|
官網終於放出新版本,不知道有沒有修正前一版的BUG?
intel rs25db080+lsi 9271 已更新成功無誤。
http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/23.9.0-0018_SAS_FW_IMAGE_APP_3.220.35.1998.zip
Release date: 11/12/12
======================
Supported Controllers:
======================
MegaRAID SAS 9265-8i
MegaRAID SAS 9266-4i
MegaRAID SAS 9266-8i
MegaRAID SAS 9285-8e
MegaRAID SAS 9285CV-8e
MegaRAID SAS 9270-8i
MegaRAID SAS 9271-4i
MegaRAID SAS 9271-8i
MegaRAID SAS 9271-8iCC
MegaRAID SAS 9286-8e
MegaRAID SAS 9286CV-8e
MegaRAID SAS 9286CV-8eCC
This package includes support for CacheCade Pro 2.0 and CacheVault(if enabled).
Component:
=========
SAS MegaRAID Firmware Release for MegaRAID Controllers
Release date: 11/12/12
Version Numbers:
===============
Current Package Details:
Firmware Package: 23.9.0-0018 (MR 5.4 P1)
WebBIOS 6.1-49-e_49-Rel
Firmware 3.220.35-1998
ROMENV 1.08
PCLI 05.05.03
BootBlock 2.05.00.00-0009
NVDATA MR2.1209.03-0112
BootBlockCommon 07.26.13.219
UEFI_Driver 0x05180000
Hii 2.05.00
FCODE 4.12.05.00
BIOS 5.38.00
Bug Fixes and Enhancements:
===========================
List of bug fixes and enhancements:
Firmware:
SCGCQ00319081 - (Closed) - Drives dropped when flashing FW back from MR5.3 to 11M08 and FW crashes with TLB error
SCGCQ00309752 - (Closed) - BGI does not correct ECC medium errors on 2nd arm of Raid 10 array
SCGCQ00329727 - (Closed) - Cache offload would not work when a USB debugger was attached
SCGCQ00298871 - (Closed) - Controller (Alcor-S with OEM PCI id's) is running into a Machine Check loop during copyback test.Controller time clock refer
SCGCQ00329658 - (Closed) - Foreign config after reboot with some drives.
SCGCQ00329666 - (Closed) - MR5.4 FW loses its time settings after OCR
SCGCQ00344175 - (Port_Complete) - SES device is not found during cable pull testing
SCGCQ00336944 - (Port_Complete) - Firmware assertion failure during power-cycle test
SCGCQ00347711 - (Port_Complete) - RAID Member disks state changed to (foreign) online and
BIOS
SCGCQ00341354 (DFCT) - MR HWR OpROM BIOS : OOB (BMC) function corrupts EBDA area used by other server function.
SCGCQ00340572 (ENHREQ) - BIOS should check pMRCtrlInfo ->maxHANodes with > 1 to determine HAMR
|
|