POPPUR爱换

标题: 江湖救急之二（LSI的9265-8i） [打印本页]

作者: luomax 时间: 2011-11-26 17:16
标题: 江湖救急之二（LSI的9265-8i）
原贴http://we.pcinlife.com/thread-1785882-1-1.html
淘宝上弄了块9265-8i，好像是原来的卡有问题，Ctrl+H后出现

作者: luomax 时间: 2011-11-26 17:17
难道连RAID5都不支持？

作者: luomax 时间: 2011-11-26 17:18
LSI的高级软件功能，在哪开通？或在哪购买？大概费用是多少？

作者: per1-q1222 时间: 2011-11-26 17:19
本帖最后由 per1-q1222 于 2011-11-26 17:20 编辑

難道是我會錯意??..
還是LZ的英文有問題..

Unlimited代表沒有任何限制..
對於RAID 5/6來說也算是隱含性的高階軟件服務(此項設計是用來針對OEM產品客製化而定, 對LSI自家產品來說, 沒有甚麼意義)..
他的Unlimited代表開放RAID 5/6的軟體授權..
也就是允許使用RAID 5/6..

作者: per1-q1222 时间: 2011-11-26 17:21
本帖最后由 per1-q1222 于 2011-11-26 17:22 编辑

luomax 发表于 2011-11-26 17:18
LSI的高级软件功能，在哪开通？或在哪购买？大概费用是多少？

如果國內代理商不肯代理這些產品..
請至:
store.lsi.com

我的建議是你對好跟LSI詢問電子認證的部分..
而不要購買硬件key..

作者: jimmyjin 时间: 2011-11-26 17:33
别Ctrl+H 了，进OS了再configRAID 好了，难道你OS都做在RAID上？

作者: luomax 时间: 2011-11-26 17:46
只是Ctrl+H里面设置些什么不明白

作者: per1-q1222 时间: 2011-11-26 17:46

luomax 发表于 2011-11-26 17:46
只是Ctrl+H里面设置些什么不明白

不明白你可以提出問題..!

作者: luomax 时间: 2011-11-26 17:54

per1-q1222 发表于 2011-11-26 17:19
難道是我會錯意??..
還是LZ的英文有問題..
Unlimited代表沒有任何限制..

英文水平是有点差

我想做6块盘的RAID5，需要在wibbios里面设置些什么呢？

作者: per1-q1222 时间: 2011-11-26 17:55
本帖最后由 per1-q1222 于 2011-11-26 17:56 编辑

luomax 发表于 2011-11-26 17:54
英文水平是有点差
我想做6块盘的RAID5，需要在wibbios里面设置些什么呢？

視你的整體架構而定....
你是用甚麼機箱?..
9265-8i的BIOS內容跟9260-8i有很多差異(控制器屬性部分(Controller Properties))..
你最好貼張照片..
因為我手邊目前沒有這張...

作者: luomax 时间: 2011-11-26 18:00

per1-q1222 发表于 2011-11-26 17:55
視你的整體架構而定....
你是用甚麼機箱?..
9265-8i的BIOS內容跟9260-8i有很多差異(控制器屬性部分(Con ...

超微的747
http://www.supermicro.com.tw/products/chassis/4U/747/SC747TG-R1400-SQ.cfm

作者: luomax 时间: 2011-11-26 18:01
SAS盘发热有点厉害，准备弄个MD1200

作者: idolclub 时间: 2011-11-26 18:44

luomax 发表于 2011-11-26 18:01
SAS盘发热有点厉害，准备弄个MD1200

15K SAS盤在沒有風扇輔助散熱下很容易就會超過50度

作者: luomax 时间: 2011-11-26 18:46

idolclub 发表于 2011-11-26 18:44
15K SAS盤在沒有風扇輔助散熱下很容易就會超過50度

超微机箱几块盘叠加在一起，只有风扇抽风，不烂才怪，新订的9265-8i到了，不知道能不能带MD1200

作者: luomax 时间: 2011-11-26 20:12
4块1.5万转的盘RAID5，正常？

作者: per1-q1222 时间: 2011-11-26 20:33

luomax 发表于 2011-11-26 20:12
4块1.5万转的盘RAID5，正常？

你的設定不正確

作者: luomax 时间: 2011-11-26 20:39

per1-q1222 发表于 2011-11-26 20:33
你的設定不正確

怎么设定呢

作者: 五湖废人 时间: 2011-11-26 21:10

idolclub 发表于 2011-11-26 18:44
15K SAS盤在沒有風扇輔助散熱下很容易就會超過50度

50度算个啥啊- -想当初我扇子坏了- -晚上回家整个房间都是尖锐的报警,一看,我靠,6X度

作者: 五湖废人 时间: 2011-11-26 21:11

luomax 发表于 2011-11-26 18:46
超微机箱几块盘叠加在一起，只有风扇抽风，不烂才怪，新订的9265-8i到了，不知道能不能带MD1200

回复过你的PM了，9265-8i是内置卡，你带MD1200需要9280-8e

作者: luomax 时间: 2011-11-26 21:14

五湖废人发表于 2011-11-26 21:11
回复过你的PM了，9265-8i是内置卡，你带MD1200需要9280-8e

谢谢，内置转成外置的不行？

作者: per1-q1222 时间: 2011-11-26 21:22

luomax 发表于 2011-11-26 20:39
怎么设定呢

你先上TTY log...
我直接看TTY log..

作者: per1-q1222 时间: 2011-11-26 21:22

五湖废人发表于 2011-11-26 21:10
50度算个啥啊- -想当初我扇子坏了- -晚上回家整个房间都是尖锐的报警,一看,我靠,6X度

我這邊一天到晚都是5x度...

作者: luomax 时间: 2011-11-26 21:36

per1-q1222 发表于 2011-11-26 21:22
你先上TTY log...
我直接看TTY log..

TTY log是什么

作者: 五湖废人 时间: 2011-11-26 21:41

luomax 发表于 2011-11-26 21:14
谢谢，内置转成外置的不行？

......何必呢,何苦呢,买个H800 1GNVC才不到2000- -

作者: per1-q1222 时间: 2011-11-26 21:43
本帖最后由 per1-q1222 于 2011-11-26 21:44 编辑

luomax 发表于 2011-11-26 21:36
TTY log是什么

TTY log是LSI針對MegaRAID產品提供的高級log
屬於H/W層級的log....
可以觀看更細部的數據..
也就是說他這些數據是從所謂的NVRAM上那些persistent層級的區域取出..
詳情請見我寫的這篇:
http://www.osslab.com.tw/Storage ... %B42011/TTY_Logging

作者: per1-q1222 时间: 2011-11-26 21:45
本帖最后由 per1-q1222 于 2011-11-26 21:46 编辑

五湖废人发表于 2011-11-26 21:41
......何必呢,何苦呢,买个H800 1GNVC才不到2000- -

性能和功能性有極大差異阿..

