Marvell Yukon 88E8053 PCI-E频繁丢包，如何解决

信购数码

我是AOPEN的915G主板，Marvell Yukon 88E8053 PCI-E板载网卡。连接的是E-TEK TD2001MODEM，现在设置成10M全双工，但是频繁丢包，请问怎么解决。100M全双工也是如此。千M的网卡好象是有点这个问题？

Microsoft Windows XP [版本 5.1.2600]
(C) 版权所有 1985-2001 Microsoft Corp.

C:Documents and Settingslikang>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Request timed out.
Reply from 192.168.1.1: bytes=32 time<1ms TTL=30
Request timed out.
Reply from 192.168.1.1: bytes=32 time<1ms TTL=30

Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms

C:Documents and Settingslikang>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time<1ms TTL=30
Reply from 192.168.1.1: bytes=32 time=1ms TTL=30
Reply from 192.168.1.1: bytes=32 time=35ms TTL=30
Reply from 192.168.1.1: bytes=32 time<1ms TTL=30

Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 35ms, Average = 9ms

C:Documents and Settingslikang>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Reply from 192.168.1.1: bytes=32 time<1ms TTL=30

Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms

C:Documents and Settingslikang>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time<1ms TTL=30
Request timed out.
Reply from 192.168.1.1: bytes=32 time<1ms TTL=30
Reply from 192.168.1.1: bytes=32 time<1ms TTL=30

Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 3, Lost = 1 (25% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms

CCTV_1234

买块洋垃圾559先用上，如果不丢了，就肯定集成的坏了，还丢的话，就是猫的问题。
915的话，集成要是出毛病了就不要费心去想了，独立的用着吧

信购数码

我用独立网卡558的话很正常的速度。估计是板载网卡水平不行，还谈不上损坏，但是这个卡做的质量很差是肯定的。

丁蟹

也不一定就是板子差。主机到Modem的网线更换过没有？以前见过电信配的乐色网线，Modem无论到什么网卡（intel 82559、Realtek 8139），都要把网卡设置成10M半双工才稳定的

CCTV_1234

也不一定就是板子差。主机到Modem的网线更换过没有？以前见过电信配的乐色网线，Modem无论到什么网卡（intel 82559、Realtek 8139），都要把网卡设置成10M半双工才稳定的
丁蟹 发表于 2009-5-29 18:52

有道理

信购数码

也不一定就是板子差。主机到Modem的网线更换过没有？以前见过电信配的乐色网线，Modem无论到什么网卡（intel 82559、Realtek 8139），都要把网卡设置成10M半双工才稳定的
丁蟹 发表于 2009-5-29 18:52

网线我换过还是一样。另外我有两个MODEM，网卡也换了。估计这个板载确实比较垃圾，可惜这个是小板PCI槽我还留着有用的。

good9

非常肯定地告诉楼主：E-TEK TD2001MODEM支持的只是10M半双工。

xinbai

这个网卡挺好的，楼主还是换modem比较靠谱，TD2001夏天相当热

信购数码

这个网卡挺好的，楼主还是换modem比较靠谱，TD2001夏天相当热
xinbai 发表于 2009-5-30 13:24

看我现在用的，INTEL原装货，速度已经很OK了。MODEM可是铝合金外壳的，质量非常好，我用两年了都没事。

设备描述    类型
Intel PRO/100 S Management Adapter (PHY: Intel 82559 Internal)    PCI
Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller    PCI

charles12

一切为了活跃度,帮顶