daniel_k再更新Live!系列驱动！SB Live! series Support Pack 2.0(04/30/2010)

llzero

--本人SB0100在win7下已测试正常，没有爆音，就是声音小一点，安装完默认已经是5.1声道，如果播放音乐后置没有声音的话，可以打开播放设备-扬声器，点属性，点“Enhancements”选项卡，在下面把“Enable Speaker Fill” 勾上就可以前后置同时有声音了。如果看5.1声道的电影把这个勾取消了吧。。
. G* Y* C. {( p+ j- x SB Live! series Support Pack 2.0 (04/30/201
' X0 j) O/ [- s+ u" V$ V5 n0)

. r, z# _# O4 I1 g

This software/driver pack is unofficial, not supported by Creative Labs.

Use it at your own risk.

Supports any model of the following Sound Blaster cards (based on Emu10kx DSP):

- Live! (4.1) - all models
- Live! 5.1 - all models
/ d6 w- r. ?- N$ |0 [- PCI 512
: R  n& B" K% o0 D
Host-based Live! 24-bit card is not supported
, R& E6 @5 Q9 R

3 o/ G& u, t- GOperating systems supported: 32-bit and 64-bit editions of Windows 7  / Vista SP1 & SP2 / XP SP3
8 M! X# E2 J. e# P/ u' e

WARNING: The included driver supports up to 2Gb of RAM on Windows 7 / Vista
' P# q$ ?5 A& f$ Z* P, S  I
) L, C4 w3 B+ A" |Applies to both 32-bit and 64-bit editions of Windows 7 / Vista.

In case more memory is installed, you will experience sound issues and your system will crash randomly.

32-bit and 64-bit editions of Windows XP are not affected.
3 a) ?$ \3 y$ j9 p6 B" P$ E: V

6 v4 {& }2 F# W; x8 ?0 ^0 GIncluded in the pack:
  m  |! r. e1 J; t
- Live! series driver 2.18.0017.7 for Windows 7 / Vista
- Live! series driver 2.09.0016.3 for Windows XP
- Audio Console 1.21.00 (Windows 7 / Vista only)
! H# {6 n/ K: Y" r- SoundFont Bank Manager 3.21.02
- Surround Mixer 2.00.55 (Windows XP only)
8 G* }) U( B; T( ]" E5 C5 [




What's new:
, K( ]/ O( `9 s- `0 Y! k
- Fixed distortion in 2/2.1 Speakers mode on Windows 7/Vista.
/ \: x9 G% s/ D' U  E/ x
- EAX effects, Advanced EQ and Special FX now work on Windows 7/Vista in 2/2.1 Speakers mode.
4 |4 c7 Z) s9 T1 s& @4 y; w! e, S) D3 M
# z/ l9 D0 U! F4 M1 Q( l- Workarounds for low volume on Windows 7/Vista (for 2/2.1 Speakers mode ONLY).
/ V5 u1 g% M5 o1 W
- Added Creative Software Synthesizer for Windows XP 32-bit and 64-bit.

- Fully working driver for Windows XP x64 with 4GB or more RAM installed (except for HW Synthesizer, must use the Software based).
7 s4 x8 e* J' G) F! H- C2 m& t

& z3 B& X9 u( w* H3 p( `/ N2 ~4 U8 ]
. w, }$ u7 o) m: g6 O7 a


Release Notes:

' G/ _. w% p+ Q$ h7 L

9 R; ?  @9 Z) C5 zDo not disable nor remove this driver in the Normal mode of Windows 7/Vista

There is a bug in this driver that causes a stop error in CTOSS2K.SYS.
Just restart Windows in Safe mode before disabling or uninstalling the driver.

) O6 y+ ~. ~" H" ?

* w' D. K: a3 q. P' E& ^Ignore any Found New Hardware dialog on Windows XP
" @" o( {; q8 G6 {- @' I0 Y% W
To ensure Pro-Aper installation of "Creative SoundFont Synthesizer", ignore this dialog. It will close automatically as soon as you click on the "Install this driver software anyway" button to install the driver.

' P8 L5 {" @! i
/ h" L: w4 P1 v
Windows Security warning during driver installation

When prompted with: "Windows can't verify the publisher of this driver software", choose "Install this driver software anyway".


