POPPUR爱换

标题: H700电池关闭了怎么开启呀 [打印本页]

作者: ey2h    时间: 2012-6-18 11:30
标题: H700电池关闭了怎么开启呀
H700电池关闭了怎么开启呀
提示
Controller ID: 0 BBU disabled; changing WB logical drives to WT

作者: per1-q1222    时间: 2012-6-18 12:37
upload your tty log..
[attach]1919112[/attach]
作者: ey2h    时间: 2012-6-18 12:54
本帖最后由 ey2h 于 2012-6-18 12:55 编辑
per1-q1222 发表于 2012-6-18 12:37
upload your tty log..

[attach]1919125[/attach]
这个提示是电池坏了吗?是不是买个新的换上就好?

作者: per1-q1222    时间: 2012-6-18 12:56
ey2h 发表于 2012-6-18 12:54
这个提示是电池坏了吗?是不是买个新的换上就好?

請上傳tty log..
作者: ey2h    时间: 2012-6-18 13:06
per1-q1222 发表于 2012-6-18 12:37
upload your tty log..

[attach]1919154[/attach]
log帮忙看看,要修理了

作者: ey2h    时间: 2012-6-18 14:12
看样子是电池松了或者坏了?
作者: per1-q1222    时间: 2012-6-18 17:52
本帖最后由 per1-q1222 于 2012-6-19 00:10 编辑

你給我message log不明確..
http://www.osslab.com.tw/Storage ... ck_Training/TTY_Log(Firmware_Log)
作者: ey2h    时间: 2012-6-20 10:52
per1-q1222 发表于 2012-6-18 17:52
你給我message log不明確..
http://www.osslab.com.tw/Storage ... ck_Training/TTY_Log(Firmware_Log)

[attach]1921395[/attach]
麻烦再看看,谢谢

作者: per1-q1222    时间: 2012-6-20 12:28
T35: BbuInit: eBBU not present.  Disable eBBU feature
T35: Charger detected Battery removal or Charger Fault condition  
T35: EVT#14098-T35: 161=Battery removed
T35: PdInit: PD_INFO entries are 0x280 bytes


BBU毀損..
要更換..
作者: ey2h    时间: 2012-6-20 16:06
per1-q1222 发表于 2012-6-20 12:28
T35: BbuInit: eBBU not present.  Disable eBBU feature
T35: Charger detected Battery removal or Char ...

就是买个新电池换上自己就好了?谢谢
作者: per1-q1222    时间: 2012-6-20 16:07
ey2h 发表于 2012-6-20 16:06
就是买个新电池换上自己就好了?谢谢

是的
作者: ey2h    时间: 2012-6-21 18:46
本帖最后由 ey2h 于 2012-6-21 18:47 编辑
per1-q1222 发表于 2012-6-20 16:07
是的

[attach]1923187[/attach]他妈的买了新电池他又自己好了,神经病呀!
帮忙看看log,谢谢
[attach]1923188[/attach]
作者: per1-q1222    时间: 2012-6-21 19:10
ey2h 发表于 2012-6-21 18:46
他妈的买了新电池他又自己好了,神经病呀!
帮忙看看log,谢谢

從log來看...有一個很奇怪的行為發生..
14131: 2012-6-20,12:34:29 Information: Battery Present
14132: 2012-6-20,12:35:24 Warning: Battery removed
14133: 2012-6-20,12:35:24 Critical: Battery/charger problems detected; SOH Bad
14134: 2012-6-20,13:0:3 Information: Time established as 06/20/12 13:00:03; (8524 seconds since power on)
14135: 2012-6-20,13:55:24 Information: Battery Present
14136: 2012-6-20,13:56:29 Information: Battery temperature is normal
14137: 2012-6-20,13:56:29 Warning: Current capacity of the battery is below threshold
14138: 2012-6-20,13:56:44 Warning: Battery removed
14139: 2012-6-20,13:56:44 Critical: Battery/charger problems detected; SOH Bad
14140: 2012-6-20,14:0:3 Information: Time established as 06/20/12 14:00:03; (12124 seconds since power on)
14141: 2012-6-20,15:0:3 Information: Time established as 06/20/12 15:00:03; (15724 seconds since power on)
14142: 2012-6-20,15:8:35 Information: Shutdown command received from host

14143: 1999-6-20,19:40:17 Information: Firmware initialization started (PCI ID 0079/1000/1f16/1028)
14144: 1999-6-20,19:40:17 Information: Firmware version 2.100.03-1405
14145: 1999-6-20,19:40:19 Information: Battery Present
14146: 1999-6-20,19:40:19 Information: Package version 12.10.2-0004
14147: 1999-6-20,19:40:19 Information: Board Revision 667
14166: 2012-6-20,15:29:15 Information: Time established as 06/20/12 15:29:15; (64 seconds since power on)
14167: 2012-6-20,15:29:51 Information: Battery temperature is normal
14168: 2012-6-20,15:29:51 Warning: Current capacity of the battery is below threshold
14169: 2012-6-20,15:29:51 Information: Battery started charging
14170: 2012-6-20,15:29:51 Warning: BBU disabled; changing WB virtual disks to WT, Forced WB VDs are not affected
14171: 2012-6-20,15:29:51 Information: Policy change on VD 00/0 to [ID=00,dcp=61,ccp=60,ap=0,dc=1,dbgi=0,S=0|0] from [ID=00,dcp=61,ccp=61,ap=0,dc=1,dbgi=0,S=0|0]
14172: 2012-6-20,15:29:51 Information: Policy change on VD 01/1 to [ID=01,dcp=65,ccp=64,ap=0,dc=1,dbgi=1,S=0|0] from [ID=01,dcp=65,ccp=65,ap=0,dc=1,dbgi=1,S=0|0]
14173: 2012-6-20,15:29:51 Information: Policy change on VD 02/2 to [ID=02,dcp=05,ccp=04,ap=0,dc=0,dbgi=0,S=0|0] from [ID=02,dcp=05,ccp=05,ap=0,dc=0,dbgi=0,S=0|0]
14174: 2012-6-20,15:33:58 Information: Time established as 06/20/12 15:33:58; (347 seconds since power on)
14175: 2012-6-20,16:0:58 Information: Time established as 06/20/12 16:00:58; (1967 seconds since power on)
14176: 2012-6-20,16:20:46 Information: Current capacity of the battery is above threshold
14177: 2012-6-20,16:20:46 Information: BBU enabled; changing WT virtual disks to WB
他有可能是一個bug, 但我不是很確定...
你嘗試做CC看看..
看會不會bus reset情況..


