|
|
本次為重大升級，同時亦大幅提升了對SSD的兼容性
LSI Mega RAID firmware (MegRAID release 3.6)
************************************
LSI Logic MegaRAID Firmware Release
************************************
Release date: 03/05/09
======================
Supported Controllers:
======================
MegaRAID SAS 8704ELP
MegaRAID SAS 8704EM2
MegaRAID SAS 8708ELP
MegaRAID SAS 8708EM2
MegaRAID SAS 8880EM2
MegaRAID SAS 8888ELP
Component:
=========
SAS MegaRAID Firmware Release for MegaRAID 1078 Controllers
Release date: 03/05/09
Version Numbers:
===============
Current Firmware Package: 11.0.1-0008 (EF-M3)
Current Package Details: APP-1.40.32-0580_BB-1.00.00.01-0011_BIOS-2.06.00_WEBBIOS-2.2-16-e_8-Rel
Previous Firmware Package: 9.1.1-0013 (EF-M0)
Previous Package Details: APP-1.40.02-0514_BB-1.00.00.01-0011_BIOS-2.02.00_WEBBIOS-2.2-13-e_6-Rel
Bug Fixes and Enhancements:
===========================
Firmware:
LSID100106566 (CO) CR_Ref# LSID100093647: Stager spin-up funciton
LSID100106621 (CO) CR_Ref# LSID100101862: SMARTer with SSD
LSID100106571 (CO) EF maintenance port for CR 95311
LSID100106572 (CO) CR_Ref# LSID100101274: Delay between first OOB and detecting devices
LSID100106570 (CO) CR_Ref# LSID100094192: Add support for PFA's to SGPIO Backplanes
LSID100106573 (CO) CR_Ref# LSID100099745: Add Eagle Ray IDs to HW SAS driver and FW
LSID100106557 (CO) LSID100099920: Please add OEM PnP ID in firmware Change order
LSID100107494 (CO) CR_Ref# LSID100100650: Provide the complete Sense data log file
LSID100107661 (CO) CR_Ref# LSID100092613: CTO Enable / Disable In MegaRAID Utilites
LSID100107650 (CO) CR_Ref# LSID100096547: Implement SMARTCopyBack independent with CopyBack.
LSID100108950 (CO) Auto Generated from PR LSIP200008457 for component
LSID100108955 (CO) Auto Generated from PR LSIP200008897 for component
LSID100099332 (CO) CR_Ref# LSID100071361: 4 port version of Ruchbah, PNP ID’s for 8704EM2
LSID100100280 (CO) CR_Ref# LSID100093417: support cache configurations >512 i.e. 1G, 4G
LSID100100669 (CO) Creating CO for BBU changes
LSID100101679 (CO) CR_Ref# LSID100096252: Modify battery learn cycle message
LSID100106447 (CO) CR_Ref# LSID100100223: Black Rock 'Auto Rebuild' change
LSID100100385 (CO) CR_Ref# LSID100095261: Performance enhancement. Adjustable IOs/PD ratio
LSID100100371 (DFCT) Copyback retstarts on reboot.
LSID100100708 (DFCT) Use the new PL Version for EF Maintenance 1 SAS1_FW_Ph_13 01.25.73.00
LSID100101534 (DFCT) Abnormal behavior observed while running Patrol Read on SSD drives.
LSID100100653 (DFCT) Double medium errors during READ
LSID100102001 (DFCT) Code Review Defect
LSID100101619 (DFCT) Debug log fills up with timeout messages when read/write from tape drive
LSID100101127 (DFCT) “OS not found” happens in 1078 HWR when error occurred on the DDF anchor of OS drive.
LSID100108799 (DFCT) “OS not found” happens in 1078 HWR when error occurred on the DDF anchor of OS drive.
LSID100098709 (DFCT) Incorrect Mode setting for SMART by SAS1078 and SAS1068 firmware.
LSID100106539 (DFCT) Do not fail the source drive when LD is degraded
LSID100106647 (DFCT) Performance drop for heavy queue depth random write workloads with SATA/NCQ-only config
LSID100100418 (DFCT) No event sent from firmware when changing MR_CTRL_PROP.SSDSMARTerEnabled
LSID100100595 (DFCT) SAS1078 FW doesn't log "Uncorrectable Medium Error" properly in SAS/SATA RAID0,1,10 environment.
LSID100106489 (DFCT) Possible data integrity issue happens when do the AC power-off after the data(file) write during the rebuild in EFv514 with iBBU.
LSID100106945 (DFCT) Boot messages are not cleared with EFI driver
LSID100102090 (DFCT) Current write cache policy becomes WB in EF FW v514 even battery has not yet completed the initial learn cycle.
LSID100102099 (DFCT) EF v514 FW doesn’t respond in case of detecting Recovery Write Error caused by source medium error during rebuild on RAID6.
LSID100106833 (DFCT) PD status are changed from online to missing
LSID100108800 (DFCT) PD status are changed from online to missing
LSID100102294 (DFCT) FW sending unknown command to HDD when NCQ Enabled which causes montask or drive not detected.
