GPU服务器 超微4027GR-TRT支持8片Tesla K20C K20X K40C K40M 超级并行计算服务器

jbd666

Integrated Board [url=][/url] [url=]Super X9DRG-OTF-CPU[/url] Key Features 8x GPUs in 4U 1. Dual socket R (LGA 2011) supports     Intel® Xeon® processor E5-2600     and E5-2600 v2 family† 2. Up to 1.5TB ECC DDR3, up to 1866MHz;     24x DIMM sockets 3. Expansion slots:     8 PCI-E 3.0 x16 (double-width) slots     2 PCI-E 3.0 x8 (in x16) slot     1 PCI-E 2.0 x4 (in x16) slot 4. Intel® X540 Dual port 10GBase-T 5. I/O ports: 2x 10Gb LAN, 1x Dedicated     LAN for IPMI Remote Management,     1x VGA, 10x USB 2.0 6. 24x 2.5" Hot-swap SAS2/SATA3 HDD     Bays 7. 1600W Redundant Power Supplies     Platinum Level (94%+) Available Colors: Black                   [url=]Drivers & Utilities[/url]   [url=]BIOS[/url]   [url=]IPMI[/url]   [url=]Tested MEM[/url]   [url=]Tested HDD[/url]   [url=]Manuals[/url] [url=]OS Certification Matrix[/url]     [url=]Compatible GPU List[/url]

Product SKUs SYS-4027GR-TRT SuperServer 4027GR-TRT (Black) Motherboard [url=]Super X9DRG-OTF-CPU[/url] Processor/Cache CPU Intel® Xeon® processor E5-2600     and E5-2600 v2 family†     (up to 150W TDP **) Dual Socket R (LGA 2011) Cache Up to 30MB System Bus QPI up to 8 GT/s Note † BIOS version 3.0 or above is required Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support [url=]GPU/Xeon Phi Support[/url] K10/K20/K20X/K1/K2 (Kepler), up to 150W CPU at 30°C K40 (Atlas), up to 150W CPU at 30°C [url=]Xeon Phi[/url], up to 150W CPU at 30°C System Memory Memory Capacity 24x 240-pin DDR3 DIMM sockets Up to 1.5TB DDR3 ECC LRDIMM Up to 768GB DDR3 ECC RDIMM Up to 192GB DDR3 ECC/non-ECC UDIMM Memory Type 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB Memory Voltage 1.5 V, 1.35 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) On-Board Devices Chipset Intel® C602 chipset AHCI SATA SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1 SCU SATA SATA 2.0 3Gbps with RAID 0, 1, 10 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC Network Controllers Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBase-T , 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) Graphics Matrox G200 (Nuvoton WPCM450 BMC) Super I/O Nuvoton W83527HG Input / Output AHCI SATA 2x SATA 3.0 ports (6Gbps) 4x SATA 2.0 ports (3Gbps) SCU SATA 4x SATA 2.0 ports (3Gbps) LAN 2x RJ45 10GBase-T ports 1x dedicated LAN port for IPMI USB 10x USB 2.0 ports total (4x rear + 4x via header + 2x Type A) Serial Port / Header 1x Fast UART 16550 ports: 1 header System BIOS BIOS Type 16MB SPI Flash EEPROM with AMI® BIOS BIOS Features Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support Chassis Form Factor 4U Rackmountable Rackmount Kit (MCP-290-00057-0N) Model CSE-418GTS-R3200B Dimensions Height 7.0" (178mm) Width 17.2" (437mm) Depth 29" (737mm) Weight Net Weight: 80 lbs (36.2 kg) Gross Weight: 135 lbs (61.2 kg) Available Colors Black Drive Bays Hot-swap 24x 2.5" Hard drive bays Expansion Slots PCI-Express 8x PCI-E 3.0 x16 (double-width) slots 2x PCI-E 3.0 x8 (in x16) slot 1x PCI-E 2.0 x4 (in x16) slotli> Backplane SAS/SATA HDD Backplane System Cooling Fans 8x 92mm RPM Hot-Swappable Cooling Fans Shrouds 1x Air Shroud (MCP-310-84806-0B) 1x Air Shroud (MCP-310-84807-0B) Power Supply 1000W/1600W 1U Redundant Power Supply AC Input 1000W @ 100-127V, 12.9A Max., 50-60Hz 1600W @ 200-240V, 9.5A Max., 50-60Hz DC Output 1000W: +12V/82A; +12Vsb/2A 1600W: +12V/132A; +12Vsb/2A Certification [url=][/url]  Platinum Level   (Cert. in progress) PC Health Monitoring CPU Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages. 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V FAN 4-pin fan headers with tachometer status monitoring Low noise fan speed control mode Temperature Monitoring for CPU and system environment Thermal Control for 8x fan connectors Other Features Chassis intrusion detection Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature:    10°C to 35°C (50°F to 95°F) Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:    8% to 90% (non-condensing) Non-operating Relative Humidity:    5% to 95% (non-condensing)

	[url=]See Parts List[/url]
Parts List - (Items Included) Part Number Qty Description Motherboard / Chassis MBD-X9DRG-OTF-CPU CSE-418GTS-R3200B 1 1 Super X9DRG-OTF-CPU Motherboard CSE-418GTS-R3200B 4U Chassis with 24x HDD trays Air Shroud MCP-310-41806-0B 1 Mylar CPU air shroud for SC418G (X9DRG-OF-CPU),PBF Air Shroud MCP-310-41807-0B 1 Mylar PCIe air shroud for SC418G (X9DRG-O-PCIE),PBF Backplane BPN-SAS3-216A 1 24x 2.5"HDD backplane, support SAS-3 12Gb/s,mini-SAS HD connector,new 29-pin SAS-3 receptacles,support power control stagger spin,pre-charge resistor,fuse protect and SGPIO encl mgmt,RoHS/REACH,PBF Cable 1 CBL-PWEX-0582 8 8 pin to two 6+2 pin 12V GPU power cable, 30 cm 16/20 AWG,HF,RoHS/REACH,PBF Cable 2 CBL-SAST-0591 2 cross-over mini SAS HD to 4 SATA w/SB, S. 75cm. 30AWG,HF,RoHS/REACH,PBF Cable 3 CBL-0449L 2 HDD power extension for X8OBN, special 8 pin to 4 HDD. 47cm. 18AWG Riser Card RSC-X9DRG-O 4 RSC-X9DRG-O Heatsink / Retention SNK-P0048PS 2 2U Passive CPU Heat Sink for X9 Generation Motherboards w/ Narrow ILM Power Supply PWS-1K66P-1R 4 1U 1600W Redundant Platinum Power Supply 73.5mm width,RoHS/REACH,PBF Cable 4 CBL-0071L 1 ROUND 16 pin TO 16 PIN RIBBON FP CABLE 30 Cable 5 CBL-0174L 4 US power cord 14AWG 6ft, PBF.2.08mm^2 Fan 1 FAN-0151L4 8 92x92x38 mm, 11.5K RPM, SC418G Middle Fan w/ Housing,RoHS/REACH,PBF Tray(s) MCP-220-00047-0B 24 Black gen 3rd hot-swap 2.5inch HDD tray Tray(s) MCP-290-21301-0B 3 Black 2.5\" HDD dummy cover for SC213,216 (Cover 8 HDD) Mounting Rails MCP-290-00060-0N 1 Threaded rail adapter default for round hole rack Mounting Rails MCP-290-00057-0N 1 set Rail set, quick/quick, default for 4U 17.2 [url=]Hide Parts List[/url]