POPPUR爱换

 找回密码
 注册

QQ登录

只需一步,快速开始

手机号码,快捷登录

搜索
查看: 2180|回复: 2
打印 上一主题 下一主题

LSI MegaRAID SAS 9265-8i / 9285-8e 最新版固件 - 04/21/2011

[复制链接]
跳转到指定楼层
1#
发表于 2011-4-21 03:06 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
************************************

LSI Corp. MegaRAID Firmware Release

************************************

Release date: 04/15/2011

======================
Supported Controllers:
======================

MegaRAID SAS 9265-8i
MegaRAID SAS 9285-8e


Component:
=========
SAS MegaRAID Firmware Release for MegaRAID Controllers
Release date: 04/15/2011


Version Numbers:       
===============
Current Firmware Package:    21.0.1-0111
Current Package Details:
APPMR-3.130.35-1206_BB-2.03.00.00-0003_BIOS-5.15.00_4.11.05.00_0x04360000_WEBBIOS-6.1-10-e_10-Rel_PCLI-05.00-0200008_BOOT-06.253.57.219_NVDATAMR-2.1012.03-0026

Previous Firmware Package:   21.0.1-0110
Previous Package Details:
APPMR-3.130.25-1196_BB-2.03.00.00-0003_BIOS-5.15.00_4.11.05.00_0x04360000_WEBBIOS-6.1-10-e_10-Rel_PCLI-05.00-0200008_BOOT-06.253.57.219_NVDATAMR-2.1012.03-0026             


Bug Fixes and Enhancements:
===========================
Firmware:
LSIP200139711 (DFCT) fw hit montask at pd.c when rebuilding from raid 6
LSIP200154034 (DFCT) Kill Adapter after 62 cycles of cable pull/push with I/O
LSIP200143213 (DFCT) I/O miscompares when issue OCR.
LSIP200143179 (DFCT) Return status code 'Success' to certain obsolete SCSI commands
LSIP200121969 (DFCT) Liberator FW 10M09 cause system (sles11sp1/rhel6) reset while lspci -vvxxx is used
LSIP200139742 (DFCT) sscd show 0 byte in debugger and MSM
LSIP200139758 (DFCT) Drive comes up as unconfigured bad while running power cycle and error injection script
LSIP200139756 (DFCT) ekms bios is not enable
LSIP200155390 (DFCT) Port fixes for LSIP200112913 and LSIP200116269
LSIP200071988 (DFCT) Inconsistent drive state after drives are changed to different slots.
LSIP200139713 (DFCT) Clear configured with SSC degraded causing FW went to mon_tsk()
LSIP200139759 (DFCT) With multipath setting, found data miscompare while IOs across 2 enclosures
LSIP200153318 (DFCT) FW doesn't detect the iBBU08 if it is remotely mounting with OEM controller
LSIP200123091 (DFCT) DateOfFirstuse is Incorrectly Causing BBU Deep Discharge Requirement
LSIP200139722 (DFCT) Controller hit montask during BGI
LSIP200139762 (DFCT) Configured PDs become not supported PDs, LDs dropping offline.
LSIP200145892 (DFCT) Liberator FW 10M09 cause system (sles11sp1/rhel6) reset while lspci -vvxxx is used
LSIP200104775 (DFCT) Controller reports "phy is bad" for single port with any SATA device
LSIP200139764 (DFCT) HSP commissioned alarm beep goes away after reboot
LSIP200154055 (DFCT) Port fixes
LSIP200155340 (DFCT) port 2TB error handling changes
LSIP200139728 (DFCT) FW aborts the recovery resulting SES not responding
LSIP200142547 (DFCT) Provide mechanism to bypass settings delayPOST and envDelaySOD
LSIP200123036 (CR) Deliver HII in Q1 2011 Liberator maintenance


Installation:
=============
Use MegaCLI to flash the SAS controllers.  MegaCLI can be downloaded from the support and download
section of www.lsi.com

Command syntax:  MegaCli -adpfwflash -f mr2208fw.rom -a0


Download:
http://www.lsi.com/DistributionS ... gr.aspx?asset=56959
2#
发表于 2011-4-21 15:47 | 只看该作者
这fixlist看的是胆战心惊啊= =看来还需要一段时间fw才能成熟一些……
回复 支持 反对

使用道具 举报

3#
 楼主| 发表于 2011-4-22 17:52 | 只看该作者
Planeswalker 发表于 2011-4-21 15:47
这fixlist看的是胆战心惊啊= =看来还需要一段时间fw才能成熟一些……

LSI的新卡一般都需要6個月時間來完善Firmware效能,LSI 9260就是一例子

回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

广告投放或合作|网站地图|处罚通告|

GMT+8, 2025-7-25 06:54

Powered by Discuz! X3.4

© 2001-2017 POPPUR.

快速回复 返回顶部 返回列表