。哈哈
104的x分都高出gf110 50%了
作者: PS5    时间: 2012-3-13 16:25
GTX999 发表于 2012-3-13 16:22
马屁拍的太明显。哈哈
104的x分都高出gf110 50%了

游戏和跑分是两码事
作者: GTX999    时间: 2012-3-13 16:43
标题: RE: Kepler 28nm taped out
PS5 发表于 2012-3-13 16:25
游戏和跑分是两码事

那就等游戏喽
作者: BDFMK2    时间: 2012-3-13 16:51
9各月过去了
作者: eDRAM    时间: 2012-3-13 17:39
insect2006 发表于 2011-6-30 17:53
PS4肯定要用kepler的显示核心了

如果是2014年才上市就是用Maxwell核心了。
作者: PaulWong    时间: 2012-3-13 17:56
PS5 发表于 2012-3-13 16:25  游戏和跑分是两码事

p2你好,p2mm再见!
作者: xyking    时间: 2012-3-13 19:18
这个都给挖出来了




欢迎光临 POPPUR爱换 (https://we.poppur.com/) Powered by Discuz! X3.4