9265/9285有眾多高級功能...
這些功能..
LSISAS2108一個都沒有..
我問過LSI有沒有希望讓LSISAS2108支援...
目前情況是==>>impossible..!!

作者: 五湖废人 时间: 2011-11-26 21:55
可是可是- -我不认为他会用到这些“其他”功能- -bbb

作者: idolclub 时间: 2011-11-26 22:12

luomax 发表于 2011-11-26 20:39
怎么设定呢

先把HD TUNE內的Block Size改為8MB大小再測

作者: idolclub 时间: 2011-11-26 22:14

五湖废人发表于 2011-11-26 21:10
50度算个啥啊- -想当初我扇子坏了- -晚上回家整个房间都是尖锐的报警,一看,我靠,6X度

冬天和夏天的分別

作者: luomax 时间: 2011-11-27 00:42
折腾了半天，好像对了，麻烦大家看看，谢谢

作者: luomax 时间: 2011-11-27 00:42
第三张选项对么？

作者: luomax 时间: 2011-11-27 00:56

per1-q1222 发表于 2011-11-26 21:45
性能和功能性有極大差異阿..[blink>
9265/9285有眾多高級功能...
這些功能..

折腾了半天，好像对了，麻烦看看

作者: dracocephalum 时间: 2011-11-27 05:22

luomax 发表于 2011-11-26 22:00
超微的747
http://www.supermicro.com.tw/products/chassis/4U/747/SC747TG-R1400-SQ.cfm

這款機箱我也在用，3.5吋的15k硬盤除非你把風扇開到50% workload以上，否則會杯具的~

2.5吋15k通過轉接架放在下面的8個槃位就好一點~因爲距離大了~

注意裏面的三洋風扇也有兩種，一種是15G，一種是18G，18G的那種在0% workload時才1000rpm，15k要調到60% workload 了……

還有，SQ只有兩把風扇，這是形成不了風道的，我還得自己聯係超微的rma買了兩個湊夠4個~

作者: luomax 时间: 2011-11-27 06:19

dracocephalum 发表于 2011-11-27 05:22
這款機箱我也在用，3.5吋的15k硬盤除非你把風扇開到50% workload以上，否則會杯具的~

2.5吋15k通過轉接 ...

风扇好像是5K转的，不敢上8块盘，两块叠在一起，中间空了2个槽，所以共6块盘，就这样都怕，想上MD1200的盘柜了

作者: 五湖废人 时间: 2011-11-27 07:24
自家没有机房还是别考虑1220了
你可以想象一下你在厨房开着脱排油烟机...

作者: per1-q1222 时间: 2011-11-27 07:34

luomax 发表于 2011-11-27 00:56
折腾了半天，好像对了，麻烦看看

這種設定會對寫入性能造成重大傷害...
前面說了..
你還是老實上TTY log..

作者: stephenmaxmax 时间: 2011-11-27 14:44
其实我觉得木有必要开read ahead，条带比较大的话，cache空间可能会被浪费很多。
而操作系统一般会自己去做read ahead。
我现在全都木有开，不过当然只是我个人想法。

作者: luomax 时间: 2011-11-27 18:27

五湖废人发表于 2011-11-27 07:24
自家没有机房还是别考虑1220了
你可以想象一下你在厨房开着脱排油烟机...

哈哈，就是，超微747还静音版的，那个噪音哦。。。

作者: luomax 时间: 2011-11-27 18:28

per1-q1222 发表于 2011-11-27 07:34
這種設定會對寫入性能造成重大傷害...
前面說了..
你還是老實上TTY log..

看不懂啊，您老就直接说怎么调嘛

作者: per1-q1222 时间: 2011-11-27 18:32

luomax 发表于 2011-11-27 18:28
看不懂啊，您老就直接说怎么调嘛[sweatingbullets>

[attach]1699223[/attach]

我不太清楚你的環境..
按照這個步驟存成log..
上傳上來即可...

作者: luomax 时间: 2011-11-27 20:07
11/27/11 20:00:40; (43264 seconds since power on)

Online History
=================================

T0: TtyInit: FlashLog @ 0xfc480000 Size = 0x200000
T0: TtyInit: FlashTty @ 0xfc680000  Size = 0x100000

T0: LSI ROC firmware
T0: Copyright(C) LSI Corporation, 2010
T0: Firmware version 3.140.15-1320 built on Jul 15 2011 at 15:21:13

T0: supported dgbflags:
T0:    geminiDbg: 0
T0:    biosDisable: 0
T0:  *** HW Encryption Disabled : dcrReg=b5000051
T0: L2 init found 0 errors in L2
T0: L2 init as L2
T0: PCIE Link Status/Ctrl 10820001 Speeds: max=5.0 Gb/s neg=5.0 Gb/s, Widths: max=8 neg=8
T0: DRAM_LOCAL_BASE: 80000000
T0: MEM_FIXED_SIZE: 1400000
T0: MEM_FIXED_END: 81400000
T0: FW_DRAM_REGION_START: 81400000
T0: FW_DRAM_REGION_SIZE: 4c00000
T0: MEM_POOL_BASE: 84c794d4
T0: Initializing memory pool size=01386B2C bytes
T0: TxRwPtrs: 00000000 RxRWPtrs: 00000000 TxBase c0254000 RxBase c0254080
T0: TxRwPtrs: 00000000 RxRWPtrs: 00000000 TxBase c0254100 RxBase c0289d00
T0: TxRwPtrs: 00000000 RxRWPtrs: 00000000 TxBase c029f500 RxBase c02a1500
T0: TxRwPtrs: 00000000 RxRWPtrs: 00000000 TxBase c02a3500 RxBase c02a5500
T0: CCR_RST_STATUS 7f0
T0: doing SYSTEM RESET 1
T0: MonSetAllowChipReset: MonAllowResetChip 1
T0: Press '!' within 3 seconds to enter debugger before INIT
T3: I2C 0 reset!
T3: I2Chandle obtained for MUX [0]0x0
T3: I2C 1 reset!
T3: I2Chandle obtained for MUX [1]0x10
T3: I2C 5 reset!
T3: I2Chandle obtained for MUX [5]0x50
T3: SBR: I2Chandle obtained for SBR 51
T3: SBR HW Primary(0000):
T3: One Wire Device detected f100000004767e4f
T3: EepromInit: Family=4f, SN=7e7604000000
T3: One Wire Device detected f100000004767e4f
T3: One Wire Device detected f100000004767e4f
T3: One Wire Device detected f100000004767e4f
T3: FlashFind: Searching for APP  :Found @:0xc1800000(App:0x0)
T3: Authenticating RAID key: One Wire Device detected f100000004767e4f
T4: One Wire Device detected f100000004767e4f
T4: Done!
T4: CFGI firmware version 6.0.0.2
T4: FlashFind: Searching for NVDT :Found @:0xfcf00000(App:0x0)
T4: Nvdata version 2.1106.03-0051 built on Jul 11 2011 at 18:31:06

