POPPUR爱换

标题: LSI SAS/RAID HBA的一些KB收集...!! [打印本页]

作者: per1-q1222 时间: 2011-11-18 22:23
标题: LSI SAS/RAID HBA的一些KB收集...!!
關於LSI SAS/RAID HBA相關KB列表如下, 我個人覺得值得參考的相關議題:
16578, INT13 Limitation/Devices Not Detected in Operating System
16531, Locate and identify drives in an enclosure or backplane with Activity LEDs
16465, Motherboards with UEFI boot enabled
16396, MegaRAID Load Balancing Command for MegaCLI
16112, Unable to complete POST with multiple 6Gb/s SAS HBAs in a host
16576, LSI MegaRAID SafeStore support for SAS and SATA drives
16230, Are 'Advanced Sector' 4K sector drives supported by LSI?
16385, What are the MegaCLI command line options for the Dimmer Switch™ feature?
16590, What are the types of MegaRAID Dimmer Switch power savings settings, and should I use any of them?
16481, 3 TeraByte (3TB) capacity drives on LSI MegaRAID and 3ware controllers
16570, MegaRAID Feature: Maintain PD Fail History
16572, Running consistency check with MegaRAID controllers
16511, MegaRAID, 3ware, and HBA Support for Various RAID Levels and JBOD Mode
16539, Migrating array volumes from older to newer MegaRAID controllers
16538, Using 6 Gb/sec drives in 3 Gb/sec backplane
16594, Use of MegaRAID CacheCade Pro 2.0 Firmware with CacheCade (non-Pro 2.0) Hardware Key
16491, MegaCLI Command to Migrate Drives Into an Existing Volume or Migrate RAID Level
16368, Why has the Adaptive Read Ahead option been removed for MegaRAID controllers?
16366, How to clear configuration from a single drive which has been removed from a still-active volume...
16038, Enclosure services configuration for the LSI 9260 with the Supermicro 826TQ, 836TQ or 846TQ.
15923, IRQ conflict with another device in Windows Server 2003/Windows XP
15815, Multidrive failure recovery with MegaRAID
15814, Configuration Loss - Configuration Recreation
15809, Information on media errors with MegaRAID controllers
15808, Hardware failover support for MegaRAID products (MPIO, RDAC)
16593, How to make a USB flash drive bootable with the DOS
16399, Using drives >2TB in capacity with LSI SAS HBAs
16478, MegaRAID or SAS controller 'Unconfigured foreign'/'Unconfigured bad'
16084, MegaRAID Storage Manager Silent Installation
16061, Unable to boot to JBOD drive with an LSI IR HBA
15807, Flashing an LSI SAS HBA on an Intel 3000/5000 based board gives "Failed to initialize PAL"
16187, Sector alignment needs with MegaRAID controllers
16562, Is TRIM supported with LSI RAID controllers or SAS HBAs?

作者: qqsxbg 时间: 2011-11-20 17:17
好文先看再说

作者: anti_alive 时间: 2011-11-21 01:08
全了，谢谢楼主的资料

欢迎光临 POPPUR爱换 (https://we.poppur.com/)

Powered by Discuz! X3.4