作者: ey2h    时间: 2012-6-21 19:36
我升级了最新的固件A8说是修复了这种WT-WB的问题,但是刷完没反应,今天到好了太怪了
CC是什么?
作者: per1-q1222    时间: 2012-6-21 19:46
ey2h 发表于 2012-6-21 19:36
我升级了最新的固件A8说是修复了这种WT-WB的问题,但是刷完没反应,今天到好了太怪了
CC是什么?

Consistency Check..
看衝進cache的時候..
是否發生異常狀況..
作者: ey2h    时间: 2012-6-21 19:52
per1-q1222 发表于 2012-6-21 19:10
從log來看...有一個很奇怪的行為發生..
14131: 2012-6-20,12:34:29 Information: Battery Present
1413 ...

找到CC了开始了,漫长等待4个2T组raid5
作者: ey2h    时间: 2012-6-22 09:03
per1-q1222 发表于 2012-6-21 19:46
Consistency Check..
看衝進cache的時候..
是否發生異常狀況..

[attach]1923545[/attach]应该是有问题,又出现没连接电池情况出现。
作者: ey2h    时间: 2012-6-22 11:03
per1-q1222 发表于 2012-6-21 19:46
Consistency Check..
看衝進cache的時候..
是否發生異常狀況..

[attach]1923635[/attach]换了新电池,好像还没我呢个好都循环14次了
区别是maximum error margin 一个是100%一个是0%
电池容量也不一样!一个07年一个08年

作者: per1-q1222    时间: 2012-6-22 11:16
本帖最后由 per1-q1222 于 2012-6-22 11:17 编辑
ey2h 发表于 2012-6-22 11:03
换了新电池,好像还没我呢个好都循环14次了
区别是maximum error margin 一个是100%一个是0%
电池容量也 ...

区别是maximum error margin 一个是100%一个是0%

不懂你這段的意思..


LSI的BBU第一次使用時, 會有初始化的情況...
一開始會有maximum error margin =100%的情況..
實屬正常情況...
第一次使用需要等待比較漫長的時間..init+relearn+charge...





作者: ey2h    时间: 2012-6-22 11:20
哦,这是正常的,那我慢慢等吧,谢谢了。
作者: ey2h    时间: 2012-6-22 11:21
per1-q1222 发表于 2012-6-22 11:16
区别是maximum error margin 一个是100%一个是0%

不懂你這段的意思..

[attach]1923655[/attach]
新问题直接说更换电池

作者: per1-q1222    时间: 2012-6-22 11:22
本帖最后由 per1-q1222 于 2012-6-22 11:22 编辑
ey2h 发表于 2012-6-22 11:20
哦,这是正常的,那我慢慢等吧,谢谢了。

所以你已經換掉電池了??..
我查看你0622的tty log...
你有給他做過自我學習的手動操作??(原本那顆)
作者: per1-q1222    时间: 2012-6-22 11:23
ey2h 发表于 2012-6-22 11:21
新问题直接说更换电池[sweat>

你這些錯誤訊息是原本的電池嗎?
作者: ey2h    时间: 2012-6-22 11:28
per1-q1222 发表于 2012-6-22 11:23
你這些錯誤訊息是原本的電池嗎?

WZZ-SERVER20120622.rar是CC后的log
WZZ-SERVER new.rar还有后面的信息是刚换了电池
作者: ey2h    时间: 2012-6-22 11:29
per1-q1222 发表于 2012-6-22 11:22
所以你已經換掉電池了??..
我查看你0622的tty log...
你有給他做過自我學習的手動操作??(原本那顆)

原来那个自动学习了
作者: per1-q1222    时间: 2012-6-22 11:33
本帖最后由 per1-q1222 于 2012-6-22 11:33 编辑
ey2h 发表于 2012-6-22 11:29
原来那个自动学习了

你在原本的BBU上有手動自我學習嗎?..
還是他自動操作的?..
我發現有些問題(原來的那顆)..
作者: ey2h    时间: 2012-6-22 11:34
我手动的
作者: ey2h    时间: 2012-6-22 15:15
per1-q1222 发表于 2012-6-22 11:33
你在原本的BBU上有手動自我學習嗎?..
還是他自動操作的?..
我發現有些問題(原來的那顆)..

我手动的




欢迎光临 POPPUR爱换 (https://we.poppur.com/) Powered by Discuz! X3.4