T4: Dm_Cfg_InitConfigPages: Compressed NVDATA image being used; compImgAddr = fef00128
T4: LOAD section: src=fef00128, size=162a, dst=0, mode=1...InflateNvdata: pDestStart = 85f8d7a0, buf = 85ff57c0, len = =8000
T4: InflateNvdata: pDestStart = 85f957a0, buf = 85ff57c0, len = =8000
T4: InflateNvdata: pDestStart = 85f9d7a0, buf = 85ff57c0, len = =8000
T4: InflateNvdata: pDestStart = 85fa57a0, buf = 85ff57c0, len = =8000
T4: InflateNvdata: pDestStart = 85fad7a0, buf = 85ff57c0, len = =8000
T4: InflateNvdata: pDestStart = 85fb57a0, buf = 85ff57c0, len = =4d74
T4: done
T4: DM_Cfg_InitConfigPages: NVDATA page matched(image 1)
T4: **********************************************************************
T4: iopiSODAlloc: size = 1e0, MemType = 1
T4: **********************************************************************
T4: iopiSODAlloc: size = 1730, MemType = 3
T4: Config Pages initialization completed. Persistent Nvdata version = 33047
T4: pageAddr 05ffc260 pageType 09 pageNum 01 pageSize 0041
T4: pageAddr 05ffc364 pageType 09 pageNum 02 pageSize 003a
T4: pageAddr 05ffc44c pageType 09 pageNum 03 pageSize 006b
T4: pageAddr 05ffc5f8 pageType 09 pageNum 05 pageSize 0044
T4: pageAddr 05ffc708 pageType 09 pageNum 06 pageSize 007e
T4: pageAddr 05ffc900 pageType 09 pageNum 07 pageSize 0079
T4: pageAddr 05ffcae4 pageType 09 pageNum 08 pageSize 0057
T4: pageAddr 05ffcc40 pageType 09 pageNum 09 pageSize 0039
T4: pageAddr 05ffcd24 pageType 09 pageNum 0b pageSize 0012
T4: pageAddr 05ffcd6c pageType 09 pageNum 0c pageSize 0037
T4: pageAddr 05ffce48 pageType 09 pageNum 0d pageSize 0033
T4: pageAddr 05ffcf14 pageType 09 pageNum 0e pageSize 0033
T4: pageAddr 05ffcfe0 pageType 09 pageNum 0f pageSize 0031
T4: pageAddr 05ffd0a4 pageType 09 pageNum 11 pageSize 000c
T4: pageAddr 05ffd0d4 pageType 00 pageNum 01 pageSize 0002
T4: pageAddr 05ffd0dc pageType 01 pageNum 01 pageSize 0006
T4: pageAddr 05ffd0f4 pageType 01 pageNum 08 pageSize 0006
T4: pageAddr 05ffd10c pageType 10 pageNum 01 pageSize 0035
T4: pageAddr 05ffd1e0 pageType 10 pageNum 04 pageSize 000f
T4: pageAddr 05ffd21c pageType 10 pageNum 05 pageSize 0034
T4: pageAddr 05ffd2ec pageType 13 pageNum 03 pageSize 0014
T4: pageAddr 05ffd33c pageType f0 pageNum 00 pageSize 002d
T4: pageAddr 05ffd3f0 pageType f1 pageNum 00 pageSize 0040
T4: pageAddr 05ffd4f0 pageType f0 pageNum 01 pageSize 0020
T4: MPTFW-07.26.05.00-IT
T4: MPT FW buildTime: 5/23/2011 13:14:59
T4: geminiInit pDesc: c0000050 addr 0000000001300000 size 00100000 flags 0000202a
T4: geminiInit pDesc: c0000060 addr 0000000000900000 size 00800000 flags 00002000
T4: geminiInit pDesc: c0000070 addr 00000000c0000000 size 00200000 flags 00001100
T4: geminiInit pDesc: c0000080 addr 00000000c0200000 size 00100000 flags 00001101
T4: gemini init! request c0000000 reply 05ffbba0
T4: GeminiParseReply pReply:85ffbba0 count a
T4: geminiInit pDesc: 85ffbc20 addr 00000000c00af600 size 00040000 flags 00001114
T4: geminiInit pDesc: 85ffbc30 addr 00000000c00ef600 size 00013600 flags 00000016
T4: geminiInit pDesc: 85ffbc40 addr 00000000c0102c00 size 00080000 flags 00000015
T4: geminiInit pDesc: 85ffbc60 addr 0000000000d3dd40 size 000d3700 flags 00000019
T4: geminiInit pDesc: 85ffbc50 addr 00000000009f0140 size 0034dc00 flags 00000017
T4: geminiInit pDesc: 85ffbbf0 addr 00000000c01b80a8 size 00047f58 flags 00001100
T4: geminiInit pDesc: 85ffbc80 addr 00000000c00293c0 size 00013d28 flags 0000001a
T4: poolType:0 startingLmid:537 Ba: c1102c00 count:800
T4: poolType:1 startingLmid:1 Ba: c10af600 count:400
T4: poolType:2 startingLmid:401 Ba: c10ef600 count:136
T4: Gemini Initialization Complete!!
T4: DM_InitializeFramePools ba:c10af500, countHostLmids:400, countResourceLmids:136, countMegaraidLmids:800
T4: MPT_MISMInit gc:800 frameSz:100
T4: MemSRAMAvailableSize :54a20

T4: DM_AllocateSGResources: SG Start address in SRAM is : xc02a75e0 maxRequestFrames:800 numSgInSgFrame: 10 numSgInIoFrame:8
T4: availableSRAM_Mem :54a20
T4:    DM_PL_AllocReqFrames: Max SGL frames in SRAM: 54a
T4:    From SRAM: SgInIo Frame xa SgInSg Frame x15 TotSg Frames x54a Frame Size x100 sgBaseAddr xc12a75e0
T4:    Total memory allocated for SGL Frames in SRAM is : x54a00
T4:    Allocating left over x1ab6 SGL frames in DDR at address : x85e4fc20
T4:    From DDR: SgInIo Frame xa SgInSg Frame x15 TotSg Frames x1ab6 Frame Size x100 sgBaseAddr x85e4fc20
T4: size of MFC Defaults structure in Bytes = 72
T4: EVT#04324-T4: 0=Firmware initialization started (PCI ID 005b/1000/9265/1000)
T4: EVT#04325-T4: 1=Firmware version 3.140.15-1320
T4: Initializing the Temperature Monitor
T4: I2C 4 reset!
T4: I2Chandle obtained for MUX [4]0x40
T4: DRAM SIZE=1024 MB
T4: Init flash timings : FlashTimeNs 78  NvsTimeNs 32
T4: phy intIndex extIndex
T4:  00 00    ff
T4:  01 00    ff
T4:  02 00    ff
T4:  03 00    ff
T4:  04 01    ff
T4:  05 01    ff
T4:  06 01    ff
T4:  07 01    ff