LSID100107245 (DFCT) MegaSCU -AdpEventLog -GetEvents command causes system freeze; genearates infinite size log file
LSID100106733 (DFCT) Long IO problem – this happens after the first boot and take about 1.8-2 sec between IOs Need fix in CR
LSID100102286 (DFCT) VPD page 89h data not correct with Estatoah Falls firmware
LSID100107564 (DFCT) Cache data discard
LSID100107530 (DFCT) The system hit montask while running IO & CC
LSID100107529 (DFCT) SAS1078 FW marks the drive dead even there are errors in SAS/SATA RAID 5/6 configuration. RAID0/1/10 are OK.
LSID100108554 (DFCT) PR next start time is incorrect
LSID100108476 (DFCT) Patrol Read next start time when system down is not following the spec.
LSID100108487 (DFCT) MDC(Make Data Consistent) scheduler is set to weekly in Estatoah Falls firmware.
LSID100106580 (DFCT) ATA-Passthrough using SAT layer - issue with write sector pass through command
LSID100108473 (DFCT) LTO media re-loaded(inserted) automatically due to HWR FW SSU(1B) command.
LSID100109058 (DFCT) FW changes for the CR:LSID100094192
LSID100109082 (DFCT) Official firmware Write Verify retry patch to fix DDF Sense Errors at 1-sec drive-timeout
LSID100108599 (DFCT) Fault LED for HDD Slot #0 on SES enclosure has been turned ON unexpectedly
LSID100108660 (DFCT) no Fault LED turned on when a configured drive was removed
LSID100097100 (DFCT) Read Ahead modes do not vary performance as expected
LSID100099267 (DFCT) SAS1078 FW doesn' t mark the drive dead even there are errors in SAS/SATA RAID 1,10 configuration.
LSID100100195 (DFCT) SAS1078 FW doesn' t mark the drive dead even there are errors in SAS/SATA RAID 1,10 configuration.
LSID100098713 (DFCT) 1078 FW marks SmartCopyBack source drive dead as “Unconfigure&Bad” after completing SMART Copy Back.
LSID100099441 (DFCT) CC starts when factory defaults are set on controller
LSID100099477 (DFCT) BP slot ordering
LSID100099922 (DFCT) Drive marked unconfigured bad after removal/insertion
LSID100100409 (DFCT) EF2: Data miscompare while running IO on Vds of various StripeSize
LSID100099957 (DFCT) DDR min RAS timing should be min() of hw max and DIMM value specified in SPD
LSID100100020 (DFCT) Alarm not fired on Nankang
LSID100100935 (DFCT) Firmware does not monitor battery parameters
LSID100092717 (DFCT) In ARA mode, RA does not work
LSID100098945 (DFCT) Use GPIO1 as CHARGE_COMPLETE indicator
LSID100100520 (DFCT) Improved error handling for Maxim DS2731 charger
LSID100101061 (DFCT) I2C Arbitration issue for 1078 blade controller
LSID100098972 (DFCT) HWR FW marks drive dead after receiving Sense 0x03,11,00 (ECC Error) for recovery write (SCSI CDB 0x2E) using SATA HDD.
LSID100100231 (DFCT) LION battery max error =25% after relearn
LSID100100389 (DFCT) Gap in Read Ahead with RAID 10 and Direct IO
LSID100100651 (DFCT) Zoned out drive in balde DSS generate pop up errors
LSID100101979 (DFCT) Second re-learn does not kick-in
LSID100101574 (DFCT) SATA drives drop off the BUS after PL reset
LSID100083790 (DFCT) Possible data integrity issue happens when do the AC power-off after the data(file) write during the rebuild in EFv514 with iBBU.
LSID100083796 (DFCT) Hitting Data Integrity issue with medium errors on R5 while running remove/insert --> rebuild --> complete
LSID100083858 (DFCT) Possible data integrity issue occurred when reconstruction found uncorrectable media error.
LSID100099592 (DFCT) The keyid is not getting changed after sucessful foreign import.
LSID100095625 (DFCT) 1068 and 1078 exhibit delayed writes (7-8s) during 4k random write workload.
LSID100100480 (DFCT) Credit mismatch error in 1068 and 1078 controllers
LSID100100551 (DFCT) Credit mismatch error in 1068 and 1078 controllers
LSID100100557 (DFCT) Credit mismatch error in 1068 and 1078 controllers
LSID100099308 (DFCT) Battery removed event when battery is still connected
LSID100097851 (DFCT) 1078 FW never sets the next schedule of Patrol Read.
LSID100101515 (DFCT) 1078 FW never sets the next schedule of Patrol Read.
LSID100097925 (DFCT) 1078 FW Patrol Read cannot run in the certain condition.
LSID100101517 (DFCT) 1078 FW Patrol Read cannot run in the certain condition.
Firmware Download：
http://www.lsi.com/DistributionS ... PP-1.40.32-0580.zip
Remark：
請注意，此Firmware只適用於LSI MegaRAID SAS 8704ELP、8708ELP、8888ELP等LSI 1078 Base的Raid Card使用，而LSI 8308ELP、8344ELP等LSI 1068 Base的Raid Card絕對不能使用。 |
|
IP卡
狗仔卡
发表于 2009-3-7 03:49
QQ好友和群
收藏
分享
好贴
烂贴
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
楼主