POPPUR爱换

标题: DELL H710P SLOT ID重複問題.. [打印本页]

作者: per1-q1222 时间: 2012-8-21 06:29
标题: DELL H710P SLOT ID重複問題..
本帖最后由 per1-q1222 于 2012-8-21 06:31 编辑

有網兄傳了一份TTY Log...
在SAS Topology Descovery階段所發生的一個異常現象...
T7: iopiEvent: EVENT_SAS_DISCOVERY
T7: DM_HandleDiscEvent: Discovery started on Port 0

T7: MPT_Event: EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE
T7: iopiEvent: EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE
T7: DM_HndlEnclStatusChgEvnt: EnclosureHandle x0001 Reason x01 PhysicalPort 0
T7: ELI 5d4ae52091901f00 NumSlots x0008 StartSlot x001c PhyBits x00000000 IOCLogInfo x00000000 IOCStatus x0000
T7: Ctrl enclosure device added
T7: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=3 StartPhyNum=4

T8: iopiEvent: EVENT_SAS_DISCOVERY
T8: DM_HandleDiscEvent: Discovery Completed on Port 0

T10: iopiEvent: EVENT_SAS_DISCOVERY
T10: DM_HandleDiscEvent: Discovery started on Port 0
T10: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=0
T10: MPT_DeviceAddRemove : ADDED - phy x00 devHandle x0009 parentDevHdl x0001 phyNum x00 slot x1c deviceInfo=x00000881 sasAddr=44332211:0
T10: DM_DeviceInserted: tempdevId[110], DevHandle[9]

T10: iopiEvent: EVENT_SAS_DISCOVERY
T10: DM_HandleDiscEvent: Discovery Completed on Port 0

T10: iopiEvent: EVENT_SAS_DISCOVERY
T10: DM_HandleDiscEvent: Discovery started on Port 1
T10: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=7
T10: MPT_DeviceAddRemove : ADDED - phy x07 devHandle x000a parentDevHdl x0002 phyNum x07 slot x1c deviceInfo=x00000881 sasAddr=44332211:7000000
T10: DM_DeviceInserted: tempdevId[111], DevHandle[a]

T10: iopiEvent: EVENT_SAS_DISCOVERY
T10: DM_HandleDiscEvent: Discovery Completed on Port 1

T11: iopiEvent: EVENT_SAS_DISCOVERY
T11: DM_HandleDiscEvent: Discovery started on Port 2
T11: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=1
T11: MPT_DeviceAddRemove : ADDED - phy x01 devHandle x000b parentDevHdl x0003 phyNum x01 slot x1d deviceInfo=x00000881 sasAddr=44332211:1000000
T11: DM_DeviceInserted: tempdevId[112], DevHandleT11: iopiEvent: EVENT_SAS_DISCOVERY
T11: DM_HandleDiscEvent: Discovery Completed on Port 2

T11: iopiEvent: EVENT_SAS_DISCOVERY
T11: DM_HandleDiscEvent: Discovery started on Port 3
T11: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=3
T11: MPT_DeviceAddRemove : ADDED - phy x03 devHandle x000c parentDevHdl x0004 phyNum x03 slot x1f deviceInfo=x00000881 sasAddr=44332211:3000000
T11: DM_DeviceInserted: tempdevId[113], DevHandle[c]

T11: iopiEvent: EVENT_SAS_DISCOVERY
T11: DM_HandleDiscEvent: Discovery Completed on Port 3

T11: iopiEvent: EVENT_SAS_DISCOVERY
T11: DM_HandleDiscEvent: Discovery started on Port 4
T11: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=2
T11: MPT_DeviceAddRemove : ADDED - phy x02 devHandle x000d parentDevHdl x0005 phyNum x02 slot x1e deviceInfo=x00000881 sasAddr=44332211:2000000
T11: DM_DeviceInserted: tempdevId[114], DevHandle[d]

T11: iopiEvent: EVENT_SAS_DISCOVERY
T11: DM_HandleDiscEvent: Discovery Completed on Port 4

T21: PortEnable success... chip x00 EndTime x00000015 TimeTaken x10
這看起來像是一個bug...

作者: proe 时间: 2012-8-21 10:18
不是有人说过，不用原装笼子就会出这问题么？

作者: per1-q1222 时间: 2012-8-21 12:42

proe 发表于 2012-8-21 10:18
不是有人说过，不用原装笼子就会出这问题么？

我不清楚所謂原裝籠子是指甚麼樣籠子..
但是就我從H/W Log來看..
這個現象並不正常..

作者: stonecold 时间: 2012-8-22 10:16

per1-q1222 发表于 2012-8-21 12:42
我不清楚所謂原裝籠子是指甚麼樣籠子..
但是就我從H/W Log來看..
這個現象並不正常..

我也遇到这个问题了，不用笼子的情况下必然发生的·~~~

作者: 爱喝可乐的小白 时间: 2012-8-22 23:05

stonecold 发表于 2012-8-22 10:16
我也遇到这个问题了，不用笼子的情况下必然发生的·~~~

什么笼子才会没有这个问题？

欢迎光临 POPPUR爱换 (https://we.poppur.com/)