联想的凸主板能不能用Q8200

Jerry99

就是前一阵子比较热的288凸主板，用Q8200点不亮，不知有没有人在这个板子上用过4核的U?

紫夜星辰

等图片，没看过。。。

982352

你刷最新的 20090320的Bios试下看，呵呵，目前用5200还不错

982352

我的刷了，bios revision level：5CKT29AUS 变为 5CKT46AUS

没研究出来有什么区别，应该支持Q8200的，貌似看过资料，忘记原文出处了。不知道怎么上图和文件

原文：
5cjy46usa.exe

Flash BIOS update - Flash from Operating System version
for ThinkCentre M58 , M58p
Version 5CKT46A
Installation README

This package updates the basic input/output system (BIOS) on
ThinkCentre M58 (type 6139, 6175, 6239, 6258, 6332, 6333, 7174,
7187, 7244, 7354, 7348, 7355, 7359, 7360, 7373, 7626, 7627, 7628,
7637, 7638, 7639, 8820, 8910, 9960) and  ThinkCentre M58p (type
6136, 6137, 6138, 6209, 6234, 7220, 7188, 7345, 7346, 7347, 7356,
7357, 7358, 7483, 7484, 7479, 7629, 7633, 7635, 8336, 8338, 9961,
9964, 9965) systems.

BIOS is programming that controls low-level hardware operations,
including interactions with diskette drives, hard disk drives,
and the keyboard. The BIOS is stored on a chip.  Your computer
uses flash BIOS, which can be updated through a program on a
flash diskette so that you do not have to replace the BIOS
chip to update the BIOS.

Do not write protect the flash diskette as this may cause the
flash process to hang.

Note: :If the downlevel or the current BIOS version is lower than 5
CKT28A, DO NOT use 5cjy46usa.exe (flash from operating system version)
directly to update the BIOS. Instead, 5cj946a.iso or 5cjt46a.zip should
be used to update the BIOS.


Print this file so that you can refer to it during the installation.

Downloading the package
=======================
1. Click the file link to download the file from the web page.
2. When prompted, select a drive and directory in which to save the downloaded
   file.


Extracting the package
======================
1. Click Start, select Find or Search, then click Files and Folders.
2. Type 5cjy46usa.exe in the search field, then click Find Now.
   This will locate the file you just downloaded.
3. Double-click the 5cjy46usa.exe icon.
4. Read the license agreement
5. Click I accept the terms in the license agreement.
6. Click Next.
7. Ensure that "Save files in folder" is set to
   C:LenovoTOOLSFLASH5CJY46USA.
8. Click Next.
9. Click Finish.


Installing the package
======================
1.  Close all open applications.
2.  Click Start, then click Run.
3.  Type C:LenovoTOOLSFLASH5CJY46USAwinphlash.exe.
4.  Click OK.
5.  Follow onscreen instructions to update BIOS.


Summary of Changes
==================
General Information:

     5CKTxxA is the binary image level. (BIOS)
     NOTE: All changes carry forward. That is, if a change is added in 01, it is
           also in 02, 03 etc.

Changes for 5CKTxxA/5CJTxxA:

5CKT46A/5CJT46A
- Updates the latest VGA BIOS

5CKT44A/5CJT44A
- Fixes the issue where Card Reader can not be detected correctly
  in setup   

5CKT43A/5CJT43A
- Updates Computer Type in ACPI table
- Fixes the issue where PCI LAN does not work when Video is set to IGD
- Fixes the issue where winphlash can not update bios after S3      

5CKT41A/5CJT41A
- Fixes the issue where system hang if F1 is pressed in Raid mode   

5CKT40A/5CJT40A   
- Supports SMC function

5CKT39A/5CJT39A
- Fixes the problem where the system hangs
   with SOL/IDER and fingerprint Keyboard        
- Fixes the issue where IDE-R fails when PXE Boot Agent  is disabled

5CKT38A/5CJT38A
- Fix the problem where 'm' key cannot be set as HDD password in
  POST for French keyboard

5CKT37A/5CJT37A
- Fixes the issue  with the 'm' key which could not be used
  to set as password in French Keyboard   
- Updates the Winphlash 1.6.9.7
- Fixes the problem where the serial number and machine type
  could be set as 7 or 20 characters in setup.

