POPPUR爱换

标题: LSI MSM(MegaRAID Storage Manager) 11.08.03.00_RC [打印本页]

作者: per1-q1222 时间: 2011-12-21 07:34
标题: LSI MSM(MegaRAID Storage Manager) 11.08.03.00_RC
location: ftp0.lsi.com
account: tsupport
password: tsupport

位址在
ftp://tsupport@ftp0.lsi.com/outgoing_perm/MegaRAID/11M08P3/Windows_MSM_11.08.03.00_RC.7z
只有Windows版本...
更新項目未知...
不過事件過濾器(Event Filter)被拿掉了..

有興趣者測試..
看有甚麼改變..

作者: stephenmaxmax 时间: 2011-12-21 09:39
昨晚还ftp上看了来着，，，一直木发现新版本。。
原来是换目录了，，不在outgoing_temp目录放了。。

作者: per1-q1222 时间: 2011-12-21 18:10

stephenmaxmax 发表于 2011-12-21 09:39
昨晚还ftp上看了来着，，，一直木发现新版本。。
原来是换目录了，，不在outgoing_temp目录放了。。

兄弟..
問個問題..
你有試過supermicro新版的IPMIView嗎?..
我用了很火大..
iKVM CONSOLE很容易當掉..

作者: per1-q1222 时间: 2011-12-21 18:15
很好很強大..
這版本找不到Power saving option..

作者: stephenmaxmax 时间: 2011-12-21 18:18

per1-q1222 发表于 2011-12-21 18:10
兄弟..
問個問題..
你有試過supermicro新版的IPMIView嗎?..

等我回家后去看看用的是什么版本~

作者: per1-q1222 时间: 2011-12-21 18:18

stephenmaxmax 发表于 2011-12-21 18:18
等我回家后去看看用的是什么版本~

f/w已經到2.60版了..

作者: stephenmaxmax 时间: 2011-12-21 21:03
本帖最后由 stephenmaxmax 于 2011-12-21 21:04 编辑

per1-q1222 发表于 2011-12-21 18:18
f/w已經到2.60版了..

IPMI View的版本是2.9.1.111027
fw是2.5

orz我去超微网站上找一下~

作者: per1-q1222 时间: 2011-12-21 21:41

stephenmaxmax 发表于 2011-12-21 21:03
IPMI View的版本是2.9.1.111027
fw是2.5

IPMIView新版已經到2.9.3了

作者: jimmyjin 时间: 2011-12-21 22:29

per1-q1222 发表于 2011-12-21 18:15
很好很強大..
這版本找不到Power saving option..

发现关键字，又是可以Ignore的一版

作者: idolclub 时间: 2011-12-22 01:08

per1-q1222 发表于 2011-12-21 18:15
很好很強大..
這版本找不到Power saving option..

Manage Power Save Settings 選項仍然存在

作者: per1-q1222 时间: 2011-12-22 06:15

idolclub 发表于 2011-12-22 01:08
Manage Power Save Settings 選項仍然存在

你從哪裡看到..
我找不到..

作者: per1-q1222 时间: 2011-12-22 06:37
原來更新項目躲在readme裡面:

============
Known Issues
============
N/A

=============
Fixes/Updates
=============
11.08.03.00
Enhancements:

1) LSIP200148629       PERC 8.1:  End to End Data Protection (EEDP)

Defects:

