POPPUR爱换

 找回密码
 注册

QQ登录

只需一步,快速开始

手机号码,快捷登录

搜索
查看: 2238|回复: 16
打印 上一主题 下一主题

AMD新架构要等到2011年,fusion也延期到2011年

[复制链接]
跳转到指定楼层
1#
发表于 2008-11-15 01:15 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
45nm Phenom?
It's called the Phenom II and you Get It Next Year

Phenom II will be available in a couple of versions. The Phenom II X4 is a quad-core part initially released for the Socket-AM2+ platform, but eventually it will be a Socket-AM3 part with DDR3 support. The Deneb core is a Phenom II X4 with 8MB of L3 cache and the Propos version has a 2MB cache. Both of these cores have integrated DDR2 memory controllers, with a transition to DDR3 sometime in 2010.



Caspian is a dual-core version of the 45nm Phenom II with a 2MB cache, Champlain hits in 2010 and is a quad-core Phenom II with DDR3 for the mainstream notebook market. Geneva is a lower powered 45nm dual-core product, presumably Phenom II as well, due out in 2010 for ultra portables.
AMD also revealed a bit of its 2011 roadmap; these products are based on the first new architecture since Phenom - called Bulldozer. I talked about Bulldozer a while ago but details have been scarce since then.

In 2011 AMD expects to be at 32nm with its Orochi, Llano, and Ontario cores. Orochi will be the new high-end enthusiast desktop product with more than four cores, more than 8MB of cache, and an integrated DDR3 memory controller. Remember from the server roadmap that in 2011 AMD will have four DDR3 memory channels on its server products so I'd expect at least a 3-channel DDR3 controller here.

Llano is the mainstream 32nm part with four cores, 4MB of cache, DDR3 memory controllers, and an on-die GPU. Note that this is a delayed introduction of the first CPU/GPU fusion product, originally scheduled for 2009. AMD stated that the plans for the first CPU/GPU products got pushed back simply because the 45nm designs weren't compelling enough. The dies get small enough at 32nm that you can actually offer tangible benefits. Note that this also means that the first single-package CPU/GPU will actually come from Intel in 2009 with a Nehalem derived part and not from AMD.

Finally we've got Ontario, which is a very low power core based on AMD's upcoming Bobcat core. It's a dual-core product with 1MB of cache, on-die GPU, and a DDR3 memory controller. We know even less about Bobcat, but I did write about it over a year ago.
2#
发表于 2008-11-15 02:50 | 只看该作者
希望





















到时候还能看到amd
回复 支持 反对

使用道具 举报

3#
发表于 2008-11-15 02:56 | 只看该作者
怎么熬啊
回复 支持 反对

使用道具 举报

4#
发表于 2008-11-15 02:57 | 只看该作者
谁都有难熬的时候

还是希望AMD顶住
回复 支持 反对

使用道具 举报

5#
发表于 2008-11-15 09:19 | 只看该作者
Intel又要抄袭AMD还没发布的产品了。
回复 支持 反对

使用道具 举报

6#
发表于 2008-11-15 09:32 | 只看该作者
大家早上好啊  好久没来咯  今天来看看的  忽忽……!·



























暴力召唤师
仙遁
回复 支持 反对

使用道具 举报

7#
发表于 2008-11-15 09:34 | 只看该作者
AMD再缝再补就快倒下了,顶住啊~~~
回复 支持 反对

使用道具 举报

8#
发表于 2008-11-15 19:15 | 只看该作者
一定要顶住啊
回复 支持 反对

使用道具 举报

9#
发表于 2008-11-15 19:46 | 只看该作者
偶比较理解AMD,AMD一直以来都是靠买人家的技术,自己缝缝补补改改用的,这两年买不到新架构新技术了,只能在K8的架构上不停东改西改,换着名称推产品了
回复 支持 反对

使用道具 举报

10#
发表于 2008-11-15 20:58 | 只看该作者
至少AMD目前在显卡方面还是胜出的
处理器方面还是要等的,希望AMD能再次起来
回复 支持 反对

使用道具 举报

11#
发表于 2008-11-16 01:14 | 只看该作者
晕了,我的推土机呢?
回复 支持 反对

使用道具 举报

12#
发表于 2008-11-16 13:52 | 只看该作者
itany 同学工作真认真啊,很卖力啊。

有兴趣的朋友可以搜索一下itany同学的工作成绩
回复 支持 反对

使用道具 举报

13#
发表于 2008-11-16 14:27 | 只看该作者
该死的活跃度
回复 支持 反对

使用道具 举报

14#
发表于 2008-11-17 00:18 | 只看该作者
能顺利量产45纳米 也就足够还能撑个几年了...

日子那是肯定比较的难过 很难过
回复 支持 反对

使用道具 举报

15#
发表于 2008-11-17 16:36 | 只看该作者
black swift算不算 fushion?
回复 支持 反对

使用道具 举报

16#
发表于 2008-11-17 22:26 | 只看该作者
悬了。。
回复 支持 反对

使用道具 举报

17#
发表于 2008-11-18 12:01 | 只看该作者
那个只是第一代的融合技术了 现在上四核等 真正把GPU集成到CPU里再说了
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

广告投放或合作|网站地图|处罚通告|

GMT+8, 2025-8-21 14:05

Powered by Discuz! X3.4

© 2001-2017 POPPUR.

快速回复 返回顶部 返回列表