T4: Environment data:
T4: VERSIONS=APP_3.140.15-1320,APP_3.140.14-1320,BIOS_5.25.00_4.11.05.00_0x05040000,HIIM_01.10.00,PCLI_05.01-04:#%00001,BCON_6.1-20-e_20-Rel,NVDT_2.1106.03-0051,NVDT_2.1106.04-0050,BTBL_2.04.00.00-0001,BOOT_06.253.57.219
T4: PACKAGE=23.1.1-0004
T4: VALIDATION=GCA_07/15/11_17:29:13

T4: MFC data:
T4:    vendorId/deviceId=1000/005b, subVendorId/subDeviceId=1000/9265, OEM=1, SubOem=0, isRaidKeySecondary=0
T4:    MFCF: clusterDisable=1, disableSAS=0, maxDisks=0, enableRaid6=1, disableWideCache=0
T4:    disableRaid5=0, enableSecurity=0, enableReducedFeatureSet=0
T4:    enableCTIO=0 enableSnapshot=0 enableSSC=0
T4:    MFCD: sasAddr=500605b0039484d0, phyPolarity=00 phyPolaritySplit 00
T4:    backgroundRate=30, stripeSize=7(64K), flushTime=4
T4:    writeBack=1, readAhead=2, cacheWhenBBUBad=0, cachedIo=0
T4:    smartMode=0(6), alarmDisable=0, coercion=0(None), zcrConfig=0(Undefined)
T4:    dirtyLedShowsDriveActivity=0, biosContinueOnError=0, spindownMode=0(None)
T4:    allowedDeviceTypes=0(SAS/SATA), allowMixInEnclosure=1, allowMixInLD=1, allowSataInCluster=0
T4:    allowSSDMixInLD=0, allowMixSSDHDDInLD=0
T4:    maxChainedEnclosures=16, disableCtrlR=1, enableWebBios=1, directPdMapping=0, biosEnumerateLds=1
T4:    restoreHotSpareOnInsertion=0, exposeEnclosureDevices=1
T4:    maintainPdFailHistory=1 disablePuncturing=0 zeroBasedEnclEnumeration=0 disableBootCLI=0
T4:    quadPortConnectorMap=0 driveActivityLed=1 disableAutoDetectBackplane=0
T4:    enableLedHeaders=0 useFdeOnly=0 delayPOST=0 enableCrashDump=0 enableLDBBM=0
T4:    allowUnCertifiedHDDs=1 treatR1EAsR10=0, maxLdsPerArray=0, disableOnlineCtrlReset=0
T4:    failPdOnSMARTer=0 nonRevertibleSpares=0,
T4:    snapVDSpace=3, autoSnapVDSpace=8, viewSpace=4
T4:  disablePowerSavings=14 spinDownTime=1e
T4:    enableJBOD=0  ttyLogInFlash=0
T4:    breakMirrorRAIDSupport=0, disableJoinMirror=0
T4:    enableEmergencySpare=1 useGlobalSparesForEmergency=1 useUnconfGoodForEmergency=1
T4:    enableShieldState=1
T4:    enableDriveWCEforRebuild=1
T4:    blockSSDWriteCacheChange=1 detectCMETimer:3c
T4: MFC MFG data:
T4:    date=07/15/11, sn="SV12909018", reworkDate=00/00/00, rev="01A"

T4: can_flush = 0
T4: initFreeDDBs=xorPool 84c55600-84c67600 genPool 84c1d600-84c35600 runTime 0 numXorDdb 80 numCipherDdb =400
T4: initBladeSGL 84c35600-84c55600 runTime 0 numSglFrame 400

T5: Controller Properties: (All values are in hex)
T5: seqNum=5, predFailPollInterval=12c, intThrottleCount=10
T5: intThrottleTimeUs=32, rebuildRate=1e, patrolReadRate=1e
T5: bgiRate=1e, ccRate=1e, reconRate=1e
T5: cacheFlushInterval=4, spinupDriveCount=2, spinupDelay=c
T5: clusterEnable=0, coercionMode=0, alarmEnable=0
T5: disableAutoRebuild=0, disableBatteryWarning=1, eccBucketSize=f
T5: eccBucketLeakRate=5a0, restoreHotSpareOnInsertion=0
T5: exposeEnclosureDevices=1, maintainPdFailHistory=1
T5: disallowHostRequestReordering=0
T5: abortCCOnError=0, copyBackDisabled=0, SMARTerEnabled=0
T5: prCorrectUnconfiguredAreas=1, useFdeOnly=0
T5: disableNCQ=0, SSDSMARTerEnabled=1, SSDPatrolReadEnabled=0
T5: enableSpinDownUnconfigured=1, disableSpinDownHS=0, spinDownTime=1e
T5: autoEnhancedImport=0, enableSecretKeyControl=0, disableOnlineCtrlReset=0
T5: enableJBOD=0
T5: allowBootWithPinnedCache=0
T5: LoadBalanceEnabled=1, useDiskActivityForLocate=0