( m, Q# i  q9 z1 h$ b- R* M
Hardware Synthesizer doesn't work on Windows XP x64 with 4GB or more RAM

, m) ?2 L* F- v1 WThis occurs due to a memory addressing issue that cannot be fixed.

+ I$ U9 _7 t0 h$ KSimply use the "Creative SoundFont Synthesizer", that has the same functionality but uses software processing.

+ Z2 ^! U1 b+ I3 b6 c. e5 ^0 M# V

; q4 h7 B, D: VCreative Software Synthesizer is mute on Windows XP with more than 2GB of RAM
- Q5 A8 W2 Y) K& k( W9 a
For both 32-bit and 64-bit editions of Windows XP, simply change the cache mode or change the maximum amount of memory for Soundfonts.
5 B8 a) h3 v" c
2 M/ Y. V; i! S: d
) U0 U: |4 @* R: i! s
1 r- x# k2 c: j4 z6 nFix for low volume on Windows 7/Vista (only for 2/2.1 Speakers or Headphones)
+ i" x$ B5 M. d) L0 u) @+ }
(*) If the current speaker configuration is 4.1 or 5.1 Speakers, first change it to 2/2.1 mode, then finally change it to Headphones, otherwise the effects won't work.
+ g8 b3 ]- J9 s! E/ X0 o0 a* @
Facts about the methods:
$ S  I) D' k/ D- U1 }# ?+ ^# R
- "Normalizer" gives the highest volume, but mutes MIDI.
" E. l& s. ]' g* E$ I- "Flat" gives an average volume increase, doesn't have any issues and you can tweak the EQ if you want to.
. J* c0 x' z8 }& c  W% A( i- Both methods use the Emu10k1 DSP's hardware engine, not relying on your CPU.

% S, V4 O# ~3 D$ S1 I$ c' U2 _
! W0 i/ b* R! C. y! a$ Y' c  `6 Z5 r8 C2 p1) Creating an EQ preset named "Normalizer"
/ Y6 F; P0 w2 _4 [+ h. U
8 H/ q5 ?5 i: j5 ?& S/ L- Open "Creative EAX Settings".
- Select EQ and choose "(No effect)"
- Type in a new name "Normalizer" (or whatever you like)
' C+ ?0 B7 ~- [- Select "Original sound" and set the amount to the minimum or "Infinity dB".
- Add a "Normalizer" effect by clicking the "Add..." button.
- Make sure the Normalizer amount is set to its maximum (0.0 dB).
! j7 _, j; k  u2 f- Click on the "Save environment" button.
5 z: S) E1 M2 B' Z/ n
+ ]1 t5 n% O) v
/ `5 X5 S1 v3 C, S' n5 w2) Creating an EQ preset named "Flat"

- Open "Creative EAX Settings".
- Select EQ and choose "(No effect)"
, c6 j0 l9 b7 x$ n: b# b0 C- Type in a new name "Flat" (or whatever you like)
- Add a "Parametric Equalizer" effect by clicking the "Add..." button.
- Set the "Type" to "Creative Equalizer 4".
- Make sure the Parametric Equalizer amount is set to its maximum (0.0 dB).
- Click on the "Save environment" button.

' n+ S. A& B7 Z/ G" |" a

Improving sound experience on Windows 7/Vista

When using the Directsound and Wave Out interfaces you may experience sound cutouts during heavy I/O operations.
) l2 j) @0 q# B: [  F. U
OpenAL or WASAPI are the recommended interfaces as both do direct hardware access and are not affected by the issues previously referred.


+ |7 g: {; r1 c7 q4 I0 [" O
Built-in Decoder and SPDIF Out on Windows 7/Vista
$ h6 B( w; w( L/ C. g( j
The built-in decoder is not supported. Use a third-party software.
SPDIF Out is not available on Windows 7/Vista.

