|
|
本帖最后由 per1-q1222 于 2010-12-26 22:36 编辑
目前LSI已經跟我確認這方面問題...
要求我回報相關資訊了...
I was able to re-create the issue with our lab systems. We will need to escalate the case to our Level 3 Technical Support Engineers so they may provide the information to our development team for a fix in the next release.
Because you have purchased a new Retail card, we will need issue a new case number (2-280283986) and close the old (2-277986980). Please refer to Service Request number #2-280283986 moving forward.
In order to escalate this case to our Level 3 engineers, we will require total system information. Please provide the following:
We will need the serial number off of the card itself or the box it came in. This serial number should start with a letter followed by 7-10 numerical digits (ex/SVxxxxxxx, Nxxxxxxx, Pxxxxxxx). If you are unable to identify the correct serial number, please send all of the numbers on white stickers from the controller.
Also, please provide the following system information:
Controller: 9260-8i
Driver Version:
Firmware Version:
Operating System:
Make/Model of Motherboard:
Make/Model of Drives: Seagate SAS ST31000640SS
System configuration (RAID 0, 1, 10, 5, etc.): Issue occurs regardless of configuration
Once we receive this information, we will verify entitlement and assign to the next available Support Engineer.
目前已回報..
問題就是這個next release要多久阿...
|
|
IP卡
狗仔卡
发表于 2010-12-25 09:48
显身卡
楼主