LSI MegaRAID SAS 9260-8i / 9261-8i / 9280-8e New Firmware Release - 03/06/2011

idolclub

**********************************

LSI Corp. MegaRAID Firmware Release

**********************************

Release date: 03/04/11

======================
Supported Controllers:
======================

MegaRAID SAS 9260-4i
MegaRAID SAS 9260-8i
MegaRAID SAS 9260DE-8i
MegaRAID SAS 9261-8i
MegaRAID SAS 9280-4i4e
MegaRAID SAS 9280-8e
MegaRAID SAS 9280DE-8e


Component:
=========
SAS MegaRAID Firmware Release for MegaRAID Controllers
Release date: 03/04/11


Version Numbers:       
===============
Current Firmware Package:    12.12.0-0045
Current Package Details:
APP-2.120.33-1197_BB-2.02.00.00-0000_BIOS-3.21.00_4.11.05.00_0x05000000_HII-_WEBBIOS-6.0-34-e_29-Rel_PCLI-04.04-01700008_BOOT-01.250.04.219_NVDATA-2.09.03-0010_2011_02_25
                             
Previous Firmware Package:    12.12.0-0036
Previous Package Details:
APP-2.120.13-1094_BB-2.02.00.00-0000_BIOS-3.20.00_4.11.05.00_0x0418A000_WEBBIOS-6.0-32-e_27-Rel_PCLI-04.04-01700008_BOOT-01.250.04.219_NVDATA-2.09.03-0010_2010_12_06                   
                             

Firmware:
=========
LSIP200145892 (DFCT) (RW LSIP200121969) FW 10M09 cause system (sles11sp1/rhel6) reset while lspci -vvxxx is used
LSIP200153318 (DFCT) FW doesn detect the iBBU08 if it is remotely mounting with OEM's Castor controller
LSIP200141662 (CO) (auto4comp FW_SAS_LSI) Deliver HII in Q1 2011 Liberator maintenance
LSIP200142547 (DFCT) Provide mechanism to bypass settings delayPOST and envDelaySOD
LSIP200143179 (DFCT) (CL LSIP200142502) Return status code 'Success' to certain obsolete SCSI commands
LSIP200139759 (DFCT) (CL LSIP200121783) With multipath setting, potential data integrity issue while IOs across 2 enclosures
LSIP200143213 (DFCT) (CL LSIP200136622) potential I/O miscompares when issue OCR.
LSIP200121969 (DFCT) FW 10M09 cause system (sles11sp1/rhel6) reset while lspci -vvxxx is used
LSIP200071988 (DFCT) Inconsistent drive state after drives are changed to different slots.
LSIP200139722 (DFCT) (CL LSIP200095564) Controller hit montask during BGI
LSIP200139711 (DFCT) (CL LSIP200096531) fw hit montask at pd.c when rebuilding from raid 6
LSIP200139713 (DFCT) (CL LSIP200085772) Clear configured with SSC degraded causing FW went to mon_tsk()
LSIP200139762 (DFCT) (CL LSIP200125260) Configured PDs become not supported PDs, LDs dropping offline.
LSIP200104775 (DFCT) Controller reports "phy is bad" for single port with any SATA device
LSIP200139764 (DFCT) (CL LSIP200095287) HSP commissioned alarm beep goes away after reboot
LSIP200139742 (DFCT) (CL LSIP200086083) sscd show 0 byte in debugger and MSM
LSIP200139756 (DFCT) (CL LSIP200099072) ekms bios is not enable
LSIP200139728 (DFCT) (CL LSIP200089519) FW aborts the recovery resulting SES not responding
LSIP200139758 (DFCT) (CL LSIP200095566) Drive comes up as unconfigured bad while running power cycle and error injection script
LSIP200123091 (DFCT) DateOfFirstuse is Incorrectly Causing BBU Deep Discharge Requirement


WebBIOS:
========
LSIP200123117 (DFCT) Using the "+" character caused uEFI WebBIOS to replace the + with a space and fail.


BIOS:
========
LSIP200134837 (DFCT) FW revision is not displayed in the Bios' controller list
LSIP200141091 (DFCT) Remove JBOD message form BIOS POST

Installation:
=============
Use MegaCLI to flash the SAS controllers.  MegaCLI can be downloaded from the support and download
section of www.lsi.com

Command syntax:  MegaCli -adpfwflash -f mr2108fw.rom -a0


Download:
http://www.lsi.com/DistributionS ... gr.aspx?asset=56647

per1-q1222

看來LSISAS2108的MegaRAID版本更新到此為止...

jimmyjin

per1-q1222 发表于 2011-3-6 18:58
看來LSISAS2108的MegaRAID版本更新到此為止...

2208才出来就一脚踢开2108吗？ 我好寒心.......