H700电池关闭了怎么开启呀

ey2h

H700电池关闭了怎么开启呀
提示
Controller ID: 0 BBU disabled; changing WB logical drives to WT

per1-q1222

upload your tty log..

ey2h

per1-q1222 发表于 2012-6-18 12:37
upload your tty log..

这个提示是电池坏了吗？是不是买个新的换上就好？

per1-q1222

ey2h 发表于 2012-6-18 12:54
这个提示是电池坏了吗？是不是买个新的换上就好？

請上傳tty log..

ey2h

per1-q1222 发表于 2012-6-18 12:37
upload your tty log..

log帮忙看看，要修理了

ey2h

看样子是电池松了或者坏了？

per1-q1222

你給我message log不明確..
http://www.osslab.com.tw/Storage ... ck_Training/TTY_Log(Firmware_Log)

ey2h

per1-q1222 发表于 2012-6-18 17:52
你給我message log不明確..
http://www.osslab.com.tw/Storage ... ck_Training/TTY_Log(Firmware_Log)

麻烦再看看，谢谢

per1-q1222

T35: BbuInit: eBBU not present.  Disable eBBU feature
T35: Charger detected Battery removal or Charger Fault condition  
T35: EVT#14098-T35: 161=Battery removed
T35: PdInit: PD_INFO entries are 0x280 bytes

BBU毀損..
要更換..

ey2h

per1-q1222 发表于 2012-6-20 12:28
T35: BbuInit: eBBU not present.  Disable eBBU feature
T35: Charger detected Battery removal or Char ...

就是买个新电池换上自己就好了?谢谢

per1-q1222

ey2h 发表于 2012-6-20 16:06
就是买个新电池换上自己就好了?谢谢

是的

ey2h

per1-q1222 发表于 2012-6-20 16:07
是的

他妈的买了新电池他又自己好了，神经病呀！
帮忙看看log，谢谢

per1-q1222

ey2h 发表于 2012-6-21 18:46
他妈的买了新电池他又自己好了，神经病呀！
帮忙看看log，谢谢

從log來看...有一個很奇怪的行為發生..
14131: 2012-6-20,12:34:29 Information: Battery Present
14132: 2012-6-20,12:35:24 Warning: Battery removed
14133: 2012-6-20,12:35:24 Critical: Battery/charger problems detected; SOH Bad
14134: 2012-6-20,13:0:3 Information: Time established as 06/20/12 13:00:03; (8524 seconds since power on)
14135: 2012-6-20,13:55:24 Information: Battery Present
14136: 2012-6-20,13:56:29 Information: Battery temperature is normal
14137: 2012-6-20,13:56:29 Warning: Current capacity of the battery is below threshold
14138: 2012-6-20,13:56:44 Warning: Battery removed
14139: 2012-6-20,13:56:44 Critical: Battery/charger problems detected; SOH Bad
14140: 2012-6-20,14:0:3 Information: Time established as 06/20/12 14:00:03; (12124 seconds since power on)
14141: 2012-6-20,15:0:3 Information: Time established as 06/20/12 15:00:03; (15724 seconds since power on)
14142: 2012-6-20,15:8:35 Information: Shutdown command received from host

14143: 1999-6-20,19:40:17 Information: Firmware initialization started (PCI ID 0079/1000/1f16/1028)
14144: 1999-6-20,19:40:17 Information: Firmware version 2.100.03-1405
14145: 1999-6-20,19:40:19 Information: Battery Present
14146: 1999-6-20,19:40:19 Information: Package version 12.10.2-0004
14147: 1999-6-20,19:40:19 Information: Board Revision 667
14166: 2012-6-20,15:29:15 Information: Time established as 06/20/12 15:29:15; (64 seconds since power on)
14167: 2012-6-20,15:29:51 Information: Battery temperature is normal
14168: 2012-6-20,15:29:51 Warning: Current capacity of the battery is below threshold
14169: 2012-6-20,15:29:51 Information: Battery started charging
14170: 2012-6-20,15:29:51 Warning: BBU disabled; changing WB virtual disks to WT, Forced WB VDs are not affected
14171: 2012-6-20,15:29:51 Information: Policy change on VD 00/0 to [ID=00,dcp=61,ccp=60,ap=0,dc=1,dbgi=0,S=0|0] from [ID=00,dcp=61,ccp=61,ap=0,dc=1,dbgi=0,S=0|0]
14172: 2012-6-20,15:29:51 Information: Policy change on VD 01/1 to [ID=01,dcp=65,ccp=64,ap=0,dc=1,dbgi=1,S=0|0] from [ID=01,dcp=65,ccp=65,ap=0,dc=1,dbgi=1,S=0|0]
14173: 2012-6-20,15:29:51 Information: Policy change on VD 02/2 to [ID=02,dcp=05,ccp=04,ap=0,dc=0,dbgi=0,S=0|0] from [ID=02,dcp=05,ccp=05,ap=0,dc=0,dbgi=0,S=0|0]
14174: 2012-6-20,15:33:58 Information: Time established as 06/20/12 15:33:58; (347 seconds since power on)
14175: 2012-6-20,16:0:58 Information: Time established as 06/20/12 16:00:58; (1967 seconds since power on)
14176: 2012-6-20,16:20:46 Information: Current capacity of the battery is above threshold
14177: 2012-6-20,16:20:46 Information: BBU enabled; changing WT virtual disks to WB
他有可能是一個bug, 但我不是很確定...
你嘗試做CC看看..
看會不會bus reset情況..

ey2h

我升级了最新的固件A8说是修复了这种WT-WB的问题，但是刷完没反应，今天到好了太怪了
CC是什么？

per1-q1222

ey2h 发表于 2012-6-21 19:36
我升级了最新的固件A8说是修复了这种WT-WB的问题，但是刷完没反应，今天到好了太怪了
CC是什么？

Consistency Check..
看衝進cache的時候..
是否發生異常狀況..

ey2h

per1-q1222 发表于 2012-6-21 19:10
從log來看...有一個很奇怪的行為發生..
14131: 2012-6-20,12:34:29 Information: Battery Present
1413 ...

找到CC了开始了，漫长等待4个2T组raid5

ey2h

per1-q1222 发表于 2012-6-21 19:46
Consistency Check..
看衝進cache的時候..
是否發生異常狀況..

应该是有问题，又出现没连接电池情况出现。

ey2h

per1-q1222 发表于 2012-6-21 19:46
Consistency Check..
看衝進cache的時候..
是否發生異常狀況..

换了新电池，好像还没我呢个好都循环14次了
区别是maximum error margin 一个是100%一个是0%
电池容量也不一样！一个07年一个08年

per1-q1222

ey2h 发表于 2012-6-22 11:03
换了新电池，好像还没我呢个好都循环14次了
区别是maximum error margin 一个是100%一个是0%
电池容量也 ...

区别是maximum error margin 一个是100%一个是0%

不懂你這段的意思..


LSI的BBU第一次使用時, 會有初始化的情況...
一開始會有maximum error margin =100%的情況..
實屬正常情況...
第一次使用需要等待比較漫長的時間..init+relearn+charge...

ey2h

哦，这是正常的，那我慢慢等吧，谢谢了。