| MBD-H8QGi-F | - H8QGi-F (Standard Retail Pack)
|
| Physical Stats | | Form Factor | | Dimensions | - 16.48" x 13" (41.9cm x 33.0cm)
|
| Processor/Chipset | | CPU | - Quad 1944-pin Socket G34
- Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
- HT3.0 Link support
| Chipset | - AMD SR5690/SR5670/SP5100 Chipset
|
| System Memory | | Memory Capacity | - 32 DIMM sockets
- Supports up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs
- Quad channel memory bus
- For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
- [url=]See Detailed Memory Support Matrix[/url]
| Memory Type | - Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| On-Board Devices | | SATA | - AMD SP5100 (RAID 0, 1, 10)
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
| Network Controllers | - Intel® 82576 controller, Dual-Port
Gigabit Ethernet - 10/100/1000BASE-T support
| VGA | - Matrox G200 16MB DDR2 graphics
| Super I/O | |
| Input / Output | | SATA | | LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
| USB | - 7x USB 2.0 ports
- 2x Rear, 4x internal header, and 1x type A
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x serial port header
| Others | - 1 SATA DOM power connector, TPM header
|
| Expansion Slots | | PCI-Express | - 2 PCI-E 2.0 x16
- 1 PCI-E 2.0 x8
- 1 PCI-E 2.0 x8 or 1 UIO slot
|
| | | Chassis ( Optimized for H8QGi-F ) | | 1U Chassis | - [url=]CSE-818TQ-1400LPB[/url]
Requires rev. K chassis, air shroud MCP-310-81807-0B*
| 2U Chassis | - [url=]CSE-828TQ+-R1400LPB[/url]
Requires rev. K chassis, air shroud MCP-310-82801-0N* - CSE-828TQ+-R1K43LPB
Requires rev. K chassis, air shroud MCP-310-82801-0N*
| Tower / 4U Rackmount | - [url=]CSE-418E16-R1K62B[/url]
Requires air shroud MCP-310-84802-0B* - [url=]CSE-748TQ-R1400B[/url]
Requires rev. K chassis, air shroud MCP-310-74802-0B* - [url=]CSE-848A-R1K62B[/url]
Requires air shroud MCP-310-84802-0B* - [url=]CSE-848E16-R1K62B[/url]
Requires air shroud MCP-310-84802-0B*
| Note | - * Sold separately, please refer to the chassis web spec for the air shroud info in the optional part list.
|
| | Server(s) ( with H8QGi-F ) | | Model(s) | - [url=]AS -2042G-TRF[/url]
- [url=]AS -4042G-TRF[/url]
|
| System BIOS | | BIOS Type | - 16Mb SPI Flash ROM with AMI® BIOS
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| Management | | Software | - IPMI (Intelligent Platform Management Interface) 2.0
- [url=]Super Doctor III[/url]
| Power Configurations | - ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
|
| PC Health Monitoring | | CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
| FAN | - Up to 9-fan status tachometer monitoring
- Up to nine 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only) - Pulse Width Modulated (PWM) fan connectors
| Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 9x fan connectors
- I2C Temperature Sensing Logic
| LED | - CPU / System Overheat LED
- +5V Standby Alert LED
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| Operating Environment / Compliance | | RoHS
|
[url=][/url]- [url=]RoHS Compliant 6/6, Pb Free[/url]
| Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
| OS Compatibility | | • Please see our [url=]OS Compatibility Chart[/url] |
| Regulatory | | FCC | - Passed to meet FCC standard requirement
|
|