POPPUR爱换

 找回密码
 注册

QQ登录

只需一步,快速开始

手机号码,快捷登录

搜索
查看: 5127|回复: 2
打印 上一主题 下一主题

LSI 1.02.08_StorCLI_Phase3

[复制链接]
跳转到指定楼层
1#
发表于 2013-1-19 05:02 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
這次改進眾多..
提供更詳細的功能..
包括了相關的高階軟體服務資訊..
http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/1.02.08_StorCLI_Phase3.txt

download:
http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/1.02.08_StorCLI_Phase3.zip

2#
 楼主| 发表于 2013-1-19 05:06 | 只看该作者
本帖最后由 per1-q1222 于 2013-1-19 05:11 编辑

簡單的命令看出更多的豐富化資訊..
C:\Users\Administrator>storcli64 /c0 show all
Controller = 0
Status = Success
Description = None


Basics :
======
Controller = 0
Model = Intel (R) RAID Controller RS25AB080
Serial Number = SV20513352
Current Controller Date/Time = 01/19/2013, 04:57:16
Current System Date/time = 01/19/2013, 04:57:23
SAS Address = 500605b00437a940
Mfg Date = 02/25/12
Rework Date = 00/00/00
Revision No = 22A


Version :
=======
Firmware Package Build = 23.11.0-0021
Firmware Version = 3.230.05-2100
Bios Version = 5.38.00_4.12.05.00_0x05240000
NVDATA Version = 2.1301.03-0115
Boot Block Version = 2.05.00.00-0010
Bootloader Version = 07.26.13.219
Driver Name = megasas2.sys
Driver Version = 6.505.05.00


Bus :
===
Vendor Id = 0x1000
Device Id = 0x5B
SubVendor Id = 0x8086
SubDevice Id = 0x9268
Host Interface = PCIE
Device Interface = SAS-6G
Bus Number = 4
Device Number = 0
Function Number = 0


Pending Images in Flash :
=======================
Image name = No pending images


Status :
======
Controller Status = OK
Memory Correctable Errors = 0
Memory Uncorrectable Errors = 0
ECC Bucket Count = 0
Any Offline VD Cache Preserved = No
BBU Status = 0
Support PD Firmware Download = No
Lock Key Assigned = No
Failed to get lock key on bootup = No
Lock key has not been backed up = No
Bios was not detected during boot = No
Controller must be rebooted to complete security operation = No
A rollback operation is in progress = No
At least one PFK exists in NVRAM = No
SSC Policy is WB = No
Controller has booted into safe mode = No


Supported Adapter Operations :
============================
Rebuild Rate = Yes
CC Rate = Yes
BGI Rate  = Yes
Reconstruct Rate = Yes
Patrol Read Rate = Yes
Alarm Control = Yes
Cluster Support = Yes
BBU  = Yes
Spanning = Yes
Dedicated Hot Spare = Yes
Revertible Hot Spares = Yes
Foreign Config Import = Yes
Self Diagnostic = Yes
Allow Mixed Redundancy on Array = No
Global Hot Spares = Yes
Deny SCSI Passthrough = No
Deny SMP Passthrough = No
Deny STP Passthrough = No
Support more than 8 Phys = Yes
FW and Event Time in GMT = No
Support Enhanced Foreign Import = Yes
Support Enclosure Enumeration = Yes
Support Allowed Operations = Yes
Abort CC on Error = Yes
Support Multipath = Yes
Support Odd & Even Drive count in RAID1E = No
Support Security = No
Support Config Page Model = Yes
Support the OCE without adding drives = Yes
support EKM = No
Snapshot Enabled = No
Support PFK = Yes
Support PI = Yes
Support LDPI Type1 = No
Support LDPI Type2 = No
Support LDPI Type3 = No
Support Ld BBM Info = No
Support Shield State = Yes
Block SSD Write Disk Cache Change = No
Support Suspend Resume BG ops = Yes
Support Emergency Spares = Yes
Support Set Link Speed = Yes
Support Boot Time PFK Change = No
Support JBOD = Yes
Disable Online PFK Change = No
Support Perf Tuning = Yes
Support SSD PatrolRead = Yes
Real Time Scheduler = Yes
Support Reset Now = Yes
Support Emulated Drives = Yes
Headless Mode = Yes
Dedicated HotSpares Limited = No


Supported PD Operations :
=======================
Force Online = Yes
Force Offline = Yes
Force Rebuild = Yes
Deny Force Failed = No
Deny Force Good/Bad = No
Deny Missing Replace = No
Deny Clear = No
Deny Locate = No
Support Power State = Yes
Set Power State For Cfg = No
Support T10 Power State = No
Support Temperature = Yes


