x-fi真正的硬件双d硬解码驱动

zuiniubi

因vista sp1 的出现，硬件双d解码似乎可以再次实现，一些爱好者的x-fi全功能驱动提前出炉，本人所见内容皆出自创新官方论坛，略作翻译，与诸君分享。
4 ~2 L: E7 F9 N9 j! J' p1 f
Sound Blaster X-Fi series Vista Support Pack - Compiled on Feb 13 2008 by Daniel Kawakami
支持vista x86及x64版本（部分功能需要的实现需要升级之sp1）
支持所有的硬件 CA20K DSP芯片(含oem版本）
$ l( H6 W3 A3 c不支持下列设备
x-fi xtreme audio及pci-e系列的x-fi
; g8 h. X+ y  |5 A' a$ i, e
* T/ p5 s7 m6 N2 u3 m完整安装至下列组件
0 j1 d" T" W& j$ m& P) c, L- X-Fi series driver 2.15.0004 (the latest)
- APO Interface Module 1.30.00
- Audio Console 2.50.10
4 ~, U3 M) D0 S7 H: g- MediaSource DVD-Audio Player 2.00.76 (32-bit only)
/ U2 _, o. K% t$ ~" T( y# P, u- SoundFont Bank Manager 3.20.20

/ Q+ f7 C* g/ [9 g' C: x) V
此非官方驱动版本所囊括的独特功能
% X6 [( N. b8 p2 j8 Z0 ` Dolby/DTS decoder (working on 32-bit/64-bit, 要求Windows Vista Service Pack 1)- DVD Audio (仅支持32-bit )
- Hardware MIDI synthesizer (包括 2Mb, 4Mb and 8Mb SoundFont banks)

9 v$ b# V) |& u1 s+ j8 t, c9 r
7 A$ J$ p- j* W; X- [
已知问题
驱动安装过程中的系统安全警报
-当出现“windows不能验证该驱动的发行者”时，请点选“安装此驱动”并继续。
$ E- n4 Y2 k6 v1 o  G: g! ^WaveRT Pull 模式会被默认激活
-似乎不会导致问题产生，但若需永久废置，请按如下步骤操作。
运行注册表，找到此键值母项：HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass
/ Y5 G# u" V/ x# s搜索“EnableWaveRTPullMode”，将其删除之并重启计算机。
* v9 T- l4 W. R5 w! S! s2 X1 ?  v0 ^关于更多的WaveRT信息, 请参照:
- d1 I' \3 s4 c$ M; G4 |/ lhttp://www.microsoft.com/whdc/device/audio/wavertport.mspx
" I$ g1 W9 {9 L1 ~9 E/ s- MediaSource DVD-Audio不支持vista x64
8 b' C0 l/ n: A$ G-内置解码器（需要更新至sp1）
下载地址 ：http://files.filefront.com/SBXF+VTDRV+LB+2+15+0004Aexe/;9627380;/fileinfo.html

wsx

A1 A2论坛上也有相应的驱动

us.creative.com里面的论坛

雪中城主

:huh: 用０３的飘过

wsx

Sound Blaster Audigy series Vista Support Pack - Compiled on Feb 14 2008 by Daniel Kawakami

. I+ H- w6 t- I+ e

: U; T  }) s" W  L% L! RSupports both 32-bit and 64-bit versions of Windows Vista (including Service Pack 1).


Supports all Audigy card with a Hardware EMU10K2 DSP chipset (OEM / Retail models):

- Audigy (including ES, MP3+, X-Gamer and Platinum)
- Audigy 2 (including Value, Platinum and Platinum Ex)
- Audigy 2 ZS (including Platinum and Platinum Pro)
- Audigy 4 (including SE and Pro)
6 S2 j* ]/ r& n0 Q7 s5 c8 c6 P% g- Audigy 2 ZS Notebook (PCMCIA) - Uses software MIDI emulation that does not (currently) work in Vista.
+ @, w. ^. S- @) ]. k1 {" D  K
3 m& `: I3 ]( E$ e: t% D% G" b/ d
Does NOT support the following OEM / Retail models:

