新买WRH54G，PPPoE拨号有点问题，来请教一下

lionwong

昨天到手，加邮费215大元。感觉还行，我也就一般用，就连2个本。

因为宽带不是包月的，用的手动连接，用路由在web界面拨号，第一次连接可以顺利拨上，中间不上网时断开，再拨号会提示“不能从PPPoE服务器获得IP地址”然后再次连接拨号会成功。。现在每次断开后再连接都得失败一次再拨。。想知道这个问题是怎么回事，怎么解决，固件是官方的: 1.01.05。


ADSL猫是电信送的华为MT800，不过感觉和其他的没关系，要不然怎么能间隔地拨上呢。。高手来指教下

lionwong

谢谢，我就是在web界面里断开的，可能是我间隔时间较短的原因，pppoe穿越方便是方便，可是不能2人一起用了

tootoo

不知道{sweat:]

lionwong

我也搞不清，但我用pppoe穿越拨号，随断随连也能连上。。郁闷

lionwong

看了下日志
成功时是这样的：
[Nov 21 17:53:39] (PPPoE) Sending PADI.
[Nov 21 17:53:39] (PPPoE) Received PADO.
[Nov 21 17:53:39] (PPPoE) Sending PADR.
[Nov 21 17:53:39] (PPPoE) Received PADS.
[Nov 21 17:53:39] (PPPoE) Sending LCP Configuration-Request.
[Nov 21 17:53:39] (PPPoE) Received LCP Configuration-Request.
[Nov 21 17:53:39] (PPPoE) Sending LCP Configuration-Ack.
[Nov 21 17:53:39] (PPPoE) Received LCP Configuration-Ack.
[Nov 21 17:53:39] (PPPoE) Sending PAP Authenticate-Request.
[Nov 21 17:53:40] (PPPoE) PAP authentication succeeded.
[Nov 21 17:53:40] (PPPoE) Sending IPCP Configuration-Request.
[Nov 21 17:53:40] (PPPoE) Received IPCP Configuration-Request.
[Nov 21 17:53:40] (PPPoE) Sending IPCP Configuration-Ack.
[Nov 21 17:53:40] (PPPoE) Received IPCP Configuration-Nak.
[Nov 21 17:53:40] (PPPoE) Sending IPCP Configuration-Request.
[Nov 21 17:53:40] (PPPoE) Received IPCP Configuration-Ack.
[Nov 21 17:53:40] (PPPoE) Local IP address 60.1xxxxxx
[Nov 21 17:53:40] (PPPoE) Remote IP address 60.1xxxxxx

失败时是：
[Nov 21 17:55:03] (PPPoE) Sending PADI.
[Nov 21 17:55:03] (PPPoE) Sending PADT.

谁来分析下。。

tonychs

如果遇到这种情况断开路由器电源一分钟再开机呢？
感觉路由器的断开连接和软件的断开连接是不是不太一样？