LSISAS2008 MegaRAID Firmware v20.12.1-0150 is released

per1-q1222

http://www.lsi.com/downloads/Pub ... _2.130.394-2550.zip

Version Numbers:       
===============

Current Firmware Package:     20.12.1-0150  (4.11)
Firmware 2.130.394-2550
WebBIOS 4.0-60-e_49-Rel
ROMENV 1.08
BootBlock 2.02.00.00-0001
NVDATA 3.09.03-0052
PCLI 03.02.20
Hii 1.37.00
UEFI_Driver 0x05270000
FCODE 4.12.05.00
BIOS 4.36.00

Previous Firmware Package:     20.11.1-0137  (4.10 P1)
Firmware 2.130.384-2291
WebBIOS 4.0-59-e_48-Rel
ROMENV 1.08
BootBlock 2.02.00.00-0001
NVDATA 3.09.03-0050
PCLI 03.02.20
Hii 1.37.00
UEFI_Driver 0x05270000
FCODE 4.12.05.00
BIOS 4.35.00




Bug Fixes and Enhancements:
===========================
Firmware:
SCGCQ00395533 - (Closed) - CC schedule is changed to an unjust date by "Configuration Clear"
SCGCQ00349837 - (Closed) - Sequential Read performance is less on CacheCade associated LD's.
SCGCQ00396335 - (Closed) - 9260-16i's drive locate/fault LED header is not working properly.
SCGCQ00361312 - (Closed) - MR4.7 FW reports detected problem with iBBU07 charging circuit
SCGCQ00360938 - (Closed) - When attempting to secure LD during RLM, receive option to secure LD, LD not secured (message incorrect/misleading.)
SCGCQ00392840 - (Closed) - Prevent overtemp warnings while charging
SCGCQ00399692 - (Closed) - Modify MR fw to eliminate four second window where drive swap is not recognized.
SCGCQ00406955 - (Closed) - Prevent data correction in pagefil.sys to happen during Check Consistency after heavy I/O test.
SCGCQ00422473 - (Port_Complete) - When a Cachecade PD marked as missing is reused to make Cachecade VD IO integrity error is observed.
SCGCQ00432851 - (Port_Complete) - Saved Release Note DataSLIB returning bad data as good data after host reboots
SCGCQ00436896 - (Port_Complete) - Minimum Capacity needed for relearn is incorrect in 2208 MR FW
SCGCQ00447652 - (Port_Complete) - Potential data integrity issue seen when IOs are in progress and cachecade PD is marked as missing and reused to create another SSC VD.
SCGCQ00448732 - (Port_Complete) - Card Running iMR Machine Checks when Requesting Host Memory
SCGCQ00449871 - (Port_Complete) - Verify drive reinsertion within/before drive-removal-delay setting -verify discovery (Without IO)
SCGCQ00414148 - (Port_Complete) - Firmware returns invalid data in OOB packet
SCGCQ00437920 - (Port_Complete) - Data Miscompare found while running I/O overnight with degraded virtual drives
SCGCQ00439197 - (Port_Complete) - Potential data integrity issue with R5 cachedIO mode
SCGCQ00421933 - (Port_Complete) - IO integrity error seen after Source VD associated with CacheCade VD is forcibly unblocked
SCGCQ00423725 - (Port_Complete) - Sequential Read performance is less on CacheCade associated LD's.
SCGCQ00421891 - (Port_Complete) - Assertion failure in ../../raid/raidpci.c at line 8323 while running IO with cable pull/push.
SCGCQ00421960 - (Port_Complete) - During rebuild on PRL11 CacheCade VD and rebuild on RAID6 Source VD IO integrity error is seen.
SCGCQ00450056 - (Port_Complete) - Source VD gets blocked on OCR after one PD removal from R0 WB CCVD and reuse of that PD in creating another CCVD.

WebBIOS:
SCGCQ00386062: Unable to read the correct value of controller property "Boot Error Handling" after changing

NVDATA:
SCGCQ00393134: Change the showSgpio activity to 0
SCGCQ00350995: Requested changes from Channel Factory Defaults for MFC values
SCGCQ00411296: iMR FW NVDATA change for global fault/activity LED