POPPUR爱换

 找回密码
 注册

QQ登录

只需一步,快速开始

手机号码,快捷登录

搜索
查看: 1326|回复: 3
打印 上一主题 下一主题

希捷硬盘更新固件后的问题!!ST31000333AS

[复制链接]
跳转到指定楼层
1#
发表于 2009-3-22 21:27 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
更新固件后用EVEREST查看有一个功能取消了,device configuration overlay网上查了一下好象叫设备配置覆盖
有谁知道这个是做什么用的,对硬盘有什么影响?具体看更新固件前后截图,注意蓝色框内。
2#
发表于 2009-3-22 21:39 | 只看该作者
A hidden area on many of today’s hard disk drives (HDDs) is the device configuration overlay (DCO). The DCO allows system vendors to purchase HDDs from different manufacturers with potentially different sizes, and then configure all HDDs to have the same number of sectors. An example of this would be using DCO to make an 80-gigabyte HDD appear as a 60-gigabyte HDD to both the operating system (OS) and the BIOS.

Usually when information is stored in either the DCO or host protected area (HPA), it is not accessible by the BIOS, OS, or the user. However, certain tools can be used to modify the HPA or DCO. Given the potential to place data in these hidden areas, this is an area of concern for computer forensics investigators. An additional issue for forensic investigators is imaging the HDD that has the HPA and or DCO on it. While certain vendors claim that their tools are able to both properly detect and image the HPA, they are either silent on the handling of the DCO or indicate that this is beyond the capabilities of their tool.
回复 支持 反对

使用道具 举报

3#
发表于 2009-3-23 01:48 | 只看该作者
硬盘出吗
回复 支持 反对

使用道具 举报

4#
发表于 2009-3-23 12:29 | 只看该作者
看不懂{wink:]
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

广告投放或合作|网站地图|处罚通告|

GMT+8, 2025-8-30 17:48

Powered by Discuz! X3.4

© 2001-2017 POPPUR.

快速回复 返回顶部 返回列表