5CKT36A/5CJT36A   
- Fixes the issue where PCIe 1x GbE card cannot wake up system
  when plugged in PCIe 16x slot

5CKT35A/5CJT35A
- Fixes the POST no F1&F12 prompts when in Legacy mode .         
- Fixes the problem where system cannot boot from Primary boot sequence after reboot
    if set  to Automatic Startup Sequence in Setup.
- Fixes the issue of GbE showing yellow mark in Device Management
  after Disable/Enable onboard Lan.
- Supports Casper Card

5CKT34A/5CJT34A
- Updates the latest Intel VGA BIOS

5CKT33A/5CJT33A
- Updates QST to support Yorkfield C1 processors

5CKT32A/5CJT32A
- Rectifies the BIOS by Selftest

5CKT31A/5CJT31A
- Updates the latest Intel VGA bios
- Adds the feature to detect the status of CPU FAN in POST,
  if the CPU FAN does not operate, system will report FAN error in POST
- Fixes the problem where system can not shutdown automatically
  after BootBlock Recovery success

5CKT30A/5CJT30A
- Initial BIOS Release


Trademarks
==========
ThinkCentre is a trademark of the Lenovo Corporation in the
United States, other countries, or both.

Microsoft and Windows are trademarks of Microsoft Corporation in
the United States, other countries, or both.

Other company, product, and service names may be trademarks or
service marks of others.

THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.
LENOVO DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS
FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE
INFORMATION IN THIS DOCUMENT.  BY FURNISHING THIS DOCUMENT, LENOVO
GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.

(C) Copyright Lenovo Corporation 2009, all rights reserved.

jinjinchn

这个主板内存无法异步，e5200不硬改266外频的话，1066的ddr3的内存只能跑800的频率，E7是266的外频，内存能到1066，而e8、Q8是333外频，我没有用过，估计得上1333的ddr3才能点亮

ed_kay

就是前一阵子比较热的288凸主板，用Q8200点不亮，不知有没有人在这个板子上用过4核的U?
Jerry99 发表于 2009-4-27 13:18

q45的芯片组肯定是支持4核的，用这款板子的主机中就有4核的型号，lz的电源适配器是多少w的。这块板标配的适配器是130w。

982352

应该和电源有关，科里有块8200，有空我测试一下就ok

hehehe21

等图片，没看过。。。

zerozerone

Note: :If the downlevel or the current BIOS version is lower than 5
CKT28A, DO NOT use 5cjy46usa.exe (flash from operating system version)
directly to update the BIOS. Instead, 5cj946a.iso or 5cjt46a.zip should
be used to update the BIOS.

说明说的很清楚 低于5CKT28A需要用DOS过光盘刷新,别望了在WINDOWS下c:LenovoTOOLSFLASH5CJY48USAwinphlash.EXE /BBL 更新BOOTBLOCK

更新地址
http://www-307.ibm.com/pc/suppor ... &lndocid=MIGR-70892

5cjy48usa.exe     2,477,513     Flash BIOS update (Flash from operating system version)
5cjy48usa.txt     5,793     Installation instructions for Flash BIOS update (Flash from operating system version)

下来开始运行里 执行
c:LenovoTOOLSFLASH5CJY48USAwinphlash.EXE /BBL
更新BOOTBLOCK

另外各位在CPU菜单里是否有CPU微码版本显示 不同系列U显示不同
还有在BIOS主界面内BOOTBLOCK是什么版本
还有就是主板的PCB都是什么版本?

我有个Q45 MATX的小板FRU 46R1516 你们的板应该是46R1518的 默认BIOS版本5CKT14A,BB也是这个版本 换了很多种方式都刷不出来,一刷就黑,另外一个BB是5C21B的就用光盘更新没问题

comic020

长见识了,很多强人

zerozerone

多的不说了,看此帖
http://we.pcinlife.com/viewthread.php?tid=1165423&page=1&extra=

另外此板在电源供给方面限制,太高功耗的U支持起来难,不建议使用

dragon-123

支持酷睿全系列CPU，已经有朋友上过Q9400了。。。。

28631700

上图啊，先看看再说