Supported VD Operations :
=======================
Read Policy = Yes
Write Policy = Yes
IO Policy = Yes
Access Policy = Yes
Disk Cache Policy = Yes
Reconstruction = Yes
Deny Locate = No
Deny CC = No
Allow Ctrl Encryption = No
Enable LDBBM = Yes
Support FastPath = Yes
Performance Metrics = Yes
Power Savings = No
Support Powersave Max With Cache = No
Support Breakmirror = No
Support SSC WriteBack = Yes
Support SSC Association = Yes



Advanced Software Option :
========================

--------------------------------------------------------------
Adv S/W Opt                 Time Remaining  Mode
--------------------------------------------------------------
MegaRAID FastPath           Unlimited      Secured
MegaRAID CacheCade Pro 2.0  Unlimited       Secured
MegaRAID RAID6              Unlimited       Factory Installed
MegaRAID RAID5              Unlimited       Secured
--------------------------------------------------------------

Safe ID =  VC7J48KMVJ72Q6VIBRGKB41ULH924J917SR6CWIZ

HwCfg :
=====
ChipRevision =  C1
BatteryFRU = N/A
Front End Port Count = 0
Backend Port Count = 8
BBU = Present
Alarm = Disable
Serial Debugger = Present
NVRAM Size = 32KB
Flash Size = 16MB
On Board Memory Size = 1024MB
On Board Expander = Absent
Temperature Sensor for ROC = Present
Temperature Sensor for Controller = Absent
Current Size of CacheCade (GB) = 0
Current Size of FW Cache (MB) = 799
ROC temperature(Degree Celcius) = 46


Policies :
========

Policies Table :
==============

------------------------------------------------
Policy                          Current Default
------------------------------------------------
Predictive Fail Poll Interval   300 sec
Interrupt Throttle Active Count 16
Interrupt Throttle Completion   50 us
Rebuild Rate                    80 %    30%
PR Rate                         80 %    30%
BGI Rate                        80 %    30%
Check Consistency Rate          80 %    30%
Reconstruction Rate             80 %    30%
Cache Flush Interval            4s
------------------------------------------------

Flush Time(Default) = 4s
Drive Coercion Mode = 1GB
Auto Rebuild = On
Battery Warning = On
ECC Bucket Size = 15
ECC Bucket Leak Rate (hrs) = 24
Restore HotSpare on Insertion = On
Expose Enclosure Devices = On
Maintain PD Fail History = On
Reorder Host Requests = On
Auto detect BackPlane = logic of SGPIO,i2c SEP using h/w mechanism like GPIO pins
Load Balance Mode = Auto
Security Key Assigned = Off
Disable Online Controller Reset = Off
Use drive activity for locate = On


Boot :
====
BIOS Enumerate VDs = 1
Stop BIOS on Error = On
Delay during POST = 0
Spin Down Mode = None
Enable Ctrl-R = Yes
Enable Web BIOS = Yes
Enable PreBoot CLI = Yes
Enable BIOS = Yes
Max Drives to Spinup at One Time = 4
Maximum number of direct attached drives to spin up in 1 min = 120
Delay Among Spinup Groups (sec) = 2
Allow Boot with Preserved Cache = On


Defaults :
========
Phy Polarity = 0
Phy PolaritySplit = 0
Strip Size = 256kB
Write Policy = WB
Read Policy = Adaptive
Cache When BBU Bad = Off
Cached IO = Off
VD PowerSave Policy = Controller Defined
Default spin down time (mins) = 360
Coercion Mode = 1 GB
ZCR Config = Unknown
Max Chained Enclosures = 16
Direct PD Mapping = No
Restore Hot Spare on Insertion = Yes
Expose Enclosure Devices = No
Maintain PD Fail History = Yes
Zero Based Enclosure Enumeration = No
Disable Puncturing = No
EnableLDBBM = No
Un-Certified Hard Disk Drives = Allow
SMART Mode = Mode 6
Enable LED Header = Yes
LED Show Drive Activity = Yes
Dirty LED Shows Drive Activity = No
EnableCrashDump = No
Disable Online Controller Reset = No
Treat Single span R1E as R10 = No
Power Saving option = Enable
TTY Log In Flash = No
Auto Enhanced Import = No
BreakMirror RAID Support = No
Disable Join Mirror = No
Enable Shield State = Yes
Time taken to detect CME = 60 sec


Capabilities :
============
Supported Drives = SAS, SATA
RAID Level Supported = RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no
span, PRL11-RLQ0 DDF layout with span
Enable JBOD = Yes
Mix in Enclosure = Allowed
Mix of SAS/SATA of HDD type in VD = Allowed
Mix of SAS/SATA of SSD type in VD = Not Allowed
Mix of SSD/HDD in VD = Not Allowed
SAS Disable = No
Max Arms Per VD = 32
Max Spans Per VD = 8
Max Arrays = 128
Max VD per array = 16
Max Number of VDs = 64
Max Parallel Commands = 1008
Max SGE Count = 60
Max Data Transfer Size = 8192 sectors
Max Strips PerIO = 42
Max Configurable CacheCade Size = 512
Min Strip Size = 8 KB
Max Strip Size = 1.0 MB


