LSI MegaRAID SAS 8708ELP / 8708EM2 / 8888ELP 新版固件發佈 - 10/30/2010

idolclub

************************************
LSI Logic MegaRAID Firmware Release
************************************
Release date: 10/29/10
======================
Supported Controllers:
======================
MegaRAID SAS 8704ELP
MegaRAID SAS 8704EM2
MegaRAID SAS 8708ELP
MegaRAID SAS 8708EM2
MegaRAID SAS 8880EM2
MegaRAID SAS 8888ELP

Component:
=========
SAS MegaRAID Firmware Release for MegaRAID 1078 Controllers
Release date: 10/29/10

Version Numbers:
===============
Current Firmware Package:      11.0.1-0036 (EF-P23)
Current Package Details:       APP-1.40.232-1007_BB-1.00.00.01-0011_BIOS-2.07.00_WEBBIOS-2.2-21-e_13-Rel
         
Previous Firmware Package:     11.0.1-0034 (EF-P21)
Previous Package Details:      APP-1.40.212-0971_BB-1.00.00.01-0011_BIOS-2.07.00_WEBBIOS-2.2-21-e_13-Rel

Bug Fixes and Enhancements:
===========================
Firmware:
LSIP200097088  (DFCT)  PL is not returning correct data for CONFIG_PAGE_SAS_PHY_0.
LSIP200095503  (DFCT)  Clear Battery Unqualified Relearn Counter when Battery is Replaced
LSIP200089942  (DFCT)  EF patch 21 : FW Fatal Error happens when consecutive Medium Errors are found in Degraded SATA RAID5, 6.
LSIP200064308  (CR)  BBU AEN Change for 3G SAS controllers

Installation:
=============
Use MegaCLI to flash the SAS controllers.  MegaCLI can be downloaded from the support and download
section of www.lsi.com
Command syntax:  MegaCli -adpfwflash -f mr1078fw.rom -a0

Firmware Download：
http://www.lsi.com/DistributionS ... gr.aspx?asset=55997

Remark：
請注意，此Firmware只適用於LSI MegaRAID SAS 8704ELP、8708ELP、8888ELP等LSI 1078 Base的Raid Card，LSI 8308ELP、8344ELP等LSI 1068 Base的Raid Card絕對不能使用。

aliguagua

6i也能用吧

per1-q1222

可以強制刷新..
但是這樣會變成Pre-boot的BIOS介面會進不去..
算是一個大壞...

stonecold

没所谓啦，我的6I 一直用最新的LSI FW，也没什么不妥，管理方面就用LSI 的 MEGARAID MANAGER就行了

wmfwmf

回复 idolclub 的帖子

有什么新功能吗？

per1-q1222

khalil 发表于 2010-10-30 17:29
请问9211有更新？

還早還早..

idolclub

wmfwmf 发表于 2010-10-30 12:52
回复 idolclub 的帖子

有什么新功能吗？

這版主要是加強穩定性