我们BAE刚刚买了很多 OLED BVM作者: Larrabee2 时间: 2011-9-18 14:59
On Burn-in
Due to the characteristics of the material used in the
OLED panel for its high-precision images, permanent
burn-in may occur if still images are displayed in the same
position on the screen continuously, or repeatedly over
extended periods.
Images that may cause burn-in
• Masked images with aspect ratios other than 16:9
• Color bars or images that remain static for a long time
• Character or message displays that indicate settings or
the operating state
• On-screen displays such as center markers or area
markers
To reduce the risk of burn-in
• Turn off the character and marker displays
Press the MENU button to turn off the character displays.
To turn off the character or marker displays of the
connected equipment, operate the connected equipment
accordingly. For details, refer to the operation manual of
the connected equipment.
• Turn off the power when not in use
Turn off the power if the viewfinder is not to be used for
a prolonged period of time.
Screen saver
This product has a built-in screen saver function to reduce
burn-in. When an almost still image is displayed for more
than 10 minutes, the screen saver starts automatically and
the brightness of the screen decreases.
On a Long Period of Use
Due to an OLED’s panel structure and characteristics of
materials in its design, displaying static images for
extended periods, or using the unit repeatedly in a high
temperature/high humidity environments may cause image
smearing, burn-in, areas of which brightness is
permanently changed, lines, or a decrease in overall
brightness.
In particular, continued display of an image smaller than
the monitor screen, such as in a different aspect ratio, may
shorten the life of the unit.
Avoid displaying a still image for an extended period, or
using the unit repeatedly in a high temperature/high
humidity environment such an airtight room, or around the
outlet of an air conditioner.
To prevent any of the above issues, we recommend
reducing brightness slightly, and to turn off the power
whenever the unit is not in use. 作者: bull 时间: 2011-9-18 16:22
哪怕是LMD级别25寸FULLHD规格的OLED也起码是15KRMB+的价格了。
这么个价格 这么个效果。
大家还舍得用来上网和QQ聊天?
肯定是另外找个文本效果好的TN来做这些事情了。
这OLED肯定平时是全黑显示,就看视频和打游戏什么的动用一下。作者: jali_0 时间: 2011-9-18 17:10
索尼的OLED监视器都是用的super top emission这个技术 也就是顶部发光技术 并且有你说的这种加了滤片的技术。
索尼采用的这个技术 http://www.oled-display.net/sony-super-top-emission-oled-technology-explained/ 这边有介绍 其中这一段就就讲了到了他使用的这个技术的一个向我们展示了一下他比别人的底部发光技术好的一个地方。
Micro-cavities enhance color purity
Like CRT phosphors, the chemistry of OLED emission layers naturally produces Red, Green and Blue light. But Sony goes even further. Red, Green and Blue each have different wavelengths. Sony provides each color with a different emission layer thickness, corresponding to the desired wavelength. These layers, called “micro-cavities” enable light to resonate inside, generating Red, Green and Blue light of substantially higher intensity and purity. In addition, RGB color filters reduce ambient light reflection and further enhance color purity.
意思大概是OLED这个发光层发出RGB三种光。因为RGB三种颜色的光波长不同,索尼就通过调整发光层的厚度,来获得想要的波长的光。他们把每个这种发光层称为称为micro-cavity。光可以在这些微腔中震动使得色域更广纯度更高。而且,RGB滤色片减少了周围的光反射从而进一步的提高了颜色的纯度。
其实光看技术文档 我觉得也没什么,还是要看实际效果。三星的OLED可能是买的别人的技术,自己没那能力调教,或者此类技术本身就是别人淘汰的,因为不符合出售技术公司的要求。具体也不想去考证了,super amoled plus除了黑场 其他的真没给我有什么好的印象。 作者: OnlySS 时间: 2011-9-19 21:13
接楼上,忘记说了,索尼的这个是用来净化色彩的,不是转色的,面板还是RGB 10bit面板 加了滤片增加色彩的纯净度。作者: cocklao 时间: 2011-9-20 21:07 标题: , 本帖最后由 cocklao 于 2011-9-20 21:10 编辑