POPPUR爱换

标题: 巴比禄BUFFALO Terastation Pro II 已出 [打印本页]

作者: kmper    时间: 2010-12-8 13:24
标题: 巴比禄BUFFALO Terastation Pro II 已出
本帖最后由 kmper 于 2010-12-15 17:05 编辑

原帖见下面
http://we.pcinlife.com/thread-1424937-1-1.html

上次贴出来之后又去了上海半年,中间的故事又曲折离奇,结果如下:
LS-GL被我一朋友拿去了,刷了freelink,装的一个320G的2.5‘硬盘,只装了一个mldonkey,现在24小时挂机。
wrt350n v2,自己现在在用,顺利激活128M,然后自己编译了个openwrt,双wan接入,不过歌华宽带**,再多的wan接上去速度也不快。

现在只剩下4盘位的BUFFALO TS-Pro II(TS-HTGL)   图片还是原来的图片,放在角落里面大半年没有动过了,最近几天才翻出来。引用原来的介绍

二个:Linkstation HTGL裸板,128M DDR内存 CPU500MHz 4个sata硬盘接口,带电源,如图,YLJ,成色定义为**。baoyi的货,带4组sta线和电源转接头。
具体参考http://www.baoyinet.com/bbs/forumdisplay.php?fid=27
我可以通过QQ传ghost镜像,PS:单硬盘无法升级FW,ghost带的系统不是很稳定,rtorrent需自己编译,否则容易出错
卖价:400RMB


现在350RMB,这个带外壳的淘宝上面都要1000多了,350就不要砍价了吧,运费收20,不够的我补(电源太重,肯定要补钱)

这个也来一个后续:ghost后接4硬盘升级到最新的固件,很稳定了,mldonkey也没有问题,ghost镜像里面的固件版本太低,传送大文件的时候Samba容易挂起,当然也可以自己重新装一个samba最新版的,不过我没有测试



图片就见原帖吧,一样的没有动过



WRT350也可以出。呵呵





作者: kmper    时间: 2010-12-8 13:25
旺旺 luohoushi@msn.com
作者: kmper    时间: 2010-12-8 19:46
自己顶一下
作者: kmper    时间: 2010-12-9 10:26
刚才又去wiki上面看了一下,解决读写大文件出错更新到最新的fw就可以了,或者关闭温度和风扇监控,里面说的好像是大量io读写的时候cpu负载高,监控程序响应慢认为出错,然后就报警了。


I wrote a small routine to hog all CPU processing. I have found that when processor

bound and unable to correctly schedule other task the kernel is unable to give any

time to any other running tasks: even worse when I/O is running as this has very high

scheduling priority. This results in many of the daemons not getting run; especially

in my situation where the single process was running 100% CPU usage. This means that

even the fan/watch dog daemon micro_evtd can not run. We have seen issues with this

where the box shuts down after 5 mins if the watchdog is enabled. However, other

crashes are still being reported. With my latest test I have found that the processor

overheats as the fan is not providing enough cooling: I stopped the fan in my test as

I thought this was the issue. To overcome this problem with these tasks edit the

micro_evtd config file to

MONITOR=OFF
REFRESH=OFF

and run microapl -**_set_speed full.

This stops the watchdog and stops fan monitoring in the daemon and allows user

control over the fan speed, hence the microapl -**_set_speed command. You can use

slower speeds but these depend on your situation and room temp etc.


it should be in /etc/default/

/etc/default/micro_evtd if I remember correctly...

Or /etc/micro_evtd/micro_evtd.conf for newer versions.

没时间去测试了以前用mldonkey下载就没问题,一用rtorrent0.7.9就出错,换了新版的0.8.3就好了
作者: kmper    时间: 2010-12-9 10:35
http://www.baoyinet.com/bbs/view ... &extra=page%3D1

这个是自己编译rtorrent的教程
作者: kmper    时间: 2010-12-9 11:02
http://item.taobao.com/auction/i ... m_num_id=8711103636

淘宝地址
作者: kmper    时间: 2010-12-9 17:02
up!!!!!!!!!!!!!!!!!!!!!!!

作者: kmper    时间: 2010-12-10 07:25
顶一下,不顶掉得真快
作者: kmper    时间: 2010-12-10 15:00
下降得真快
作者: kmper    时间: 2010-12-11 01:47
又跑到第二页了
作者: kmper    时间: 2010-12-11 18:06
掉的太快了,帖子没有吸引力啊
作者: kmper    时间: 2010-12-12 00:37
掉的太快了,帖子没有吸引力啊
作者: qzc77    时间: 2010-12-12 00:48
第一个:linkstation HS-DHGL,Marvell的88F5182 400mhz,128M DDR内存,1G网卡接口,2个usb2.0,内部硬盘接口为sata,如图,YLJ,成色定义为**。
这个没了?可以上3.5的不
作者: kmper    时间: 2010-12-12 10:05
本帖最后由 kmper 于 2010-12-12 10:09 编辑

本来就是上3.5的盘,不过被我朋友拿去上了2.5的笔记本盘,弄了一个转接架,他说要拿去玩段时间

作者: kmper    时间: 2010-12-12 19:04
upupupupupupupu
作者: qzc77    时间: 2010-12-12 19:39
动手能力太差,光板就算了,最后一个能装硬盘不?
作者: kmper    时间: 2010-12-12 21:46
wrt350是接usb硬盘的,速度比上面两个差远了,看看720p还行,1080p就有点卡了,传输速度只有4m/s,虽然是usb2.0但cpu跟不上,毕竟不是专门拿来做nas的。
作者: kmper    时间: 2010-12-13 12:16
upupupupupupupu
作者: gaolf    时间: 2010-12-13 20:37
想买二个:Linkstation HTGL裸板,有货吧
作者: kmper    时间: 2010-12-13 22:48
就一个就是淘宝的那个。
作者: zhans    时间: 2010-12-13 23:01
等降..........
作者: kmper    时间: 2010-12-14 09:12
upupupupupupup
作者: 路路步兵    时间: 2010-12-14 09:31
提示: 作者被禁止或删除 内容自动屏蔽
作者: kmper    时间: 2010-12-15 02:00
upupupupupupupu
作者: 住小草山    时间: 2010-12-15 14:20
晕 淘宝上已经成交了啊 你怎么还在顶贴啊
作者: gaolf    时间: 2010-12-15 15:06
kmper 发表于 2010-12-13 22:48
就一个就是淘宝的那个。

已经卖了啊
作者: kmper    时间: 2010-12-15 17:04
不好意思,已经被人拍了,我都没注意,赶紧发顺丰过去。




欢迎光临 POPPUR爱换 (https://we.poppur.com/) Powered by Discuz! X3.4