华擎K8NF4G-SATA2 难道真的不能超频？？？

李炜江

买了块华擎K8NF4G-SATA2 C51主板，在BIOS超频选项里不能调节HT倍频，导致2500+几乎超不了。内存的选项到是很全。CPU连电压都挑不了。
, c# l. g2 J$ Y1 J4 I很多XXXXX Spread Spectrum的选项，到底有什么用？？

请达人指导
7 V( P$ m7 o$ X, f% u
具体选项如下

. M) ^7 |1 _  Y# }Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Cnfiguration
options: [Auto], [CPU, PCIE, Sync.] and [CPU, PCIE, Async.].
- O( P% s4 V2 e+ n( i9 `
. w& [; n$ }+ ^CPU Frequency (MHz)
Use this option to adjust CPU frequency. The range is from 140MHz to
300MHz. The default value is [200].
* T3 K' v: k9 ]# j5 y
4 e  {/ e: p0 q; R2 l  wPCIE Frequency (MHz)
Use this option to adjust PCIE frequency. The range is from 70MHz to
4 O6 w1 _2 U. {9 `8 X150MHz. The default value is [100].

7 a4 P. q6 O9 QBoot Failure Guard
+ f# x; \% e# f' H" w: q0 PEnable or disable the feature of Boot Failure Guard.
! J9 }, u* {  e, l9 d6 f# ]1 x
! ]' ~8 l1 S" wCPU Spread Spectrum
This feature will be set to [Center Spread] as default. Configuration
options: [Disabled], [Center Spread], and [Down Spread].

2 \2 M7 Y& I% t/ LPCIE Spread Spectrum
This feature will be set to [Enabled] as default. Configuration
1 |2 ^' U2 ^% m+ G* k- Ioptions: [Disabled], and [Enabled].

4 H) S& V/ d( P, W# pSATA Spread Spectrum
& V- W' H0 L' Z, IThis feature will be set to [Enabled] as default. Configuration
options: [Disabled], and [Enabled].
3 V! ]/ u% A& ^+ ?% T+ A
' u1 Y( n! U" l" @# |7 DHT Spread Spectrum
1 g& O$ ~3 `2 }. r- o) hThis feature will be set to [Center Spread] as default. Configuration
options: [Disabled], [Center Spread], and [Down Spread].

; e' l/ D4 Q5 S  u  y" ACool ‘n’ Quiet
Use this item to enable or disable AMD’s Cool ‘n’ QuietTM technology.

李炜江

我说呢，怎么看网站的测试版BIOS和零售版的不一样

CGAC

有没有人用K8NF4G-SATA2上过300外频？

李炜江

我最多上到280

CGAC

原帖由 李炜江 于 2005-11-26 12:49 发表
我最多上到280

7 x7 |; q. l9 {8 w+ L排除cpu的素质因素吗？

李炜江

没有，一直用的这个板子
不过应该是主板的问题，现在主板不能锁定DDR频率，我现在工作在270外频，内存必须设成DDR333，在XP下看实际工作在214