1)LSIP200209871          MSM reports wrong location for LBA over 2 TB
2)LSIP200210817          (HSA0373) MSM : PCI ID contents of event ID 0?irmware initialization started?is incorrect.
3)LSIP200210818          (HSA0374) MSM : Unable to report the event in /var/log/messages.
4)LSIP200199123          PD Reset warning event message is not getting generated in MSM for SATA PD only
5)LSIP200210824          (RW LSIP200210016) MSM show blank  the description in event
6)LSIP200211037          (HSA0376) MSM : Displayed Month is incorrect during Oct-Nov when PatrolRead, CC is running.
7)LSIP200210581          (RW LSIP200209669) MSM JLogger always showing PHY value as 0
8)LSIP200210564          (RW LSIP200210044) Getting empty events in MSM when SAS data cable is inserted or removed from controller
9)LSIP200211295          MSM upgrade fails due to CLI version difference in Linux
10)LSIP200211598       MSM needs to update the Suppport Link and Help Link from http://www.LSICorp.com to http://www.LSI.com
11)LSIP200209673       Invader:- Flashing 16MB FW with MSM hits PROGRAM(SRR0/1,ESR) exception
12)LSIP200210956       Maximum allowed unconfig good drives on a controller displays a decimal number
13)LSIP200210757       (RW LSIP200210020) MSM has some typing errors in making unconfig good
14)LSIP200211089       MSM has many typing, grammar and description errors in simple creation of VDs.
15)LSIP200185624       MACON: megacli gets  installed on installing RWC2 instead of CmdTool

11.08.02.07
Defects:
1)LSIP200211237          MSM is allowing dimmer switch features for IBM
2)LSIP200210567       (RW LSIP200209119) Readme file has some junk letters in RWC2 and MSM in 11.08.02.03 builds
3)LSIP200210726          Default value for Disk Cache Policy during VD creation changes after first VD is created.
4)LSIP200200126          Snapshot feature set to  take the snapshot for every reboot  is not generating the snapshot view.
5)LSIP200196755          Cant create VD with HSP if trying to create VD using simple mode with different PD size in MSM

11.08.02.06
Defects:
1)LSIP200209303 Doesn't allow to create DHSP with specific application

11.08.02.05
Defects:
1)       LSIP200209487          Learn Properties Dialog box does not complete message
2)       LSIP200209652          MSM is not supposed to check the popup status if it is not installed
3)       LSIP200210020          MSM has some typing errors in making unconfig good
4)       LSIP200209405          (HSA0365) MSM : Severity Level of Event is not changeable.
5)       LSIP200209498          Battery Predictive Failure message displays twice in MSM / Reported as "not Required"
6)       LSIP200209406          (HSA0366) MSM : Fails to login to other MSM client.
7)       LSIP200209119          Readme file has some junk letters in RWC2 and MSM in 11.08.02.03 builds
8)       LSIP200209669          MSM JLogger always showing PHY value as 0
9)       LSIP200210044          Getting empty events in MSM when SAS data cable is inserted or removed from controller
10)       LSIP200199561          Needs attention at status properties under dashboard tab in MSM is showing irrespective of VD/PD state
11)       LSIP200209293          Suspend all operation in MSM under group show progress is not suspending PR
12)       LSIP200210016          MSM show blank  the description in event
13)       LSIP200197065          (Defer LSIP200184971) In the Event description field on remote MSM for the ESXi 5.0 server inaccurate progress is report

作者: per1-q1222 时间: 2011-12-22 06:40
大概是bug吧...
[attach]1723623[/attach]

作者: idolclub 时间: 2011-12-22 14:14

per1-q1222 发表于 2011-12-22 06:40
大概是bug吧...

可嘗試完全移除舊版本後再重新安裝一次

[attach]1723979[/attach]

作者: per1-q1222 时间: 2011-12-22 18:06

idolclub 发表于 2011-12-22 14:14
可嘗試完全移除舊版本後再重新安裝一次

依然不見功能..
你是哪個f/w?

作者: idolclub 时间: 2011-12-22 19:17

per1-q1222 发表于 2011-12-22 18:06
依然不見功能..
你是哪個f/w?

12.12.0-0048

作者: stephenmaxmax 时间: 2011-12-22 21:50

per1-q1222 发表于 2011-12-21 18:10
兄弟..
問個問題..
你有試過supermicro新版的IPMIView嗎?..

我更新之后用起来挺正常的~木有发现不稳定

作者: stephenmaxmax 时间: 2011-12-22 21:52
我装了那个msm，也没有Power saving option
不过无所谓了，我早都用不到这功能了，硬盘起起停停的会死的更快

欢迎光临 POPPUR爱换 (https://we.poppur.com/)