# D& @1 ^; d. u0 S
# s6 n' n9 N  y) f+ E2 b
: w0 v7 A& e: L: rEAX effects, Advanced EQ and Special FX on Windows 7/Vista
4 C% V8 |$ K  N. I5 t
: [2 U8 x+ h: m) m5 v/ D( SFor applications supporting OpenAL, the effects work in any speaker configuration.
# B2 D4 K0 b# @( o8 p6 v8 U
For applications supporting WaveOut or Directsound, the effects only work when the speaker configuration is 2/2.1 Speakers or Headphones (*).
) H" k* o4 S( o( B3 g  e$ H
2 k: g2 R) h9 ?9 h(*) If the current speaker configuration is 4.1 or 5.1 Speakers, first change it to 2/2.1 mode, then finally change it to Headphones, otherwise the effects won't work.
# G) B  B8 M  F7 F# w1 P

/ K" U; Y! B9 D/ ]- i% f+ u
: q. V; c  a8 @' zThere is echo when playing audio on Windows 7/Vista
: f  p9 {7 J2 U
$ W# |& c* }' rChoose "EAX Games - Disable Effects" in the Special FX tab of Audio Console.
  Q* [9 d4 K+ h, x$ ^: b
" `  h. ^+ G' Y& N0 u7 |8 n8 b

There is no sound on Windows 7/Vista in 4.1/5.1 Speakers mode

Disable Advanced EQ or Special FX selecting "No effects" in the EAX tab of Audio Console.
9 j) {, i  V& O8 D2 i


After changing speaker mode there is no sound on Windows 7/Vista

/ f/ }$ ~0 s# fMute and unmute the main volume control.


7 [6 `7 B, L2 V3 b2 `+ p/ [/ m
0 h0 C6 B' E4 @+ i! l, E9 j, dMixer levels are reset when the speaker configuration is changed on Windows 7/Vista
( H/ T" }& i8 w) ]# ]0 U
The volume levels of playback and record devices are reset everytime the speaker configuration is changed. You need to readjust them manually.

7 ~8 m* Z6 `7 I$ |, W+ U( [

" }7 B2 [. A  E8 s" U( [) CSound enhancements on Windows 7 / Vista
; |# u- N& y. x8 E) b( |
4 t$ h: c: G; A% b5 Y+ ~6 DThe following sound effects are available:
4 q9 a6 b9 W2 t# c
. y! c3 S  i4 i# ~4 V- Bass Management (Bass redirection and Bass Boost)
: Z9 U2 Y0 g2 W9 A5 C
8 n/ t2 x, V6 C# T- Swap LFE/Center

' A& C" u) \. q) v, _- Environmental Effects
% p% K0 ]* s0 |9 M5 G  K( O
- Loudness Equalization
3 K3 P5 n2 H: ]/ |# F
7 b, J7 v) U5 F- Virtual Surround
( f9 B0 Z' a9 Y6 \  v; }! g
- Equalizer (10 band)

( y. F; }, V0 D% L* Z# ^- Room Correction
* z0 U4 `6 ?1 g+ @0 D% k" O3 o

Windows MIDI Device Configuration Utility
5 H. m: |' E, u* h& w
9 }( z2 l9 [9 A. g( x+ aUse this utility to change the MIDI playback device for 32-bit and 64-bit applications on Windows 7/Vista.
1 j/ Z  m5 q$ m' O1 j1 b! m. U



Download:
' ~/ F" {( m9 L# e9 b" }8 V( C* S+ b
8 ]4 O. U( s. c, _, {; A' @Filename: SBLive_SupportPack_2_0.exe
% c' t$ f- r9 d. vFile size: 58.4 MB
; M" \) _0 y; ^) jCRC32 hash: 2016FDB5
; f0 T/ e( Y& _* Q4 h) RSHA-1 hash: 6DF42CD315349BC81B96B9190DB51BB87293BAC4
9 C5 d# [( J' D7 Z" B
" @8 F' B4 g; [& }; ^) JTo verify the file hashes, I recommend HashTab.

Mirrors: Hotfile
http://hotfile.com/dl/42939423/7084b94/SBLive_SupportPack_2_0.exe.html

Mirror

. _9 L9 K+ s! n; F7 F& qhttp://www.mediafire.com/file/gmgntj2mgq2/SBLive_S
8 v3 J9 d& e8 H, A( R2 j+ {) supportPack_2_0.exe
http://www.megaupload.com/?d=6VIQBIBS
7 P4 z/ T" q9 A9 C. w( |) ]http://www.multiupload.com/LHFSDVF345
) ~( l. D8 t! `8 a& iAll files are property of Creative Technology Ltd, unless otherwise noted.

bang9975

没什么实际更新。