POPPUR爱换

标题: LSI LSISAS2108/2008 new f/w v12.12.0-0124 / 20.10.1-0119 [打印本页]

作者: per1-q1222 时间: 2012-10-18 04:30
标题: LSI LSISAS2108/2008 new f/w v12.12.0-0124 / 20.10.1-0119
本帖最后由 per1-q1222 于 2012-10-18 04:30 编辑

LSISAS2108
http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/MERGED_12.12.0-0124_SAS_2108_FW_Image_2.130.363-1846.zip
Current Firmware Package (with CacheCade Pro 2.0): 12.12.0-0124 (Merged)
Firmware 2.130.363-1846
Medusa_Expander SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00
NVDATA 2.09.03-0039
BootBlockCommon 09.250.01.219
BootBlock 2.02.00.00-0000
ROMENV 1.08
WebBIOS 6.0-51-e_47_Rel
PCLI 4.04.20
UEFI_Driver 0x05180000
Hii 1.32.00
BIOS 3.25.00
FCODE 4.12.05.00
Firmware:
=========
SCGCQ00263446 - (Closed) - Support SGPIO SideBand with/without Activity
SCGCQ00296744 - (Closed) - enable Emergency hotspare capability for channel
SCGCQ00323446 - (Closed) - Add NVDATA support to make 512 Emulated drive support as configurable for customers.
SCGCQ00286613 - (Closed) - ER corresponding to LSIP200230920
SCGCQ00290530 - (Closed) - Band Gap charging for iBBU08
SCGCQ00288679 - (Implemented) - ER corresponding to LSIP200122939
SCGCQ00290531 - (Closed) - Learn Improvement - Do not take Command block if there is no LD for which cache policy will change
SCGCQ00308820 - (Closed) - Bbumode is 5 instead of 0 for iBBU07
SCGCQ00311062 - (Closed) - Fatal firmware error: Line 1842 during FC import
SCGCQ00284536 - (Closed) - 9260 controller VD goes offline during Slow/Full/Foreground Initialize with 3TB Seagate SED SAS drives
SCGCQ00301160 - (Closed) - Limited band Charging for all OEMs
SCGCQ00298687 - (Closed) - Code Review defect to handle SA_INVALID_FIELD_IN_CDB
SCGCQ00292830 - (Closed) - FW correctly removes entries in the SBBM table by properly shifting the entries to the right.
SCGCQ00292943 - (Closed) - Allocate BBLog for iMR Initally during boot up
SCGCQ00295474 - (Closed) - BBU mode is set to 5 for BBU07 in ctrl-h
SCGCQ00294981 - (Closed) - FW Montask on every boot
SCGCQ00252606 - (Closed) - Drive fails after I/O timeout and subsequent target reset during continuous firmware flash.
SCGCQ00295130 - (Closed) - spare pointer is incorrectly used in MR_CONFIG_DATA
SCGCQ00290512 - (Closed) - Checked in the review comment for SCGCQ00286613
SCGCQ00313883 - (Closed) - Battery continually stating Battery Yearly Deep Discharge Relearn Pending. Please Initiate a manual Relearn
SCGCQ00319537 - (Closed) - System hang on OEM machine with a critical boot message
WebBIOS:
========
SCGCQ00295052 (DFCT) - Change BBU Mode description for Liberator batteries.
HII:
====
SCGCQ00294957 (DFCT) - Manage SSD Caching is showing all the VD's in the list in HII.

