LSI MegaRAID SAS 8888ELP / 8708ELP / 8708EM2 New Firmware Release - 11/08/2008

idolclub

＊＊＊ 此版加強對SSD的支持度及兼容性，亦新增加對硬盤的環保電源管理(Power Savings)功能 ＊＊＊


************************************

LSI Logic MegaRAID Firmware Release

************************************

Release date: 10/30/08

======================
Supported Controllers:
======================
MegaRAID SAS 8704ELP
MegaRAID SAS 8704EM2
MegaRAID SAS 8708ELP
MegaRAID SAS 8708EM2
MegaRAID SAS 8880EM2
MegaRAID SAS 8888ELP


Component:
=========
SAS MegaRAID Firmware Release for MegaRAID 1078 Controllers
Release Date: 10/30/08


Version Numbers:      
===============
Current Firmware Package:   9.1.1-0013 (EF)
Current Package Details:    APP-1.40.02-0514_BB-1.00.00.01-0011_BIOS-2.02.00_WEBBIOS-2.2-13-e_6-Rel

Previous Firmware Package:  9.0.1-0034 (UM3)
Previous Package Details:   APP-1.20.32-0512_BB-1.00.00.01-0011_BIOS-2.01.00_WEBBIOS-1.1-49-e_15-Rel


Bug Fixes and Enhancements:
===========================
******
This is a New Major Release that should be used in favor of previous firmware releases.  
It includes a number of bug fixes.  A list of enhancements is listed below.
******

Firmware:
LSID100094008 (CO) CR_Ref# LSID100081552: Improve FW handling of bad 20-pin battery cable
LSID100094307 (CO) CR_Ref# LSID100064254: Fail-LED not activated on failed drive after Hotspare Rebuild started
LSID100094108 (CO) CR_Ref# LSID100064984: Windows 2008 Driver with 1078 MSI support
LSID100094011 (CO) CR_Ref# LSID100064576: Support fot Solid state Disk devices
LSID100093990 (CO) CR_Ref# LSID100071555: Ability to power down drives for power savings
LSID100099332 (CO) CR_Ref# LSID100071361: PNP ID added for 8704EM2

WebBIOS:
LSID100095056 (CO) CR_Ref# LSID100071555: Ability to power down drives for power savings
LSID100094024 (CO) CR_Ref# LSID100080886: Redesign MSM & WebBIOS Device Tree Display
LSID100094020 (CO) CR_Ref# LSID100064576: Support fot Solid state Disk devices
LSID100092004 (CO) Created the CO for CR #81584-Request to show HDD model names in WebBIOS
LSID100093014 (CO) CR_Ref# LSID100050844: Need option in CLI and WebBIOS to enable NCQ
LSID100094013 (CO) CR_Ref# LSID100064576: Support fot Solid state Disk devices
LSID100094112 (CO) CR_Ref# LSID100090637: UEFI 2.0 deliverables
LSID100094625 (CO) CR_Ref# LSID100070100: Change to Make Data Consistent in NVRAM events


BIOS:
LSID100094111 (CO) CR_Ref# LSID100090637: UEFI 2.0 deliverables

Installation:
=============
Use MegaCLI to flash the SAS controllers.  The DOS version of MegaCLI is included
in the zip file.  Windows and Linux MegaCLI can be downloaded from the download
section of www.megaraid.com.

Command syntax:  MegaCli -adpfwflash -f SAS1078_FW_Image.rom -a0


Firmware Download:
http://www.lsi.com/DistributionSystem/AssetDocument/9.1.1-0013_SAS_FW_Image_APP-1.40.02-0514.zip

cetusli

这几天为了解决刚入手的15k6闲时有持续寻道声音的问题，刷了好几遍firmware了

我的是5i，对应8408E，可以刷LSI的最新firmware没有问题

刷完了，开机BIOS画面和系统中仍然认成Dell Perc 5i
开机的Ctrl+R依然有效，而且进去仍然是Dell原来的界面

初始化到100%的时候，出来
一行“按Ctrl+Y进入xxxx”的提示，但是一按就死机

后来看没什么变化，又刷回Dell的去了

xuyee2001

6i能刷嘛？