| CPU Socket | 2011 (SquareType,80 x 80mm mounting pitch) |
 |
| CPU Support | Intel® Sandy Bridge Romley-EP/EX Processors up to TDP 160 Watts overclocking |
|
| Solution | 3U&Up, Workstation & Tower Desktop Solution |
|
| Overall Dimension | 91.0 x 91.0 x 110.0 mm |
|
| Weight | 530 g |
|
| Material | Aluminum Fins, 4x Heat Pipes with H.C.C. Technology |
|
| Fan Dimension | Ø92 x 25 mm |
|
| Speed | At Duty Cycle 20%: 1000 RPM
At Duty Cycle 50%: 1800 RPM
At Duty Cycle 100%: 2500 RPM |
|
| Bearing | 2 Ball Bearing |
|
| Rated Voltage | 12 V |
|
| Power | At Duty Cycle 20%: 0.96 W
At Duty Cycle 50%: 1.44 W
At Duty Cycle 100%: 3.0 W |
|
| Air Flow | At Duty Cycle 20%: 17.34 CFM
At Duty Cycle 50%: 31.21 CFM
At Duty Cycle 100%: 43.36 CFM |
|
| Noise Level | At Duty Cycle 20%: 17.0 dBA
At Duty Cycle 50%: 24.78 dBA
At Duty Cycle 100%: 31.92 dBA |
|
| Air Pressure | At Duty Cycle 20%: 0.48 mm-H2O
At Duty Cycle 50%: 1.55 mm-H2O
At Duty Cycle 100%: 3.0 mm-H2O |
|
| Lead Wire Pin Out | Pin1- (-)
Pin2- (+)
Pin3- (Techometer/Signal output)
Pin4- (PWM) |
|
| Cooling Performance VS. Airflow (Wind Tunnel Simulation) |  |
|
| Note | 1. Support CPU Power up to 160 Watts
2. Pre-print thermal compound Shin-Etsu G751
3. RoHS Compliance
4. Backplate is not included |