T5: useGlobalSparesForEmergency=1, useUnconfGoodForEmergency=1, useEmergencyForSMARTer=0
T5: OnOffProperties=c130ae38
T5: autoSnapVDSpace=8, viewSpace=4, snapVDSpace=3
T5: defaultPSPolicy=fe autoPSPolicySupported=0
T5: maxPSPolicySupported=0 cachedWritesSupported=0
T5: disablePSTime=0 disablPSInterval=0
T5: spinupEnclDriveCount=4 spinupEnclDelay=6
T5: perfTunerMode=0 "Best IOPs"
T5: Best IOPs: mf=0, maxLatencyMs=0, LL: mf=4, maxLatencyMs=e
T5: I2Chandle obtained for Ni-MH based BBU Charger 11
T5: I2Chandle obtained for Gas Guage 12
T5: I2Chandle obtained for Li-Ion based BBU Charger 13
T5: I2Chandle obtained for Li-Ion based BBU I2C Buffer 14
T5: I2Chandle obtained for impedance Tracking gas guage in iBBU09 15
T5: I2Chandle obtained for GPIO expander in iBBU09 16
T5: I2Chandle obtained for EEprom in expander in iBBU09 17
T5: ibbuInit: battery is not present
T5: PdInit: PD_INFO entries are 0x2a0 bytes
T5: powerSaveInit: Init structures
T5: EVT#04326-T5: 261=Package version 23.1.1-0004
T5: EVT#04327-T5: 266=Board Revision 01A
T5: ready_list=86000000 (100000 elements)
T5: rebuild_list=86800000 (10000 elements)
T5: lines_info=86880000 (12a400 elements)
T5: DISK_CACHE_VIRT_ADDR_START=8800d000
T5: DISK_CACHE_VIRT_ADDR_END=90000000
T5: DISK_CACHE_LINEAR_ADDR_START=800d000
T5: DISK_CACHE_LINEAR_ADDR_END=3ffffe00
T5: Host: FreeHead=1 FreeTail=400
T5: Raid: FreeHead=401 FreeTail=23ff
T5: KM_KeyMgmtInitTRNG: security is not enabled
T5:  Device Module Version 1.1 Date Jul 15 2011 Time 15:20:34
T5: DM_ChipInit: Total chips=1
T5: LSI_InitMPT: Total chips=x01
T5: Chip=00 vendorId 1000 deviceId 005b Revision 01
T5: CISM: CHIP_STATE_START - chipIdx x00
T5: Get IOC FACTS message chipIdx x00
T5: MPT_IOCFacts: ioc facts address = xc02a7544
T5: Get PORT FACTS message chipIdx x00
T5: CISM: CHIP_STATE_MPT_OPERATIONAL chipIdx x00
T5: MPT_IoUnitPageSet: pIoUnit = c130ae18 size 8 sIoUnit2.Flags:40 bitMapToSet:2000 bitMapToClear:1000
T5: MPT_IoUnitPageSet: Setting ioUnitflag value to 2040
T5: MPT_IoUnitPageSet: Successfully updated on chip: 0
T5: MPT_SASConfIoc: Current Addr in Man Page 5:
T5: Phy:0 SAS Addr 500605b0:39484d0 - Device Name 0:0
T5: Phy:1 SAS Addr 500605b0:39484d1 - Device Name 0:0
T5: Phy:2 SAS Addr 500605b0:39484d2 - Device Name 0:0
T5: Phy:3 SAS Addr 500605b0:39484d3 - Device Name 0:0
T5: Phy:4 SAS Addr 500605b0:39484d4 - Device Name 0:0
T5: Phy:5 SAS Addr 500605b0:39484d5 - Device Name 0:0
T5: Phy:6 SAS Addr 500605b0:39484d6 - Device Name 0:0
T5: Phy:7 SAS Addr 500605b0:39484d7 - Device Name 0:0
T5: New SAS Addr x500605b0039484d0
T5: MPT_SetEventNotification: Sent EventNotification request chipIdx:0 msgNum:554
T5: PortEnable started for chip x00 - StartTime x00000005
T5: MPT_Event: EVENT_EVENT_CHANGE

T7: iopiEvent: EVENT_SAS_DISCOVERY
T7: DM_HandleDiscEvent: Discovery started on Port 0

T7: MPT_Event: EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE
T7: iopiEvent: EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE
T7: DM_HndlEnclStatusChgEvnt: EnclosureHandle x0001 Reason x01 PhysicalPort 0
T7: ELI 500605b039484d0 NumSlots x0008 StartSlot x0000 PhyBits x00000000 IOCLogInfo x00000000 IOCStatus x0000
T7: Ctrl enclosure device added
T7: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=0
T7: MPT_DeviceAddRemove : ADDED - phy x00 devHandle x0009 parentDevHdl x0001 phyNum x00 slot x03 deviceInfo=x00000c01 sasAddr=5000c500:4347babd
T7: DM_DeviceInserted: tempdevId[110], DevHandle[9]

T7: iopiEvent: EVENT_SAS_DISCOVERY
T7: DM_HandleDiscEvent: Discovery started on Port 1
T7: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=1
T7: MPT_DeviceAddRemove : ADDED - phy x01 devHandle x000a parentDevHdl x0002 phyNum x01 slot x02 deviceInfo=x00000c01 sasAddr=5000c500:1c802879
T7: DM_DeviceInserted: tempdevId[111], DevHandle[a]

T7: iopiEvent: EVENT_SAS_DISCOVERY
T7: DM_HandleDiscEvent: Discovery Completed on Port 1

T7: iopiEvent: EVENT_SAS_DISCOVERY
T7: DM_HandleDiscEvent: Discovery started on Port 2
T7: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=2
T7: MPT_DeviceAddRemove : ADDED - phy x02 devHandle x000b parentDevHdl x0003 phyNum x02 slot x01 deviceInfo=x00000c01 sasAddr=5000c500:1c820e89
T7: DM_DeviceInserted: tempdevId[112], DevHandle[b]

T7: iopiEvent: EVENT_SAS_DISCOVERY
T7: DM_HandleDiscEvent: Discovery Completed on Port 2

T7: iopiEvent: EVENT_SAS_DISCOVERY
T7: DM_HandleDiscEvent: Discovery started on Port 3
T7: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=3
T7: MPT_DeviceAddRemove : ADDED - phy x03 devHandle x000c parentDevHdl x0004 phyNum x03 slot x00 deviceInfo=x00000c01 sasAddr=5000c500:1c81a629
T7: DM_DeviceInserted: tempdevId[113], DevHandle[c]

T7: iopiEvent: EVENT_SAS_DISCOVERY
T7: DM_HandleDiscEvent: Discovery Completed on Port 3

T7: iopiEvent: EVENT_SAS_DISCOVERY
T7: DM_HandleDiscEvent: Discovery started on Port 4
T7: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=6
T7: MPT_DeviceAddRemove : ADDED - phy x06 devHandle x000d parentDevHdl x0005 phyNum x06 slot x05 deviceInfo=x00000c01 sasAddr=5000c500:1c825e75
T7: DM_DeviceInserted: tempdevId[114], DevHandle[d]

T7: iopiEvent: EVENT_SAS_DISCOVERY
T7: DM_HandleDiscEvent: Discovery Completed on Port 4

T7: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=2 StartPhyNum=4

T7: iopiEvent: EVENT_SAS_DISCOVERY
T7: DM_HandleDiscEvent: Discovery started on Port 5
T7: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=7
T7: MPT_DeviceAddRemove : ADDED - phy x07 devHandle x000e parentDevHdl x0006 phyNum x07 slot x04 deviceInfo=x00000c01 sasAddr=5000c500:4347671d
T7: DM_DeviceInserted: tempdevId[115], DevHandle[e]

T7: iopiEvent: EVENT_SAS_DISCOVERY
T7: DM_HandleDiscEvent: Discovery Completed on Port 5

T7: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=2 StartPhyNum=4

T7: iopiEvent: EVENT_SAS_DISCOVERY
T7: DM_HandleDiscEvent: Discovery Completed on Port 0

T22: PortEnable success... chip x00 EndTime x00000016 TimeTaken x11

T22: MPT_SASIoUnitGetCurrentPage 0 :SASIoUnit = 85ffbb60 size 150
T22: Hdr: ExtPageLength 0, ExtPageType 54 PageNumber 10
T22: PageType f PageVersion 5 NumPhys 8
T22: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate=aa, CtrlPhyDevInf=71 AttDevHdl=9 CtrlDevHdl=1 DiscSts=0
T22: PHY1: Port=1, PortFlags=1, PhyFlags=0, NegRate=aa, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=2 DiscSts=0
T22: PHY2: Port=2, PortFlags=1, PhyFlags=0, NegRate=aa, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=3 DiscSts=0
T22: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate=aa, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=4 DiscSts=0
T22: PHY4: Port=0, PortFlags=1, PhyFlags=0, NegRate=00, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=1 DiscSts=0
T22: PHY5: Port=0, PortFlags=1, PhyFlags=0, NegRate=00, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=1 DiscSts=0
T22: PHY6: Port=4, PortFlags=1, PhyFlags=0, NegRate=aa, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=5 DiscSts=0
T22: PHY7: Port=5, PortFlags=1, PhyFlags=0, NegRate=aa, CtrlPhyDevInf=71 AttDevHdl=e CtrlDevHdl=6 DiscSts=0

