POPPUR爱换

 找回密码
 注册

QQ登录

只需一步,快速开始

手机号码,快捷登录

搜索
查看: 2755|回复: 12
打印 上一主题 下一主题

LSI LSISAS2108/2008 new f/w v12.12.0-0124 / 20.10.1-0119

[复制链接]
跳转到指定楼层
1#
发表于 2012-10-18 04:30 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
本帖最后由 per1-q1222 于 2012-10-18 04:30 编辑

LSISAS2108
http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/MERGED_12.12.0-0124_SAS_2108_FW_Image_2.130.363-1846.zip
Current Firmware Package (with CacheCade Pro 2.0):  12.12.0-0124 (Merged)
Firmware 2.130.363-1846
Medusa_Expander SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00
NVDATA 2.09.03-0039
BootBlockCommon 09.250.01.219
BootBlock 2.02.00.00-0000
ROMENV 1.08
WebBIOS 6.0-51-e_47_Rel
PCLI 4.04.20
UEFI_Driver 0x05180000
Hii 1.32.00
BIOS 3.25.00
FCODE 4.12.05.00
Firmware:
=========
SCGCQ00263446 - (Closed) - Support SGPIO SideBand with/without Activity
SCGCQ00296744 - (Closed) - enable Emergency hotspare capability for channel
SCGCQ00323446 - (Closed) - Add NVDATA support to make 512 Emulated drive support as configurable for customers.
SCGCQ00286613 - (Closed) - ER corresponding to LSIP200230920
SCGCQ00290530 - (Closed) - Band Gap charging for iBBU08
SCGCQ00288679 - (Implemented) - ER corresponding to LSIP200122939
SCGCQ00290531 - (Closed) - Learn Improvement - Do not take Command block if there is no LD for which cache policy will change
SCGCQ00308820 - (Closed) - Bbumode is 5 instead of 0 for iBBU07
SCGCQ00311062 - (Closed) - Fatal firmware error: Line 1842 during FC import
SCGCQ00284536 - (Closed) - 9260 controller VD goes offline during Slow/Full/Foreground Initialize with 3TB Seagate SED SAS drives
SCGCQ00301160 - (Closed) - Limited band Charging for all OEMs
SCGCQ00298687 - (Closed) - Code Review defect to handle SA_INVALID_FIELD_IN_CDB
SCGCQ00292830 - (Closed) - FW correctly removes entries in the SBBM table by properly shifting the entries to the right.
SCGCQ00292943 - (Closed) - Allocate BBLog for iMR Initally during boot up
SCGCQ00295474 - (Closed) - BBU mode is set to 5 for BBU07 in ctrl-h
SCGCQ00294981 - (Closed) - FW Montask on every boot
SCGCQ00252606 - (Closed) - Drive fails after I/O timeout and subsequent target reset during continuous firmware flash.
SCGCQ00295130 - (Closed) - spare pointer is incorrectly used in MR_CONFIG_DATA
SCGCQ00290512 - (Closed) - Checked in the review comment for SCGCQ00286613
SCGCQ00313883 - (Closed) - Battery continually stating Battery Yearly Deep Discharge Relearn Pending. Please Initiate a manual Relearn
SCGCQ00319537 - (Closed) - System hang on OEM machine with a critical boot message
WebBIOS:
========
SCGCQ00295052 (DFCT) - Change BBU Mode description for Liberator batteries.
HII:
====
SCGCQ00294957 (DFCT) - Manage SSD Caching is showing all the VD's in the list in HII.

