HD Audio大家接好了么?

brunolee

所有的主板提供的都是AC 97前面板接线柱，怎么都照不到AC 97和HD Audio的对应接法，主板说明书上也没有说明AC 97的Front Panel怎么接HD Audio的主板，遂在Intel里挖了一下，copy个表格出来，大家看看自己是不是接对了。
+ K: Q; c7 Q2 c, P# _: f+ s

For Intel® High Definition Front Panel Audio
Pin	Signal Name	Description
1	PORT 1L	Analog Port 1 - left channel (Microphone)
2	GND	Ground
3	PORT 1R	Analog Port 1 - right channel (Microphone)
4	PRESENCE#	Active low signal that signals BIOS that an Intel® HD Audio dongle is connected to the analog header. PRESENCE# = 0 when an Intel® HD Audio dongle is connected
5	PORT 2R	Analog Port 2 - right channel (Headphone)
6	SENSE1_RETURN	Jack detection return for front panel (JACK1)
7	SENSE_SEND	Jack detection sense line from the Intel® HD Audio CODEC jack detection resistor network
8	KEY	Connector key
9	PORT 2L	Analog Port 2 - left channel (Headphone)
10	SENSE2_RETURN	Jack detection return for front panel (JACK2)

$ q: H% ~, h8 n: h, n1 }
" I+ @# {# h! i2 \7 h# O& C! {7 ]

For AC-97 Front Panel Audio
Pin	Signal Name	Description
1	MIC	Front panel microphone input signal (biased when supporting stereo microphone)
2	AUD_GND	Ground used by analog
3	MIC_BIAS	Microphone power / additional MIC input for stereo microphone support
4	AUD_GND	Ground used by analog audio circuits
5	FP_OUT_R	Right channel audio signal to front panel (headphone drive capable)
6	FP_RETURN_R	Right channel audio signal return from front panel (when headphones unplugged)
7	AUD_5V	Filtered +5 V used by analog audio circuits
8	KEY	No pin
9	FP_OUT_L	Left channel audio signal to front panel (headphone drive capable)
10	FP_RETURN_L	Left channel audio signal return from front panel (when headphones unplugged)