- Host / software-based cards including Audigy LS / SE / Value, Audigy 2 SE, Live! 24-bit)
5 N- ]0 h- Q2 @# c1 I* F6 ~- any external Audigy soundcards
5 Y3 N" J' T7 p/ z( O
+ W4 l# F! a: N- E% V2 y  W* g& |

Integrated setup program to install the following items:

/ q) x. M9 f! e9 U+ e7 W- Audigy series driver 2.15.0004 (the latest X-Fi driver)
- APO Interface Module 1.30.00
6 ]' P6 Q& |: F/ Q- Audio Console 1.20.57 (including Graphic Equalizer)
" Z: ~. ]/ T! N; B% S- Audio Center 1.00.09
- EAX Settings 1.10.05
- MediaSource DVD-Audio Player 2.00.76 (32-bit only)
- SoundFont Bank Manager 3.20.20
- Speaker Settings 2.00.60
' ]: `' u) Q& h% l. ?3 K! f8 M  h( |
9 z* T2 |8 ~, J- S' c' |9 ~

Exclusive features in this unofficial driver:
" u- p/ [3 a* w' H5 V
! z7 m! Q0 L7 Y- Equalizer
- CMSS and Stereo Surround with Stereo focus control
- Advanced EQ and Special FX available (see notes below)
1 a- H  t: o3 ^5 q9 y" u! f- Dolby/DTS decoder (working on 32-bit/64-bit, requires Windows Vista Service Pack 1)
- DVD Audio (32-bit only)
- Hardware MIDI synthesizer (includes 2Mb, 4Mb and 8Mb SoundFont banks)
- 4 Gb RAM approved (tested on Intel C2D E6400, Gigabyte 965P-DS3, 4Gb RAM)
! z! l% ?( [! l5 y$ D: l
& i) l' u( x$ m
) f" `1 s1 U/ y3 T
- Y1 W2 i/ T9 y" tRelease notes / Known issues:

7 S; Y' M9 c! D1 C8 e8 u* {
- Windows Security warning during driver installation

When prompted with "Windows can't verify the publisher of this driver software", choose "Install this driver software anyway".

9 F/ _. K4 k; o
  b3 W# A2 l- D4 n; ]. ~- Speaker configuration and CMSS settings are not synchronized
After making changes in Audio Console, you must change the settings in Vista's Speaker configuration -> Speaker setup and in Audio Center. If you don't need Equalizer, try the new v2.15.0004C that fixes this issue.
% C6 B! g  K8 R7 R4 r0 j: g
1 h7 d1 R* b/ w+ w& L, _$ `; f
- EAX effects, Advanced EQ and Special FX
+ N- {' }, f. Z4 r; z6 B$ ^. K
EAX effects only work in 4.1, 5.1 e 7.1 speaker settings.

Advanced EQ and Special FX only work in 2.1 speakers or Headphone settings.
7 F* A' U1 J' Z; b7 R" X
$ H$ u6 N% ^8 O6 [( n$ u4 r
6 z  G' o3 P4 A; u5 S$ V- EAX effects, Advanced EQ and Special FX (Using SPDIF Out)
All effects work properly, but when you restart your computer, the Tone settings (Bass and Treble) are not applied.
Just readjust one of the controls one time per boot.


- MediaSource DVD-Audio Player requires Audigy 2 or better
. q/ p) `* C8 ^# n) h$ J  x3 BDo not install if you have the first Audigy model.

8 e7 f/ Q& R( iThe application does not support Windows Vista 64-bit and setup will close with an error message.

$ s# \7 O- g# K3 S
& |5 _  f' }& J7 S% Q% r
' y0 p3 V6 w' \+ w0 L
/ @" p# f3 k/ c' P8 v( `8 \- WaveRT Pull Mode enabled by default
1 @  \8 D; f# p% g: pDoes not seem to cause any problems, but if you ever need to disable it, follow these steps:
! |. b. X; _0 X7 Z3 z9 o& z2 @- run the Registry Editor (Regedit) and open the following registry tree:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass
- select Search (or press the F3 key) and type EnableWaveRTPullMode, deleting the value when found.
7 x7 c3 F$ O. YRestart the computer.

