 | | Product SKUs |  | | SYS-7048GR-TR | - SuperServer 7048GR-TR (Black)
|
| | | Motherboard | |
Super X10DRG-Q |
| | | Processor/Cache | | | CPU | - Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
- Dual Socket R3 (LGA 2011)
| | Cores / Cache | - Up to 18 Cores / Up to 45MB Cache
| | System Bus | | | Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| | | System Memory | | | Memory Capacity | - 16x 288-pin DDR4 DIMM slots
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
| | Memory Type | - 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
| | DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
|
| | | On-Board Devices | | | Chipset | - Intel® C612 Express chipset
| | SATA | - SATA3 (6Gbps); RAID 0, 1, 5, 10
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
| | Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
| | Video | |
| | | Input / Output | | | SATA | | | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 5x USB 3.0 ports (2 rear, 2 via header, 1 Type A)
- 4x USB 2.0 ports (2 rear, 2 via headers)
| | Audio | | | Video | | | Serial Port / Header | - 2x COM ports (1 rear, 1 Header)
| | Thunderbolt | |
| | | Expansion Slots | | | PCI-Express | - 4x PCI-E 3.0 x16 (double-width)
- 2x PCI-E 3.0 x8 (1 in x16 slot) support Thunderbolt 2.0 AOC
- 1x PCI-E 2.0 x4 (in x8)
|
| | | System BIOS | | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| | | | Chassis | | | Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit
| | Model | |
| | | Dimensions and Weight | | | Height | | | Width | | | Depth | | | Package | - 27" (H) x 13" (W) x 38" (D)
| | Weight | - Net Weight: 46 lbs (20.9 kg)
- Gross Weight: 62 lbs (21.8 kg)
| | Available Colors | |
| | | Front Panel | | | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat & Power Fail LED
| | Ports | |
| | | Drive Bays | | | Hot-swap | - 8x 3.5" Hot-swap SAS/SATA Drive Trays
| | Peripheral Bay(s) | - 3x 5.25" drive bays in storage module - rotates 90° for Rackmount
- 1x 3.5" fixed drive bay
|
| | | SAS / SATA Backplane | | | SAS / SATA Hard Drive Backplane with SES2 |
| | | System Cooling | | | Fans | - 4x 92x38mm 4-pin PWM Middle Cooling Fans
- 2x 80x38mm 4-pin PWM Rear Exhaust Fans
| | Heatsink | - 2x Active Heatsink with Optimal Fan Speed Control
|
| | | Power Supply with Digital Switching Control | | | 2000W Titanium Level (96%) High-efficiency Redundant Power Supplies | | Total Output Power | | | AC Input | - 100-127 V, 50-60 Hz
- 200-220 V, 50-60 Hz
- 220-230 V, 50-60 Hz
- 230-240 V, 50-60 Hz
| | +12V | - Max: 83.3A & Min: 0A (100Vac-127Vac)
- Max: 150A & Min: 0A (200Vac-220Vac)
- Max: 165A & Min: 0A (220Vac-230Vac)
- Max: 166.7A & Min: 0A (230Vac-240Vac)
| | 5V SB | | | Certification |   Titanium Level
[ Test Report ] |
| | | PC Health Monitoring | | | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
| | FAN | - Total of eight fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| | | Operating Environment / Compliance | | RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
Drivers & Utilities 
