SysKonnect's Gigabit Ethernet Server Adapter Specifications
SK-NET GE-T
Bus interface PCI Bus: 64bit/66MHz and 32bit/33MHz autosensing for all combinations Signaling voltage: 3.3V and 5 V compatible, PCI Hot Plug (OS dependent)
Network interface IEEE 802.3ab compatible
1000Base-T (RJ-45 connectors)
Dual link version with redundant link
Auto-negotiation, full-duplex and half-duplex support
LAN controller Xaqti XMAC II
RAM 1 MB
VPD memory 512 Byte PCI Vital Product Data (VPD)
Flash EEPROM 128 KB
I/O addresses Automatic from PCI Plug and Play
Interrupts PCI INT A, Interrupt Moderation Timer with 16ns resolution
DMA Automatic, dependent on PCI slot (busmaster)
Parity Parity generation and checking on all data paths
Power mangement APM (Advanced Power Management) compatible
EMC CE, FCC Class B, C-Tick,VCCI
Safety standards CSA, CB, CE, UL
Temperatures 10°C to 50°C (operating)
1oC to 60oC (storage)
Humidity
(non-condensing) 10% to 80% (operating); 10% to 80% (storage)
Dimensions SK-NET GE-T:
4.9 x 7.3 inches (126 mm x 186 mm)
SK-NET GE-T dual link: 5.0 x 13.8 inches (127 mm x 352 mm)
Power consumption SK-NET GE-T:
max. 14 W
SK-NET GE-T dual link: max. 24,8 W
Notes · RLMT (Redundant Link Management Technology) for configuration of redundant links
· Parity monitoring on all data paths
· Sensors for temperature and voltage monitoring
· TCP, UDP and IP checksum generation and checking in ASIC
· Jumbo Frame support
Standards Compliance
Standards Compliance
IEEE 802.3z or IEEE 802.3ab Gigabit Ethernet standards
IEEE 802.3x with flow control/auto-negotiation
IEEE 802.1p class of services
IEEE 802.1q VLAN Tagging
IEEE 802.3ac Frame Extensions for VLAN Tagging
IEEE 802.3ad Link Aggregation
PCI specification Rev. 2.1 with extensions in accordance with Rev. 2.2作者: Amulet 时间: 2007-12-19 20:38
这卡热不死你Y的,下午发消息中奖了没? :w00t):作者: XCPU 时间: 2007-12-19 20:41