. G  e. H( g2 \% Q* B8 X1 Q; sFor more information on WaveRT, access:
. p( p  o& b. ^5 o% Chttp://www.microsoft.com/whdc/device/audio/wavertport.mspx

% P# n: p- Z7 l3 j& v  q  w% K! U8 E
6 x2 I% S! D% o+ u1 b
( D5 P! r6 X0 u- Built-in Decoder (requires Windows Vista Service Pack 1)
' o3 e5 F( j4 p9 e1 s7 rTo use the built-in decoder, make sure it is enabled in Audio Console.

Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of
! M  C; Y- ?! @+ Z8 Uyour player and then configure the AC3/DTS filter to send the stream
through SPDIF.
+ z2 j$ q8 f, t) C: H% b
When you restart your computer, the Tone settings (Bass and Treble) are not applied.
4 Z9 _+ V* [" z1 b! r) _8 {% jJust readjust one of the controls one time per boot.
( Z( _" F9 n2 r3 G6 O* _" w  G
3 G. r  n; z) J( c
- There is no sound in games with OpenAL support or using Creative ALchemy

Disable Advanced EQ and Special FX selecting "No effects" before running the game or program.

8 B3 X" h% {9 [7 Z# F1 D) B) ?/ F
' L' B; q) E7 U$ k$ D- j- Equalizer settings are lost

It happens after you run a game with OpenAL support or using Creative ALchemy. This issue also occurs in Windows XP, so it is not specific to this Windows Vista driver.
' ?6 G" h. V8 N, v& C

" }. I( W# j" H( M& K) {% R- Windows Vista MIDI Device Configuration Utility
Use this utility to change the MIDI playback device for 32-bit and 64-bit applications.
The driver installer automatically selects the first hardware MIDI synthesizer found.
5 y& g9 n( [' u" e* {
Note: The Audigy 2 ZS Notebook (PCMCIA) does not have a hardware synthesizer.
0 K; C6 H2 g$ [" f8 B$ E; r( h
% q# U1 h5 u& ]7 c1 Z9 [
- Creative Audio Center
3 k( ^! }5 D# h/ v5 h9 M
This application lets you to use CMSS and Stereo Surround features Creative has decided not to make available for Audigy cards.
A headphone optimized CMSS mode is used when you select the "Optimize speaker output for headphones" option.

$ l; j' N; O/ P6 e: D# w6 C"Bass Settings" button was disabled, use the "Speaker Settings" application to adjust Bass related settings.
& L5 K* I* j# |9 H


1 v6 C  F2 O  FSome screenshots:

% Q/ g" l: X* A- Equalizer:


0 |/ g5 a; u8 E1 I- Stereo Surround:
6 F( \7 {7 k  q, F6 o1 s

- Choose "Optimize speaker output for headphones" for improved CMSS (Bass Settings doesn't work, use Speaker Settings instead):
7 n4 G3 E% A$ P- t6 H  z$ V

+ u) r% {, D! \; z- Working Stereo Focus control for CMSS or Stereo Surround:
# u1 c7 s# e: P9 `, p& y/ B' M7 l: t

8 d" H' E& J5 E; K* O3 W- |- Decoder:


8 m9 S3 z" q8 O" o, H* O- Mplayer Classic: select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of
your player
7 k2 ]% H3 R  H: C! {

- Mplayer Classic: configure the AC3/DTS filter to send the stream through SPDIF
; c, U2 C9 l& c! d- D7 j
4 X9 \5 n3 [' i8 j* A2 k2 t
0 ~7 u0 @) [' V( ^5 Q- Hardware MIDI:
. h2 X( @. b) x( ~5 \7 m5 r
! j2 M9 n2 ]( O" W& f2 s

Download from: FileFront (76.4 Mb)
) m- x. B1 L" x/ [( `" H5 W% J' rPlease donate if you can.
( k: h8 }4 D" @/ h( c5 E
下载
/ q/ r! B6 _/ C5 n/ T" K' K) \http://files.filefront.com//;9629399;/