T22: Make Chip x00 Active
T22: DM_DevMgrIsChipInit 0 State 400
T22: Ready to start DISM after Chip initialization - Chip x00
T22: DISM: Queued!
T22: DM_DevMgrIsChipInit 0 State 400
T22: DMStartNextStaggeredSpinup Starting Spinup on pd:10 spinIndex:0
T22: DMStartNextStaggeredSpinup Starting Spinup on pd:11 spinIndex:1
T22: DM_DevSpinupTrackerCallback: DevId x0011 errCount 0 Retry 0 Status 2 spinIndex:1 spinupState:2
T22: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 6 asc 29 ascq 1
T22: DM_DevSpinupTrackerCallback: DevId x0010 errCount 0 Retry 0 Status 2 spinIndex:0 spinupState:2
T22: DM_DevSenseRetry  dev 10 Sense Data: Len 40 RespCode 70 senseKey 6 asc 29 ascq 1
T22: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4

作者: luomax 时间: 2011-11-27 20:07
T22: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T22: DM_DevSpinupTrackerCallback TUR done for devId 10 spinIndex:0
T22: DMStartNextStaggeredSpinup Starting Spinup on pd:12 spinIndex:0
T22: DM_DevSpinupTrackerCallback: DevId x0012 errCount 0 Retry 0 Status 2 spinIndex:0 spinupState:2
T22: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 6 asc 29 ascq 1
T22: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T22: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T23: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T23: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T23: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T23: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T24: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T24: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T24: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T24: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T25: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T25: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T25: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T25: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T26: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T26: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T26: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T26: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T27: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T27: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T27: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T27: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T28: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T28: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T28: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T28: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T29: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T29: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T29: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T29: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T30: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T30: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T30: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T30: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T31: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T31: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T31: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T31: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T32: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T32: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T32: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T32: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T33: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T33: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T33: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T33: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T34: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T34: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T34: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T34: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T35: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T35: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T35: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T35: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T36: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T36: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T36: DMStartNextStaggeredSpinup Starting Spinup on pd:13 spinIndex:2
T36: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T36: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T36: DMStartNextStaggeredSpinup Starting Spinup on pd:14 spinIndex:3
T36: DM_DevSpinupTrackerCallback: DevId x0013 errCount 0 Retry 0 Status 2 spinIndex:2 spinupState:2
T36: DM_DevSenseRetry  dev 13 Sense Data: Len 40 RespCode 70 senseKey 6 asc 29 ascq 1
T36: DM_DevSpinupTrackerCallback: DevId x0013 errCount 1 Retry 1 Status 2 spinIndex:2 spinupState:4
T36: DM_DevSenseRetry  dev 13 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T36: DM_DevSpinupTrackerCallback: DevId x0014 errCount 0 Retry 0 Status 2 spinIndex:3 spinupState:2
T36: DM_DevSenseRetry  dev 14 Sense Data: Len 40 RespCode 70 senseKey 6 asc 29 ascq 1
T36: DM_DevSpinupTrackerCallback TUR done for devId 14 spinIndex:3
T36: DMStartNextStaggeredSpinup Starting Spinup on pd:15 spinIndex:3
T36: DM_DevSpinupTrackerCallback: DevId x0015 errCount 0 Retry 0 Status 2 spinIndex:3 spinupState:2
T36: DM_DevSenseRetry  dev 15 Sense Data: Len 40 RespCode 70 senseKey 6 asc 29 ascq 1
T36: DM_DevSpinupTrackerCallback TUR done for devId 15 spinIndex:3
T37: DM_DevSpinupTrackerCallback: DevId x0013 errCount 1 Retry 1 Status 2 spinIndex:2 spinupState:4
T37: DM_DevSenseRetry  dev 13 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T37: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T37: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T37: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T37: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T38: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T38: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T38: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T38: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T38: DM_DevSpinupTrackerCallback: DevId x0013 errCount 1 Retry 1 Status 2 spinIndex:2 spinupState:4
T38: DM_DevSenseRetry  dev 13 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T39: DM_DevSpinupTrackerCallback: DevId x0013 errCount 1 Retry 1 Status 2 spinIndex:2 spinupState:4
T39: DM_DevSenseRetry  dev 13 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T39: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T39: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T39: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T39: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T40: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T40: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T40: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T40: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T40: DM_DevSpinupTrackerCallback: DevId x0013 errCount 1 Retry 1 Status 2 spinIndex:2 spinupState:4
T40: DM_DevSenseRetry  dev 13 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T41: DM_DevSpinupTrackerCallback: DevId x0013 errCount 1 Retry 1 Status 2 spinIndex:2 spinupState:4
T41: DM_DevSenseRetry  dev 13 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T41: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T41: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T41: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T41: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T42: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T42: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T42: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T42: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 11
T42: DM_DevSpinupTrackerCallback: DevId x0013 errCount 1 Retry 1 Status 2 spinIndex:2 spinupState:4
T42: DM_DevSenseRetry  dev 13 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T43: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T43: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T43: DM_DevSpinupTrackerCallback: DevId x0013 errCount 1 Retry 1 Status 2 spinIndex:2 spinupState:4
T43: DM_DevSenseRetry  dev 13 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T43: DM_DevSpinupTrackerCallback: DevId x0011 errCount 1 Retry 1 Status 2 spinIndex:1 spinupState:4
T43: DM_DevSenseRetry  dev 11 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T44: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T44: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T44: DM_DevSpinupTrackerCallback TUR done for devId 13 spinIndex:2
T44: DM_DevSpinupTrackerCallback TUR done for devId 11 spinIndex:1
T45: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T45: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T46: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T46: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T47: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T47: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T48: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T48: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T49: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T49: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T50: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T50: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T51: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T51: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T52: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T52: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T53: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T53: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T54: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T54: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T55: DM_DevSpinupTrackerCallback: DevId x0012 errCount 1 Retry 1 Status 2 spinIndex:0 spinupState:4
T55: DM_DevSenseRetry  dev 12 Sense Data: Len 40 RespCode 70 senseKey 2 asc 4 ascq 1
T56: DM_DevSpinupTrackerCallback TUR done for devId 12 spinIndex:0
T56:  DMStartNextStaggeredSpinup all drives spun up
T56: DevId=12 IdleModes: standby_y=0 standby_z=1  idle_a=1 idle_b=0 idle_c=0
T56: DevId=10 IdleModes: standby_y=0 standby_z=1  idle_a=1 idle_b=0 idle_c=0
T56: DevId=15 IdleModes: standby_y=0 standby_z=1  idle_a=1 idle_b=0 idle_c=0
T56: DevId=13 IdleModes: standby_y=0 standby_z=1  idle_a=1 idle_b=0 idle_c=0
T56: DevId=14 IdleModes: standby_y=0 standby_z=1  idle_a=1 idle_b=0 idle_c=0
T56: DevId=11 IdleModes: standby_y=0 standby_z=1  idle_a=1 idle_b=0 idle_c=0
T56:  DM_DevNotifyRAID: Notify Done. Check for Removal
T56:  DISM Complete
T56: gDevInfo=c1383de0, size=b0
T56: Total Device = 6
T56: PD Flags Size       S N F Vendor Product       Rev  P C ID SAS Addr       Port Phy DevH WU BFw  BRev
T56: -------------------------------------------------------------------------------------------------------------------
T56: 10 f1400005 45dd2faf    0 0 0 SEAGATE  ST3600057SS    0006 0 0 0a 5000c5001c802879 01 01  0a 0  NA NA
T56: 11 f1400005 45dd2faf    0 0 0 SEAGATE  ST3600057SS    0006 0 0 0c 5000c5001c81a629 03 03  0c 0  NA NA
T56: 12 f1400005 45dd2faf    0 0 0 SEAGATE  ST3600057SS    ES64 0 0 0e 5000c5004347671d 05 07  0e 0  NA NA
T56: 13 f1400005 45dd2faf    0 0 0 SEAGATE  ST3600057SS    0006 0 0 0d 5000c5001c825e75 04 06  0d 0  NA NA
T56: 14 f1400005 45dd2faf    0 0 0 SEAGATE  ST3600057SS    ES64 0 0 09 5000c5004347babd 00 00  09 0  NA NA
T56: 15 f1400005 45dd2faf    0 0 0 SEAGATE  ST3600057SS    0006 0 0 0b 5000c5001c820e89 02 02  0b 0  NA NA
T56: 100  00400005 0          0 0 0 LSI    SMP/SGPIO/SEP 1320 0 0 ffff             0 00 ff  ffff 0  NA NA

