SoftMCCS：显示器 DDC 通道控制软件(可直接调硬件白场和黑场等) 新增2.2版U盘下载

Edison

下载地址：

http://www.entechtaiwan.com/lib/softmccs.shtm

Aiding the development of software controllable displayssoftMCCS is a purpose-built diagnostics and compliance application implemented on top of EnTech's next-generation, licensable softOSD communications library. As a result, softMCCS is not only the fastest and most efficient tool of its kind - it's also the most compatible. The underlying softOSD engine provides communication through the widest variety of GPUs and is compatible with all x86 and x64 versions of Windows, from the original retail release of Windows 95 onwards.

How it works
After establishing effective communication, softMCCS reads each connected display's EDID and MCCS capabilities strings. Within seconds softMCCS presents categorized information, current status and supported controls for each connected display in an easily-recognizable, property sheet metaphor. Beyond it's ability to simultaneously report the status of over 150 VCP code locations in a tested display, softMCCS also provides full control over each supported command and allows individual datagrams to be sent over the DDC/CI channel while viewing raw traffic in an ongoing log window. The speed of the underlying softOSD engine even makes it possible for softMCCS to react, in real-time, to events such as hot-plugging, changes to a tested display's orientation (portrait or landscape), and to synchronize with the use of a tested display's conventional OSD. In addition, softMCCS is the first tool in the world capable of flashing a display's EEPROM entirely through the use of software alone. Provided there is no hardware write-protection, jigs and other programming fixtures are no longer required to update the EDID.

Conformance testing made simple
softMCCS also provides a step-by-step wizard to ease compliance testing and generate useful reports for later analysis, verification or improvement of the display's performance. It is the ultimate tool for hardware designers, firmware engineers and other industry professionals involved in the creation of a new class of softControllable computer displays based on the VESA DDC/CI and MCCS standards.

注意，因为如果你的显示器获支持的话，这个软件是直接对你的显示器内部数据进行控制，你必须具备基本的显示器设置知识。

参考：
http://we.pcinlife.com/thread-1605766-1-1.html（什么是 gain/cut off ）

如果没有校色仪，可以考虑使用单反相机使用自动白平衡对显示器的硬件白场进行校准。
http://we.pcinlife.com/forum-red ... 2889-fromuid-5.html

┣▇▇═─

这个绝对是好贴，必须记号，严重感谢发贴人

咖啡泡泡

最好能有个使用教程那就太感动啦

AeolusK

这个软件不错啊,下来来试一试~

louccc

中文版的下载页面好像没有了，lz能再发下吗？谢谢

yan_zheng

Edison 发表于 2011-3-13 17:09
我下面提供的两个连接就有中文的呀。

基本上就是将显示器各类 OSD 设置搬到 windows 下，在 windows 下对 ...

没有看到有中文呀？

sunnyyang

做个记号，慢慢研究，谢谢

pono

下载不到了，期待版主好心给一个中文版的。。感激不尽。。

Edison

chum79 发表于 2011-3-18 22:17
麻烦问下楼方大人，我的DDC选项后面提示提这个： supported,but from unrecognized
大意是支持，但无法识别 ...

试试看后面给出的 2.2 版。

SoftMCCS 从 2.4 版开始只提供合作厂商的支持。

nek

这软件的功能暴强 ..

Edison

第一句的 BIAS 那里吧？我改回 Gain 了。

bull

Edison 发表于 2011-3-13 10:59
下载地址：

http://www.entechtaiwan.com/lib/softmccs.shtm

你的参考不懂的还是不懂，懂的人看了没用。
就不会综合一下么、、、、
而且第一句话好像就错了

GZ网友

谢谢爱迪生版主

Edison

a85876856 发表于 2011-3-15 21:30
哎 太悲剧了 这显示器看视频 人得皮肤 都像黄金脸 黄黄得 太不舒服了  真不知道怎么办了

调来调去 都没什 ...

http://we.pcinlife.com/forum-red ... 2889-fromuid-5.html

a85876856

哎 太悲剧了 这显示器看视频 人得皮肤 都像黄金脸 黄黄得 太不舒服了  真不知道怎么办了

调来调去 都没什么用  

Edison

和操作系统无关，我这里 post 的两张截图都是 windows 7 x64 下的。

找个图床吧：
http://www.divshare.com/

sinraver

Edison 发表于 2011-3-15 14:31
左上角的显示器图标对应的下拉列表里显示是 DELL 3008 就可以了。

左上角的显示器图标对应的下拉列表里显示：就是只有一项显示“DELL DEL4035”，晕，是不是和win7 U x64有关，导致不能正常辨认？论坛怎么上传不了图片？55K的gif也不行。。。

Edison

sinraver 发表于 2011-3-15 12:50
请问在哪查看规格表啊，我下载安装了2.5版，支持dell 3008wfp吗？

我在win7 U x64下用，软件开始就把 ...

左上角的显示器图标对应的下拉列表里显示是 DELL 3008 就可以了。