LSISAS2008
http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/MERGED_20.10.1-0119_SAS_2008_FW_Image_APP-2.130.364-1847.zip
Current Firmware Package:     20.10.1-0119  (Merged)
Firmware 2.130.364-1847
WebBIOS 4.0-59-e_48-Rel
ROMENV 1.08
BootBlock 2.02.00.00-0001
NVDATA 3.09.03-0043
PCLI 03.02.20
Hii 1.31.00
UEFI_Driver 0x05180000
FCODE 4.12.05.00
BIOS 4.31.00
Firmware:
=========
SCGCQ00308820 - (Closed) - Bbumode is 5 instead of 0 for iBBU07
SCGCQ00311062 - (Closed) - Fatal firmware error: Line 1842 during FC import
SCGCQ00284536 - (Closed) - 9260 controller VD goes offline during Slow/Full/Foreground Initialize with 3TB Seagate SED SAS drives
SCGCQ00301160 - (Closed) - Limited band Charging for all OEMs
SCGCQ00298687 - (Closed) - Code Review defect to handle SA_INVALID_FIELD_IN_CDB
SCGCQ00292830 - (Closed) - FW correctly removes entries in the SBBM table by properly shifting the entries to the right.
SCGCQ00292943 - (Closed) - Allocate BBLog for iMR Initally during boot up
SCGCQ00295474 - (Closed) - BBU mode is set to 5 for BBU07 in ctrl-h
SCGCQ00294981 - (Closed) - FW Montask on every boot
SCGCQ00252606 - (Closed) - Drive fails after I/O timeout and subsequent target reset during continuous firmware flash.
SCGCQ00284230 - (Closed) - Megamon during Injecting errors to VD with 512e PDs on iMR controller
SCGCQ00295130 - (Closed) - spare pointer is incorrectly used in MR_CONFIG_DATA
SCGCQ00290512 - (Closed) - Checked in the review comment for SCGCQ00286613
SCGCQ00313883 - (Closed) - Battery continually stating Battery Yearly Deep Discharge Relearn Pending. Please Initiate a manual Relearn
SCGCQ00319537 - (Closed) - System hang on OEM machine with a critical boot message
SCGCQ00263446 - (Closed) - Support SGPIO SideBand with/without Activity
SCGCQ00296744 - (Closed) - enable Emergency hotspare capability for channel
SCGCQ00323446 - (Closed) - Add NVDATA support to make 512 Emulated drive support as configurable for customers.
SCGCQ00286613 - (Closed) - ER corresponding to LSIP200230920
SCGCQ00290530 - (Closed) - Band Gap charging for iBBU08
SCGCQ00288679 - (Implemented) - ER corresponding to LSIP200122939
SCGCQ00290531 - (Closed) - Learn Improvement - Do not take Command block if there is no LD for which cache policy will change
WebBIOS:
========
SCGCQ00295052 (DFCT) - Change BBU Mode description for Liberator batteries.


2#
发表于 2012-10-18 09:15 | 只看该作者
老大,请问这个和H700通用么?H700的最新固件是啥版本呢?
回复 支持 反对

使用道具 举报

3#
发表于 2012-10-19 02:06 | 只看该作者
hammer999 发表于 2012-10-18 09:15
老大,请问这个和H700通用么?H700的最新固件是啥版本呢?

不通用
H700最新固件是A12
不過你的系統要是屬於微軟體系更新到 A10即可
A11 A12是針對LINUX系統的更新,DELL也只附LINUX使用的更新韌體
回复 支持 反对

使用道具 举报

4#
发表于 2012-10-19 22:01 | 只看该作者
saila 发表于 2012-10-19 02:06
不通用
H700最新固件是A12
不過你的系統要是屬於微軟體系更新到 A10即可

谢谢兄弟的回答。我刚才看了看,我的H700好像还是A00的固件,现在在用着阵列。是否有必要升级呢。
回复 支持 反对

使用道具 举报

5#
发表于 2012-10-22 16:43 | 只看该作者
升级没问题,我已经升级了!担心的先备份数据
回复 支持 反对

使用道具 举报

6#
发表于 2012-10-22 22:01 | 只看该作者
兄弟升级后,是感觉性能或者稳定性上有啥变化么
回复 支持 反对

使用道具 举报

7#
发表于 2012-10-23 13:19 | 只看该作者
藐视没啥变化,反正没有感觉出来

回复 支持 反对

使用道具 举报

8#
发表于 2012-10-27 08:41 | 只看该作者
lsi網站 這版Firmware被拿掉了,ms driver也換成之前的舊版
不知道是什麼問題
回复 支持 反对

使用道具 举报

9#
发表于 2012-10-27 21:10 | 只看该作者
saila 发表于 2012-10-27 08:41
lsi網站 這版Firmware被拿掉了,ms driver也換成之前的舊版
不知道是什麼問題

新firmware有機會導致VD消失,幾天前已經撤了,已升級的建議刷回舊版

回复 支持 反对

使用道具 举报

10#
发表于 2012-10-27 23:22 | 只看该作者
本帖最后由 asif2001 于 2012-10-27 23:23 编辑
idolclub 发表于 2012-10-27 21:10
新firmware有機會導致VD消失,幾天前已經撤了,已升級的建議刷回舊版

舊版指的是 23.7.0-0035 這系列的嗎?

LSI 2208 的f/w,DRIVER也都被撤掉了....

回复 支持 反对

使用道具 举报

11#
发表于 2012-10-28 02:23 | 只看该作者
idolclub 发表于 2012-10-27 21:10
新firmware有機會導致VD消失,幾天前已經撤了,已升級的建議刷回舊版

原來如此,感謝說明
回复 支持 反对

使用道具 举报

12#
发表于 2012-10-29 14:10 | 只看该作者
已经 刷回旧版的了!折腾呀,下次要等等才升级!
回复 支持 反对

使用道具 举报

13#
发表于 2012-10-29 21:03 | 只看该作者
asif2001 发表于 2012-10-27 23:22
舊版指的是 23.7.0-0035 這系列的嗎?

LSI 2208 的f/w,DRIVER也都被撤掉了....

可換回現時LSI網站上的版本
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

广告投放或合作|网站地图|处罚通告|

GMT+8, 2025-3-5 03:07

Powered by Discuz! X3.4

© 2001-2017 POPPUR.

快速回复 返回顶部 返回列表