T56: PhyId 0 Sas 5000c5004347babd Type 1 IsSata 0, Smp 0:0
T56: PhyId 0 Sas 5000c5001c802879 Type 1 IsSata 0, Smp 0:0
T56: PhyId 0 Sas 5000c5001c820e89 Type 1 IsSata 0, Smp 0:0
T56: PhyId 0 Sas 5000c5001c81a629 Type 1 IsSata 0, Smp 0:0
T56: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0
T56: PhyId 0 Sas 0 Type 0 IsSata 0, Smp 0:0
T56: PhyId 0 Sas 5000c5001c825e75 Type 1 IsSata 0, Smp 0:0
T56: PhyId 0 Sas 5000c5004347671d Type 1 IsSata 0, Smp 0:0
T56: Load Balance Statistics Path0PDs 6 Path1PDs 0
T56:  DM_DevMgr become Ready- state 15
T56: EnclSgpioAdd: find ICO_SGPIO type Numslot=8, EnclHandle=1, StartSlot=0
T56: SGPIO slot mapping pd=10 is mapped to slot=2
T56: SGPIO slot mapping pd=11 is mapped to slot=0
T56: SGPIO slot mapping pd=12 is mapped to slot=4
T56: SGPIO slot mapping pd=13 is mapped to slot=5
T56: SGPIO slot mapping pd=14 is mapped to slot=3
T56: SGPIO slot mapping pd=15 is mapped to slot=1
T56: StaggeredSpinUp complete
T56: EVT#04328-T56:  91=Inserted: PD 10(e0xfc/s2)
T56: EVT#04329-T56: 247=Inserted: PD 10(e0xfc/s2) Info: enclPd=fc, scsiType=0, portMap=01, sasAddr=5000c5001c802879,0000000000000000
T56: EVT#04330-T56:  91=Inserted: PD 11(e0xfc/s0)
T56: EVT#04331-T56: 247=Inserted: PD 11(e0xfc/s0) Info: enclPd=fc, scsiType=0, portMap=03, sasAddr=5000c5001c81a629,0000000000000000
T56: EVT#04332-T56:  91=Inserted: PD 12(e0xfc/s4)
T56: EVT#04333-T56: 247=Inserted: PD 12(e0xfc/s4) Info: enclPd=fc, scsiType=0, portMap=05, sasAddr=5000c5004347671d,0000000000000000
T56: EVT#04334-T56:  91=Inserted: PD 13(e0xfc/s5)
T56: EVT#04335-T56: 247=Inserted: PD 13(e0xfc/s5) Info: enclPd=fc, scsiType=0, portMap=04, sasAddr=5000c5001c825e75,0000000000000000
T56: EVT#04336-T56:  91=Inserted: PD 14(e0xfc/s3)
T56: EVT#04337-T56: 247=Inserted: PD 14(e0xfc/s3) Info: enclPd=fc, scsiType=0, portMap=00, sasAddr=5000c5004347babd,0000000000000000
T56: EVT#04338-T56:  91=Inserted: PD 15(e0xfc/s1)
T56: EVT#04339-T56: 247=Inserted: PD 15(e0xfc/s1) Info: enclPd=fc, scsiType=0, portMap=02, sasAddr=5000c5001c820e89,0000000000000000
T56: KM_KeyMgmtInit: security is not enabled
T56: KM_GetRandomNumber: security is not enabled
T56: DDF_ConfigRead: perfect match found at pd=10, cod=85d7a8e0
T56: DDF_ConfigRead: reference found at pd=10, merging config
T56: DDF_Merge: copying bvd record for ld=0, span=0 from pd=10 at partition=0
T56: missingSpan =0
T56: ddfInitStatus: 0
T56: configRaid: adding to raid config
T56: configRaidAddSpan: adding ld=0 span=0
T56: ddfInitStatus after CheckForOfflinePRL11VDs : 0
T56: oldCfgMapGet : oldAr=0, newAr=0
T57: rollBackActiveTargetIds=0 ,missingRepTargetIds=0
T57: RAID Policy Change Request: ld=0 tgtId:0
T57: RAID Policy Change Request: ld=0 tgtId:0
T57: init_cache: recoverCache = 0 pinned_cache_present = 0
T57: Total memory available for disk cache: 37ef22c8
T57: Total Number of Cache Lines 7126
T57: SS  256: ss=8 mrs=6  lc=7126 ldc=1  ba=100000000000 LDs: 0
T57: Total Number of Cache Lines 7126
T57: SS  256: ss=8 mrs=6  lc=7126 ldc=1  ba=10000852f400 LDs: 0
T57: Cache initialization complete...Config info
T57: ARs configured: 1
T57: Ar 0: size=45cd0000, activeLd=1, numPd=6, seq=0, powerSave=0 powerSaveInProgress=0 PDs: 14(fc/3) 15(fc/1) 10(fc/2) 11(fc/0) 12(fc/4) 13(fc/5)
T57: LD  0: L=5  SS=256  Size=15d010000  NL=7126  Status=3  DT=3135  BT=4970, Encr=0, prop=[ID=00,dcp=75,ccp=75,ap=0,dc=1,dbgi=0,S=0|0,dps=00,cps=fe]
T57:       span 0: sBlk=00000000, nBlk=45cd0000, ar=0
T57: max-flush (Ar 0): 0x90
T57: setup_cache_headers: ***** totalDirtyLines: 0  recoverCache: 0
T57: RAID Policy Change Request: ld=0 tgtId:0
T57: pdFailHistInit: count=0
T57: pdFailHistInit: count=0
T57: LdRecoverNvram:ld 0- consStatus = 1
T57: Initializing write journal entries
T57: NOT Flushing Cache
T57: ldSecureEraseResumeFromPowerCycle: command block is active
T57: RMW: NVRAM structure valid - checking for active RMWs
T57: EVT#04340-T57: 406=Reminder: Potential non-optimal configuration due to drive PD 10(e0xfc/s2) commissioned as emergency spare
T57: EVT#04341-T57: 406=Reminder: Potential non-optimal configuration due to drive PD 11(e0xfc/s0) commissioned as emergency spare
T57: EVT#04342-T57: 406=Reminder: Potential non-optimal configuration due to drive PD 12(e0xfc/s4) commissioned as emergency spare
T57: EVT#04343-T57: 406=Reminder: Potential non-optimal configuration due to drive PD 13(e0xfc/s5) commissioned as emergency spare
T57: EVT#04344-T57: 406=Reminder: Potential non-optimal configuration due to drive PD 14(e0xfc/s3) commissioned as emergency spare
T57: EVT#04345-T57: 406=Reminder: Potential non-optimal configuration due to drive PD 15(e0xfc/s1) commissioned as emergency spare
T57: SRIOV is disabled, setting maxQueues to 10
T57: CCR Reset Status clear 7f0
T57: No secondary cache found
T57: MonCheckAllowChipReset: MonAllowResetChip 1
T57: MrRegionLockBypassEnableAll: : cmdId=ffff
T57: LdEvaluateRLBypass: Requesting Bypass Disable for Ld=0 tgtId=0
T57: DEV_REC:IllegalReq- CDB: 4d 0 2f 0 0 0 0 0 c 0
T57: ILLEGAL REQ: pRdm(804aa600) Cmd=3, Sns=804aa640 DevId[10] devHandle a info:0, aslen= 0, asc= a, Ascq 24, Sks: 0, fp=00cd
T57: DDF_TimestampGet: using nvram time=11/27  7:59:13 + rtc=57 to set timestamp
T57: DEV_REC:IllegalReq- CDB: 4d 0 2f 0 0 0 0 0 c 0
T57: ILLEGAL REQ: pRdm(804aa600) Cmd=3, Sns=804aa640 DevId[11] devHandle c info:0, aslen= 0, asc= a, Ascq 24, Sks: 0, fp=00cd
T57: DEV_REC:IllegalReq- CDB: 4d 0 2f 0 0 0 0 0 c 0
T57: ILLEGAL REQ: pRdm(804aa600) Cmd=3, Sns=804aa640 DevId[13] devHandle d info:0, aslen= 0, asc= a, Ascq 24, Sks: 0, fp=00cd
T57: DEV_REC:IllegalReq- CDB: 4d 0 2f 0 0 0 0 0 c 0
T57: ILLEGAL REQ: pRdm(804aa600) Cmd=3, Sns=804aa640 DevId[15] devHandle b info:0, aslen= 0, asc= a, Ascq 24, Sks: 0, fp=00cd
T57: LdEvaluateRLBypass: Requesting Bypass Disable for Ld=0 tgtId=0
T57: MrRegionLockBypassDisable: ld=0
T57: MfiDriverSyncRequiredSet - Driver ldsync required 1

