|
|
本帖最后由 yym 于 2011-2-17 18:55 编辑
We have new official UEFI releases for the P8P67
Standard/Pro/EVO/Deluxe/Sabertooth boards today. You will not be able to roll
back to an older UEFI after this update as it contains new firmware and B3
stepping compatibility. Additional UEFI releases for the balance of our P67/H67
product lineup will be released in the near future after qualification testing
is complete (H67/P67M/WS). The next official UEFI update (13xx series) in the
near future will feature additional user enhancements, USB drift fix and updated
Marvell/Intel MEI controller firmware. I highly suggest a Clear CMOS event after
loading the updated UEFI and then entering UEFI to reset your custom settings.
JJ and I will have updated information on memory setups and SSD testing over the
course of the next week.
1. Reset your UEFI to Optimized Defaults,
reboot, enter UEFI and then flash to the new UEFI build.
2. After flash and
restart, shutdown the system before you enter Windows/Linux.
3. Remover the
power cord from the power supply, wait thirty seconds, press Power On button to
clear any remaining charge, clear CMOS for five seconds, reattach the power
cord, power on the system, enter UEFI, set to Optimized Defaults, save and
exit.
4. Enter UEFI, set your system to customized settings based on your
system configuration (RAID, OC, etc), save and exit.
P8P67 Deluxe /
Pro / EVO / Standard / Sabertooth - 1305 -
Change Log -
- Improved OC
performance using Multipliers or Auto Overclocking
- Improved BCLK and DRAM
OC capabilities when enabling the “Internal PLL Overvoltage” option in BIOS.
Note - Sleep/Hibernate will not operate properly due to Intel Specs.
-
Improved USB performance, Improved P67 XMP profile compatibility (please note,
memory with X58/P55 XMP profiles will generally work but is not optimized for
P67 and will usually cause problems when overclocking in several cases)
- Per
Core Save Fixed
- Disable/Enable BT
- Minor Bug Fixes including new Auto
Rules for C-States (C3/C6) when overclocking. If you are overclocking, C-States
will be disabled for enhanced performance.
- Intel RAID will not support
bootable volumes greater than 2.2TB yet, Intel plans a firmware update shortly
to allow this operation. AHCI and IDE are not affected.
- Enhanced AI Suite
II compatibility
Note - These UEFI releases will be on our FTP and
Support Sites shortly.
UEFI 1305 - Pro
http://www.mediafire.com/file/f9ujd5...-ASUS-1305.rar
UEFI
1305 - Standard
http://www.mediafire.com/file/74uqtk...-ASUS-1305.rar
UEFI
1305 - EVO
http://www.mediafire.com/file/uhyxd7...-ASUS-1305.rar
UEFI
1305 - Deluxe
http://www.mediafire.com/file/k84d6d...-ASUS-1305.rar
UEFI
1305 - Sabertooth
http://www.mediafire.com/file/dn39uv...-ASUS-1305.rar
Other
Releases-
P8P67 LE UEFI 1003
Change Log -
- Removes full reset at
POST (double post) on cold boot or auto overclocking routine.
- Improved OC
performance using Auto Overclocking
- Improved BCLK and DRAM OC capabilities
when enabling the “Internal PLL Overvoltage” option in BIOS.
- Minor Bug
Fixes including Auto Rule for C3, C6 being disabled when overclocking and
improved USB compatibility.
- Enabling Internal PLL Voltage will still cause
resume/hibernate issues (Intel related) but we are working with Intel on any
potential workarounds.
UEFI 1003 - http://www.mediafire.com/file/zvx227...-ASUS-1003.rar
Maximus
IV Extreme -
Change Log -
- Improved OC performance using Multipliers
or Auto Overclocking
- Improved BCLK and DRAM OC capabilities when enabling
the “Internal PLL Overvoltage” option in BIOS. Note - Sleep/Hibernate will not
operate properly due to Intel Specs.
- Improved Memory Profiles and
Performance (Elpida Hyper owners, please use Red Slots for best performance, CFG
Lock to Disable should improve SuperPI times)
- Per Core Save Fixed
-
Minor Bug Fixes
Beta - UEFI 1090 -
http://www.mediafire.com/file/kky8cx...-ASUS-1090.rar
|
|
IP卡
狗仔卡
发表于 2011-2-18 07:49
QQ好友和群
收藏
分享
好贴
烂贴
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