|
扇区已经不稳定了,我觉得能修就拿去修吧,前段时间刚问题了一块3201ABYS
而且我现在觉得HDtune看S.M.A.R.T.,有些数值好像监控的尺度不一样。
比如你的C6项数值已经1了,我的3201ABYS一开始就是C6变1了(但C5还是0),然后跑HDtune出红块,清空,快速格式化以后HDtune红块消失(看来是逻辑坏道了)。使用WD自己的软件Data Lifeguard Diagnostic for Windows能通过完整测试,但是不能通过快速检测,于是还是送修。
建议楼主看看这里
http://en.wikipedia.org/wiki/S.M.A.R.T.
维基百科关于S.M.A.R.T.的详细说明,其中橙色都是关键项,后果写的很详细
197 C5 Current Pending Sector Count Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
198 C6 Uncorrectable Sector Count The total number of uncorrectable errors when reading/writing a sector. A rise in the value of this attribute indicates defects of the disk surface and/or problems in the mechanical subsystem. (or Off-Line Scan Uncorrectable Sector Count – Fujitsu)[15]
从上面叙述的来看,C5变1貌似问题还不是很大,只是扇区不太稳定了,C6如果上升则说明磁盘表面或者机械系统存在问题。
奇怪的是hdtune认为C6项变1还不算黄,用CrystalDiskInfo就报黄了
祝楼主好运了 |
|