作者: luomax 时间: 2011-11-27 20:08
太多了，不晓得捕全没有

作者: per1-q1222 时间: 2011-11-27 20:11

luomax 发表于 2011-11-27 20:08
太多了，不晓得捕全没有

你不能存成文字本上傳嗎?...

作者: luomax 时间: 2011-11-27 20:26

per1-q1222 发表于 2011-11-27 20:11
你不能存成文字本上傳嗎?...

不允许传文本得嘛

作者: luomax 时间: 2011-11-27 20:27
哦，压缩包

作者: luomax 时间: 2011-11-27 20:28
软件界面里面的

作者: luomax 时间: 2011-11-27 20:29
我记得NVRAM是128K？怎么才32K

作者: luomax 时间: 2011-11-27 20:30
折腾惨了

作者: per1-q1222 时间: 2011-11-27 20:55
本帖最后由 per1-q1222 于 2011-11-27 20:55 编辑

請設成256K, DIO, WB, RA....

作者: per1-q1222 时间: 2011-11-27 20:56

luomax 发表于 2011-11-27 20:28
软件界面里面的

這個只是metadata的部分..
他通常是塞在HDD的頭或著尾...

作者: per1-q1222 时间: 2011-11-27 21:09

luomax 发表于 2011-11-27 20:29
我记得NVRAM是128K？怎么才32K

那個資訊一直都是顯示32K...
我沒有問過LSI這部分..

作者: luomax 时间: 2011-11-27 21:24

per1-q1222 发表于 2011-11-27 20:55
請設成256K, DIO, WB, RA....

分别是哪啊

作者: per1-q1222 时间: 2011-11-27 22:45

luomax 发表于 2011-11-27 21:24
分别是哪啊

[attach]1699442[/attach]

作者: luomax 时间: 2011-11-28 00:33

per1-q1222 发表于 2011-11-27 22:45

谢啦

作者: luomax 时间: 2011-11-28 11:02

per1-q1222 发表于 2011-11-27 22:45

[attach]1699759[/attach]照做了个，突发怎么那么低呢？

作者: per1-q1222 时间: 2011-11-28 12:16
本帖最后由 per1-q1222 于 2011-11-28 12:16 编辑

luomax 发表于 2011-11-28 11:02
照做了个，突发怎么那么低呢？

圖都看不清楚了..
你一定要照相嗎?=_=
有一種組合按鍵叫做"ALT+PRINT SCREEN"..
請貼到小畫家或著相關繪圖工具..

作者: luckissy 时间: 2011-11-28 12:26

luomax 发表于 2011-11-28 11:02
照做了个，突发怎么那么低呢？

cpu占用率亮了。。。

作者: luomax 时间: 2011-12-1 19:22

per1-q1222 发表于 2011-11-28 12:16
圖都看不清楚了..
你一定要照相嗎?=_=
有一種組合按鍵叫做"ALT+PRINT SCREEN"..

只装了个系统，连网都没上

欢迎光临 POPPUR爱换 (https://we.poppur.com/)