LSISAS2008
http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/MERGED_20.10.1-0119_SAS_2008_FW_Image_APP-2.130.364-1847.zip
Current Firmware Package: 20.10.1-0119 (Merged)
Firmware 2.130.364-1847
WebBIOS 4.0-59-e_48-Rel
ROMENV 1.08
BootBlock 2.02.00.00-0001
NVDATA 3.09.03-0043
PCLI 03.02.20
Hii 1.31.00
UEFI_Driver 0x05180000
FCODE 4.12.05.00
BIOS 4.31.00
Firmware:
=========
SCGCQ00308820 - (Closed) - Bbumode is 5 instead of 0 for iBBU07
SCGCQ00311062 - (Closed) - Fatal firmware error: Line 1842 during FC import
SCGCQ00284536 - (Closed) - 9260 controller VD goes offline during Slow/Full/Foreground Initialize with 3TB Seagate SED SAS drives
SCGCQ00301160 - (Closed) - Limited band Charging for all OEMs
SCGCQ00298687 - (Closed) - Code Review defect to handle SA_INVALID_FIELD_IN_CDB
SCGCQ00292830 - (Closed) - FW correctly removes entries in the SBBM table by properly shifting the entries to the right.
SCGCQ00292943 - (Closed) - Allocate BBLog for iMR Initally during boot up
SCGCQ00295474 - (Closed) - BBU mode is set to 5 for BBU07 in ctrl-h
SCGCQ00294981 - (Closed) - FW Montask on every boot
SCGCQ00252606 - (Closed) - Drive fails after I/O timeout and subsequent target reset during continuous firmware flash.
SCGCQ00284230 - (Closed) - Megamon during Injecting errors to VD with 512e PDs on iMR controller
SCGCQ00295130 - (Closed) - spare pointer is incorrectly used in MR_CONFIG_DATA
SCGCQ00290512 - (Closed) - Checked in the review comment for SCGCQ00286613
SCGCQ00313883 - (Closed) - Battery continually stating Battery Yearly Deep Discharge Relearn Pending. Please Initiate a manual Relearn
SCGCQ00319537 - (Closed) - System hang on OEM machine with a critical boot message
SCGCQ00263446 - (Closed) - Support SGPIO SideBand with/without Activity
SCGCQ00296744 - (Closed) - enable Emergency hotspare capability for channel
SCGCQ00323446 - (Closed) - Add NVDATA support to make 512 Emulated drive support as configurable for customers.
SCGCQ00286613 - (Closed) - ER corresponding to LSIP200230920
SCGCQ00290530 - (Closed) - Band Gap charging for iBBU08
SCGCQ00288679 - (Implemented) - ER corresponding to LSIP200122939
SCGCQ00290531 - (Closed) - Learn Improvement - Do not take Command block if there is no LD for which cache policy will change
WebBIOS:
========
SCGCQ00295052 (DFCT) - Change BBU Mode description for Liberator batteries.

作者: hammer999 时间: 2012-10-18 09:15
老大，请问这个和H700通用么？H700的最新固件是啥版本呢？

作者: saila 时间: 2012-10-19 02:06

hammer999 发表于 2012-10-18 09:15
老大，请问这个和H700通用么？H700的最新固件是啥版本呢？

不通用
H700最新固件是A12
不過你的系統要是屬於微軟體系更新到 A10即可
A11 A12是針對LINUX系統的更新,DELL也只附LINUX使用的更新韌體

作者: hammer999 时间: 2012-10-19 22:01

saila 发表于 2012-10-19 02:06
不通用
H700最新固件是A12
不過你的系統要是屬於微軟體系更新到 A10即可

谢谢兄弟的回答。我刚才看了看，我的H700好像还是A00的固件，现在在用着阵列。是否有必要升级呢。

作者: slowhand 时间: 2012-10-22 16:43
升级没问题，我已经升级了！担心的先备份数据

作者: hammer999 时间: 2012-10-22 22:01
兄弟升级后，是感觉性能或者稳定性上有啥变化么

作者: slowhand 时间: 2012-10-23 13:19
藐视没啥变化，反正没有感觉出来

作者: saila 时间: 2012-10-27 08:41
lsi網站這版Firmware被拿掉了,ms driver也換成之前的舊版
不知道是什麼問題

作者: idolclub 时间: 2012-10-27 21:10

saila 发表于 2012-10-27 08:41
lsi網站這版Firmware被拿掉了,ms driver也換成之前的舊版
不知道是什麼問題

新firmware有機會導致VD消失，幾天前已經撤了，已升級的建議刷回舊版

作者: asif2001 时间: 2012-10-27 23:22
本帖最后由 asif2001 于 2012-10-27 23:23 编辑

idolclub 发表于 2012-10-27 21:10
新firmware有機會導致VD消失，幾天前已經撤了，已升級的建議刷回舊版

舊版指的是 23.7.0-0035 這系列的嗎?

LSI 2208 的f/w，DRIVER也都被撤掉了....

作者: saila 时间: 2012-10-28 02:23

idolclub 发表于 2012-10-27 21:10
新firmware有機會導致VD消失，幾天前已經撤了，已升級的建議刷回舊版

原來如此,感謝說明

作者: slowhand 时间: 2012-10-29 14:10
已经刷回旧版的了！折腾呀，下次要等等才升级！

作者: idolclub 时间: 2012-10-29 21:03

asif2001 发表于 2012-10-27 23:22
舊版指的是 23.7.0-0035 這系列的嗎?

LSI 2208 的f/w，DRIVER也都被撤掉了....

可換回現時LSI網站上的版本

欢迎光临 POPPUR爱换 (https://we.poppur.com/)