LSI 2108/1078最新驅動程式(4.31.1.xx；07-SEP-10)

per1-q1222

有更新
會安心...

http://www.lsi.com/storage_home/ ... i/index.html#Driver
Release Date: 9/07/10
======================

Supported Controllers
==================

MegaRAID SAS 9240-4i
MegaRAID SAS 9240-8i
MegaRAID SAS 9260-4i
MegaRAID SAS 9260-8i
MegaRAID SAS 9260DE-8i
MegaRAID SAS 9261-8i
MegaRAID SAS 9280-4i4e
MegaRAID SAS 9280-8e
MegaRAID SAS 9280DE-8e
MegaRAID SAS 9280-24i4e
MegaRAID SAS 9280-16i4e
MegaRAID SAS 9260-16i
MegaRAID SAS 8704ELP
MegaRAID SAS 8704EM2
MegaRAID SAS 8708ELP
MegaRAID SAS 8708EM2
MegaRAID SAS 8880EM2
MegaRAID SAS 8888ELP



Bug Fixes/Enhancements:
=======================
LSIP200075924 (auto4comp HWR_SAS_Driver_Win_LSI) support for SAS2004 "spitfire"
LSIP200083754 iMR card hits to Megamon by performing OCR while IO is running on R5 VD
LSIP200084417 iMR card hits to Megamon by performing OCR while IO is running on SATA R1 VD
LSIP200085325 XP-64 installation issue.
LSIP200083252 iMR card hits to Megamon by performing OCR while IO is running on VD
LSIP200083356 OCR support for iMr
LSIP200082034 Perfmon data is not collected for specified time interval
LSIP200055003 MSM becomes unresponsive when one of path in multi-paths configuration is removed and restored.
LSIP200083375 PC id addition
LSIP200083429 Remove PNP IDs from Windows Driver
LSIP200049568 Implement mechanism for FW to obtain RAID driver version and provide in API

stonecold

请问怎么改那个DELL 6I 能载入 8888ELP的驱动啊？

per1-q1222

请问怎么改那个DELL 6I 能载入 8888ELP的驱动啊？
stonecold 发表于 2010-9-8 11:31

閣下真要硬上???...

stonecold

閣下真要硬上???...
per1-q1222 发表于 2010-9-8 11:55

DELL 那个驱动是09年3月的，换新驱动能除BUG嘛，哈

per1-q1222

你先用強制安裝方式硬上看看..
不行就要修改subsystem ID部分...

stonecold

你先用強制安裝方式硬上看看..
不行就要修改subsystem ID部分...
per1-q1222 发表于 2010-9-8 13:19

早试了硬上驱动，不行，会提示 没有包含设备的兼容软件驱动程序的，VISTA年代就这样了，我现在的6I FW也是刷LSI的，哈

per1-q1222

早试了硬上驱动，不行，会提示 没有包含设备的兼容软件驱动程序的，VISTA年代就这样了，我现在的6I F ...
stonecold 发表于 2010-9-8 13:30

只能嘗試修改INF文件..

stonecold

在原来的 8888ELP INF 修改了4处，1F0C1028是6I 的 SUBSYS号码：
1ExcludeFromSelect = PCIVEN_1000&DEV_0060&SUBSYS_1F0C1028
2
%mraidsas8888elp.DeviceDesc% = megasas_Inst, PCIVEN_1000&DEV_0060&SUBSYS_1F0C1028

3
HKLM,SYSTEMCurrentControlSetControlCriticalDeviceDataBasepci#ven_1000&dev_0060&subsys_1F0C1028,ClassGUID,,%ClassGUID%

4 HKLM,SYSTEMCurrentControlSetControlCriticalDeviceDataBasepci#ven_1000&dev_0060&subsys_1F0C1028,Service,,%Service%

能装上驱动了，重启动后暂时正常

stonecold

那个型号名字貌似也可以修改的

per1-q1222

長相差不多 要下手容易
mraidsas8888elp.DeviceDesc = "LSI Logic MegaRAID SAS 8888ELP RAID Controller"
最後的這一段..
向作業系統註冊驅動程式的字串..

我個人傾向直接拿PERC的驅動程式
將資訊添加到LSI的inf文件..

stonecold

改好了， 写入相对提高了1点

per1-q1222

改好了， 写入相对提高了1点
stonecold 发表于 2010-9-8 14:04

perc6E.DeviceDesc = "DELL PERC 6/E Adapter RAID Controller"
perc6i.DeviceDesc = "DELL PERC 6/i Adapter RAID Controller"
perc6int.DeviceDesc = "DELL PERC 6/i Integrated RAID Controller"
cerc6i.DeviceDesc = "DELL CERC 6/i Integrated RAID Controller"

改成DELL一樣吧..