LSI MegaRAID SAS 9260-8i / 9261-8i / 9280-8e 最新版固件 - 04/21/2011

idolclub

************************************

LSI Corp. MegaRAID Firmware Release

************************************

Release date: 04/15/11

======================
Supported Controllers:
======================

MegaRAID SAS 9260-4i
MegaRAID SAS 9260-8i
MegaRAID SAS 9260DE-8i
MegaRAID SAS 9261-8i
MegaRAID SAS 9280-4i4e
MegaRAID SAS 9280-8e
MegaRAID SAS 9280DE-8e


Component:
=========
SAS MegaRAID Firmware Release for MegaRAID Controllers
Release date: 04/15/11


Version Numbers:       
===============
Current Firmware Package:    12.12.0-0048
Current Package Details:
APP-2.120.63-1242_BB-2.02.00.00-0000_BIOS-3.22.00_4.11.05.00_0x05020000_HII-_WEBBIOS-6.0-34-e_29-Rel_PCLI-04.04-01700008_BOOT-09.250.01.219_NVDATA-2.09.03-0013_2011_04_06
                             
Previous Firmware Package:   12.12.0-0045
Previous Package Details:
APP-2.120.33-1197_BB-2.02.00.00-0000_BIOS-3.21.00_4.11.05.00_0x05000000_HII-_WEBBIOS-6.0-34-e_29-Rel_PCLI-04.04-01700008_BOOT-01.250.04.219_NVDATA-2.09.03-0010_2011_02_25                 
                             
                                  
Bug Fixes and Enhancements:
===========================
Firmware:
=========
LSIP200167677 (CO) FW should issue STANDBY IMMEDIATE command to SATA disks during shutdown from OS
LSIP200164222 (CO) Add mfc paramater that enables prints of topology changes in fw serial port output
LSIP200158868 (DFCT) Power save mode hangs firmware causing driver to send kill adpter command
LSIP200170440 (DFCT) Firmware Incompleted Writes During Power Fail and Recovery
LSIP200153454 (DFCT) Firmware Incompleted Writes During Power Fail and Recovery
LSIP200125226 (DFCT) Red LED is lit on the next empty slot in an specific JBOD if the empy slot is immediatly after an array member
LSIP200153500 (DFCT) 9280-4i4e unable to import a Foreign Configuration
LSIP200166039 (DFCT) Label of Virtual Disk not provided by Drive Identify Command
LSIP200164210 (DFCT) Enable/disable of HDD cache doesn't appear to work
LSIP200167654 (DFCT) Potential data mismatch found when rebuild is progressing on R1 VD with media error under IO.
LSIP200166899 (DFCT) HWR: Fw log should indicate if a created/existing VD is already initialized
LSIP200157150 (DFCT) The new event can't be logged.
LSIP200156699 (DFCT) MegaCli -AdpAllInfo shows BBU is not supported for Castor cards
LSIP200146481 (DFCT) SMART predictive failure detection takes longer in 10M09 than 10M06
LSIP200146484 (DFCT) MR FW reports "Unexpected sense, Invalid field in CDB" for LOG SENSE command sent to Seagate drives
LSIP200169751 (DFCT) MegaRaid FW does not wait at post

BIOS:
========
HII changes only


Installation:
=============
Use MegaCLI to flash the SAS controllers.  MegaCLI can be downloaded from the support and download
section of www.lsi.com

Command syntax:  MegaCli -adpfwflash -f mr2108fw.rom -a0


Download:
http://www.lsi.com/DistributionS ... gr.aspx?asset=56956

connie_xlp

H700 512M RAM版本 刷了这个会怎样？

Xeagle

LSI固件更新很勤快啊

per1-q1222

connie_xlp 发表于 2011-4-21 20:25
H700 512M RAM版本 刷了这个会怎样？

無法使用WebBIOS....
也無法使用CTRL+R....

connie_xlp

per1-q1222 发表于 2011-4-22 01:40
無法使用WebBIOS....
也無法使用CTRL+R....

那怎么管理啊？

per1-q1222

connie_xlp 发表于 2011-4-22 07:44
那怎么管理啊？

因為NVSRAM有一部分是用來存放Persistent Area的相關出廠設定...
那一塊我們一般根本動不到....
由於DELL H700的BIOS是使用CTRL+R....
而LSI原廠則是使用CTRL+H...
如果你改刷LSI原廠F/W...
那結果就是無法進入WebBIOS....
你只能使用MSM或著MegaCLI管理....
以前都有相關的H700修改討論...
你可以去翻....

connie_xlp

只能进系统用MSM管理啊？

那其实也还好，至少可以管理了

原厂的FW是不是性能会好点？

我还可以再刷回来吗？

就在MSM里面升级FW么？

jimmyjin

可以刷回的， 我试过。