默认就不亮的话 应该是某些设置还有点商榷 继续努力把：）作者: 杨三疯 时间: 2008-7-30 16:30
我被2启搞到上下喷血~~~~~~~~~~~~作者: doom4 时间: 2008-7-30 17:10
2启有时侯是电源储备功率不够或者兼容性有问题。我原来用绿宝就遇到，后来换了酷冷战斧500W，什么问题都没了，配置完全一样作者: stonecold 时间: 2008-7-30 17:23
AI Overclock tuner: Manual
CPU Ratio Setting: 8
FSB Strap to North Bridge: auto
FSB Frequency: 500
PCI-E Frequency: 100
DRAM Frequency: 1000
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: Manual
1st Information :
CAS# Latency: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Precharge: 5
DRAM RAS# Activate to Precharge: 15
RAS# to RAS# Delay : A
Row Refresh Cycle Time: A
Write Recovery Time:A
Read to Precharge Time: A
2nd Information :
READ to WRITE Delay (S/D): A
Write to Read Delay (S): A
WRITE to READ Delay (D): A
READ to READ Delay (S): A
READ to READ Delay (D): A
WRITE to WRITE Delay (S): A
WRITE to WRITE Delay (D): A
3rd Information :
WRITE to PRE Delay: A
READ to PRE Delay: A
PRE to PRE Delay: A
ALL PRE to ACT Delay: A
ALL PRE to REF Delay: A
DRAM Static Read Control: DISABLED
RAM Read Training: DISABLED
EM. OC Charger: E
AI Clock Twister: M
AI Transaction Booster: auto
CPU GTL Voltage Reference (0/2): AUTO
CPU GTL Voltage Reference (1/3): AUTO
CPU PLL Voltage: 1.52V
FSB Termination Voltage: 1.26V
DRAM Voltage: 2v
NB Voltage: 1.28v
NB GTL Reference: AUTO
SBridge Voltage: 1.10V
PCIE SATA Voltage: 1.50V
Load Line Calibration: disabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew : 200ps(这个值每个U都不同，建议300以下)
NB Clock Skew : 100ps
Advance CPU Settings
CPU Ratio Setting: 9
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Intel® Virtualization Tech: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled作者: xiaofeng_000 时间: 2008-7-30 18:45
不知道为什么 我从来没遇到过这个问题 q6600 390*9 8G内存 4：5
只是bios恢复过2次 后来就没问题了
p5q-e作者: xxxyyy 时间: 2008-7-31 01:18
提示: 作者被禁止或删除 内容自动屏蔽作者: OCbaichi 时间: 2008-7-31 01:26
这就是所谓奢侈的烦恼了吧,我等无米之人羡慕不已呀.