Scheduled Tasks :
===============
Consistency Check Reoccurrence = 168 hrs
Next Consistency check launch = 01/19/2013, 2:00:00
Patrol Read Reoccurrence = 168 hrs
Next Patrol Read launch = 01/26/2013, 2:00:00
Battery learn Reoccurrence = 720 hrs
Next Battery Learn = 02/10/2013, 19:00:00
OEMID = LSI

Drive Groups = 1

TOPOLOGY :
========

--------------------------------------------------------------------------
DG Arr Row EID:Slot DID Type  State BT       Size PDC  PI SED DS3  FSpace
--------------------------------------------------------------------------
0 -   -   -        -   RAID5 Optl  Y    6.359 TB enbl N  N   none N
0 0   -   -        -   RAID5 Optl  Y    6.359 TB enbl N  N   none N
0 0   0   20:12    8   DRIVE Onln  N  930.390 GB enbl N  N   none -
0 0   1   20:13    24  DRIVE Onln  N  930.390 GB enbl N  N   none -
0 0   2   20:14    18  DRIVE Onln  N  930.390 GB enbl N  N   none -
0 0   3   20:15    11  DRIVE Onln  N  930.390 GB enbl N  N   none -
0 0   4   20:16    12  DRIVE Onln  N  930.390 GB enbl N  N   none -
0 0   5   20:17    17  DRIVE Onln  N  930.390 GB enbl N  N   none -
0 0   6   20:18    14  DRIVE Onln  N  930.390 GB enbl N  N   none -
0 0   7   20:19    19  DRIVE Onln  N  930.390 GB enbl N  N   none -
--------------------------------------------------------------------------

DG=Disk Group Index|Arr=Array Index|Row=Row Index|EID=Enclosure Device ID
DID=Device ID|Type=Drive Type|BT=Background Task Active|PDC=PD Cache
PI=Protection Info|SED=Self Encrypting Drive|DS3=Dimmer Switch 3
FSpace=Free Space Present|dflt=Default|Msng=Missing|Frgn=Foreign

Virtual Drives = 1

VD LIST :
=======

------------------------------------------------------------------------
DG/VD TYPE  State Access Consist Cache Cac sCC     Size Name
------------------------------------------------------------------------
0/0   RAID5 Optl  RW     Yes     RWBD  -   ON  6.359 TB VD01HDDX08SAS6G
------------------------------------------------------------------------

Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|B=Blocked|Consist=Consistent|
Ra=Read Ahead Adaptive|R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency

Physical Drives = 8

PD LIST :
=======

---------------------------------------------------------------------------
EID:Slt DID State DG       Size Intf Med SED PI SeSz   Model            Sp
---------------------------------------------------------------------------
20:12     8 Onln   0 930.390 GB SAS  HDD N   N  512 KB WD1000FYYG       U
20:13    24 Onln   0 930.390 GB SAS  HDD N   N  512 KB WD1000FYYG       U
20:14    18 Onln   0 930.390 GB SAS  HDD N   N  512 KB WD1000FYYG       U
20:15    11 Onln   0 930.390 GB SAS  HDD N   N  512 KB WD1000FYYG       U
20:16    12 Onln   0 930.390 GB SAS  HDD N   N  512 KB WD1000FYYG       U
20:17    17 Onln   0 930.390 GB SAS  HDD N   N  512 KB WD1000FYYG       U
20:18    14 Onln   0 930.390 GB SAS  HDD N   N  512 KB WD1000FYYG       U
20:19    19 Onln   0 930.390 GB SAS  HDD N   N  512 KB WD1000FYYG       U
---------------------------------------------------------------------------

EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|UBad-Unconfigured Bad|Onln-Online
Offln-Offline|Intf-Interface|Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|GHS-Global Hotspare|F-Foreign

BBU_Info :
========

---------------------------------------------------------------------------
Model  State       RetentionTime Temp Mode MfgDate    Next Learn
---------------------------------------------------------------------------
CVPM02 Operational 0 hour(s)     28C  0    2107/15/31 2013/02/10  19:40:46
---------------------------------------------------------------------------

Mode 0 - 48 hours retention @60 degree Centigrade, 1 year Service Life


回复 支持 反对

使用道具 举报

3#
发表于 2013-1-19 09:14 | 只看该作者
这东西比MegaCli好用很多
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

广告投放或合作|网站地图|处罚通告|

GMT+8, 2025-1-7 02:24

Powered by Discuz! X3.4

© 2001-2017 POPPUR.

快速回复 返回顶部 返回列表